Guide to running multiple GPU work units

Norton · Nov 29, 2012

Running the HCC GPU and CPU wu's only seems to be doing well (8 GPU wu's on 4 cores plus 4 CPU wu's on the other 4 cores). I think I can hit close 100k ppd on the rig with this setup! :toast:

The 7870 is just a bit laggy when using the TV tuner but otherwise the rig runs fine and is actually 4-5C cooler than running with all CPU wu's

vawrvawerawe · Nov 29, 2012

What is WCG and I have crossfire so do I need to do anything special?

WCG website will not load for me.

t_ski · Nov 29, 2012

Basically, it's disctributed computing. If you decide to take the plunge, it helps to turn crossfire off for stability.

[Ion] · Nov 29, 2012

Norton said:
Running the HCC GPU and CPU wu's only seems to be doing well (8 GPU wu's on 4 cores plus 4 CPU wu's on the other 4 cores). I think I can hit close 100k ppd on the rig with this setup!

The 7870 is just a bit laggy when using the TV tuner but otherwise the rig runs fine and is actually 4-5C cooler than running with all CPU wu's

Wow--that's awesome! :toast:

So basically you're getting the same PPD from 1 GPU that I'm getting from 3 :eek:

@DIT @ vawrvawerawe: WCG is a project started and partially funded by IBM that uses volunteer computers to do humanitarian scientific research. If you're interested in joining, look at the link in my signature in post in our WCG/BOINC thread :toast:

Aquinus · Nov 30, 2012

vawrvawerawe said:
I have crossfire so do I need to do anything special?

Nope, BOINC is intelligent enough to work around CFX being enabled however I did notice a little boost in performance when I disable CFX. I don't like turning it on and off all the time so I just leave it on.

I think it is time for me to run multiple WUs on my 6870s. I have a feeling that I can at least double my output.

Edit: So I reinstalled BOINC, threw my app_info.xml file in and now I'm not getting any projects at all. Communication is being established but it isn't getting anything new. I am getting some "File referenced in app_info.xml does not exist: <name of task>" errors, but I would assume that is because no projects have been downloaded yet?

Edit 2: I should have just read the OP and installed the version off WCG's website. Doh! Now stuff is almost ready to transfer but isn't. :|

Any idea why this is happening?

Code:

[error] No URL for file transfer of wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1
[error] No URL for file transfer of hcckernel.cl.7.05
[error] No URL for file transfer of wcg_hcc1_img_7.05_windows_intelx86

My app_info.xml is this:

Code:

<app_info> 
	<app> 
		<name>hcc1</name> 
		<user_friendly_name>Help Conquer Cancer</user_friendly_name> 
	</app> 
	<file_info> 
		<name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</name> 
		<executable/> 
	</file_info> 
	<file_info> 
		<name>hcckernel.cl.7.05</name> 
		<executable/> 
	</file_info> 
	<file_info>
		<name>wcg_hcc1_img_7.05_windows_intelx86</name>
		<executable/>
   </file_info>
	<app_version> 
		<app_name>hcc1</app_name> 
		<version_num>705</version_num> 
		<platform>windows_intelx86</platform> 
		<plan_class>ati_hcc1</plan_class> 
		<avg_ncpus>0.33</avg_ncpus> 
		<max_ncpus>1.0</max_ncpus> 
			<coproc> 
				<type>ATI</type> 
				<count>.33</count> 
			</coproc> 
		<file_ref> 
			<file_name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</file_name> 
			<main_program/> 
		</file_ref> 
		<file_ref> 
			<file_name>hcckernel.cl.7.05</file_name> 
			<open_name>hcckernel.cl</open_name> 
		</file_ref> 
	</app_version>
	<app_version>
		<app_name>hcc1</app_name>
		<version_num>705</version_num>
		<platform>windows_intelx86</platform>
		<avg_ncpus>1.000000</avg_ncpus>
		<max_ncpus>1.000000</max_ncpus>
		<api_version>6.13.0</api_version>
		<file_ref>
			<file_name>wcg_hcc1_img_7.05_windows_intelx86</file_name>
			<main_program/>
		</file_ref>
	</app_version>
</app_info>

Another edit: I think I was able to reset the project and it started downloading.

t_ski · Nov 30, 2012

Aquinus said:
Nope, BOINC is intelligent enough to work around CFX being enabled however I did notice a little boost in performance when I disable CFX. I don't like turning it on and off all the time so I just leave it on.

I think it is time for me to run multiple WUs on my 6870s. I have a feeling that I can at least double my output.

Edit: So I reinstalled BOINC, threw my app_info.xml file in and now I'm not getting any projects at all. Communication is being established but it isn't getting anything new. I am getting some "File referenced in app_info.xml does not exist: <name of task>" errors, but I would assume that is because no projects have been downloaded yet?

Edit 2: I should have just read the OP and installed the version off WCG's website. Doh! Now stuff is almost ready to transfer but isn't. :|

Any idea why this is happening?

Code:

[error] No URL for file transfer of wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1 [error] No URL for file transfer of hcckernel.cl.7.05 [error] No URL for file transfer of wcg_hcc1_img_7.05_windows_intelx86

My app_info.xml is this:

Code:

<app_info> <app> <name>hcc1</name> <user_friendly_name>Help Conquer Cancer</user_friendly_name> </app> <file_info> <name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</name> <executable/> </file_info> <file_info> <name>hcckernel.cl.7.05</name> <executable/> </file_info> <file_info> <name>wcg_hcc1_img_7.05_windows_intelx86</name> <executable/> </file_info> <app_version> <app_name>hcc1</app_name> <version_num>705</version_num> <platform>windows_intelx86</platform> <plan_class>ati_hcc1</plan_class> <avg_ncpus>0.33</avg_ncpus> <max_ncpus>1.0</max_ncpus> <coproc> <type>ATI</type> <count>.33</count> </coproc> <file_ref> <file_name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</file_name> <main_program/> </file_ref> <file_ref> <file_name>hcckernel.cl.7.05</file_name> <open_name>hcckernel.cl</open_name> </file_ref> </app_version> <app_version> <app_name>hcc1</app_name> <version_num>705</version_num> <platform>windows_intelx86</platform> <avg_ncpus>1.000000</avg_ncpus> <max_ncpus>1.000000</max_ncpus> <api_version>6.13.0</api_version> <file_ref> <file_name>wcg_hcc1_img_7.05_windows_intelx86</file_name> <main_program/> </file_ref> </app_version> </app_info>

Another edit: I think I was able to reset the project and it started downloading.

I believe the issue is that those three files are not installed by default but the app_info file is calling them. Resetting the project without the app_info file will usually take care of it, then suspend/get no more work, close BOINC, insert the file and restart.

stinger608 · Dec 1, 2012

Okay, here is the code that I just started running:

Code:

<app_info> 
	<app> 
		<name>hcc1</name> 
		<user_friendly_name>Help Conquer Cancer</user_friendly_name> 
	</app> 
	<file_info> 
		<name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</name> 
		<executable/> 
	</file_info> 
	<file_info> 
		<name>hcckernel.cl.7.05</name> 
		<executable/> 
	</file_info> 
	<file_info>
		<name>wcg_hcc1_img_7.05_windows_intelx86</name>
		<executable/>
   </file_info>
	<app_version> 
		<app_name>hcc1</app_name> 
		<version_num>705</version_num> 
		<platform>windows_intelx86</platform> 
		<plan_class>ati_hcc1</plan_class> 
		<avg_ncpus>0.5</avg_ncpus> 
		<max_ncpus>4.0</max_ncpus> 
			<coproc> 
				<type>ATI</type> 
				<count>.250</count> 
			</coproc> 
		<file_ref> 
			<file_name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</file_name> 
			<main_program/> 
		</file_ref> 
		<file_ref> 
			<file_name>hcckernel.cl.7.05</file_name> 
			<open_name>hcckernel.cl</open_name> 
		</file_ref> 
	</app_version>
	<app_version>
		<app_name>hcc1</app_name>
		<version_num>705</version_num>
		<platform>windows_intelx86</platform>
		<avg_ncpus>1.000000</avg_ncpus>
		<max_ncpus>1.000000</max_ncpus>
		<api_version>6.13.0</api_version>
		<file_ref>
			<file_name>wcg_hcc1_img_7.05_windows_intelx86</file_name>
			<main_program/>
		</file_ref>
	</app_version>
</app_info>

I have several WU's showing "Ready to Start" with my video card, however none of them are running. I have 8 WU's running with the CPU with this configuration, however none of the GPU WU's are running.

Any ideas? Shouldn't there be 4 GPU WU's running?

mstenholm · Dec 1, 2012

stinger608 said:

Okay, here is the code that I just started running:

Code:

<app_info> 
	<app> 
		<name>hcc1</name> 
		<user_friendly_name>Help Conquer Cancer</user_friendly_name> 
	</app> 
	<file_info> 
		<name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</name> 
		<executable/> 
	</file_info> 
	<file_info> 
		<name>hcckernel.cl.7.05</name> 
		<executable/> 
	</file_info> 
	<file_info>
		<name>wcg_hcc1_img_7.05_windows_intelx86</name>
		<executable/>
   </file_info>
	<app_version> 
		<app_name>hcc1</app_name> 
		<version_num>705</version_num> 
		<platform>windows_intelx86</platform> 
		<plan_class>ati_hcc1</plan_class> 
		<avg_ncpus>0.5</avg_ncpus> 
		[B]<max_ncpus>4.0</max_ncpus> [/B]
			<coproc> 
				<type>ATI</type> 
				<count>.25[B]0[/B]</count> 
			</coproc> 
		<file_ref> 
			<file_name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</file_name> 
			<main_program/> 
		</file_ref> 
		<file_ref> 
			<file_name>hcckernel.cl.7.05</file_name> 
			<open_name>hcckernel.cl</open_name> 
		</file_ref> 
	</app_version>
	<app_version>
		<app_name>hcc1</app_name>
		<version_num>705</version_num>
		[B]<platform>windows_intelx86</platform>
		<avg_ncpus>1.000000</avg_ncpus>
		<max_ncpus>1.000000</max_ncpus>
		<api_version>6.13.0</api_version>
		<file_ref>
			<file_name>wcg_hcc1_img_7.05_windows_intelx86</file_name>
			<main_program/>[/B]
		</file_ref>
	</app_version>
</app_info>

I have several WU's showing "Ready to Start" with my video card, however none of them are running. I have 8 WU's running with the CPU with this configuration, however none of the GPU WU's are running.

Any ideas? Shouldn't there be 4 GPU WU's running?

I marked a few things in your file that differs from mine. Did you allow GPU work (Activities, Always allow GPU work or something like that, I have a Danish version). The file below works for me for 6 GPU (just change from 0.16 to 0.25) and no other work (i.e. CPU)

<app_info>
<app>
<name>hcc1</name>
<user_friendly_name>Help Conquer Cancer</user_friendly_name>
</app>
<file_info>
<name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</name>
<executable/>
</file_info>
<file_info>
<name>hcckernel.cl.7.05</name>
<executable/>
</file_info>
<app_version>
<app_name>hcc1</app_name>
<version_num>705</version_num>
<platform>windows_intelx86</platform>
<plan_class>ati_hcc1</plan_class>
<avg_ncpus>1.0</avg_ncpus>
<max_ncpus>1.0</max_ncpus>
<coproc>
<type>ATI</type>
<count>0.16</count>
</coproc>
<file_ref>
<file_name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>hcckernel.cl.7.05</file_name>
<open_name>hcckernel.cl</open_name>
</file_ref>
</app_version>
</app_info>

stinger608 · Dec 1, 2012

Okay what does this refer to? "[error]No application found for task: windwos_intelx86 640; discarding"??????????

I have a bunch of these.

KieX · Dec 1, 2012

stinger608 said:
Okay what does this refer to? "[error]No application found for task: windwos_intelx86 640; discarding"??????????

I have a bunch of these.

That means the server is sending you work that your app_info file isn't setup to do. You should log into the WCG page and make sure the profile you set for your computer has only the projects you setup in the app_info (which in this case I imagine is HCC). Whilst there, under the projects list there should be an option to process work on GPU (maybe that's why you weren't receiving GPU WU to crunch?)

stinger608 · Dec 1, 2012

KieX said:
That means the server is sending you work that your app_info file isn't setup to do. You should log into the WCG page and make sure the profile you set for your computer has only the projects you setup in the app_info (which in this case I imagine is HCC). Whilst there, under the projects list there should be an option to process work on GPU (maybe that's why you weren't receiving GPU WU to crunch?)

Okay, now I know that the different work can be added to the app_info, but where is that added in the code?

KieX · Dec 1, 2012

stinger608 said:
Okay, now I know that the different work can be added to the app_info, but where is that added in the code?

Well, the format of the file is explained here, if you want to add something else to it: http://boinc.berkeley.edu/wiki/Anonymous_platform

This thread on XS has the code for the other projects: http://www.xtremesystems.org/forums/showthread.php?283509-Working-app_info-files

I've not dabbed into it myself, but Norton I believe has set it up though with some problems on GFAM. Might be worth shooting him a PM?

Norton · Dec 1, 2012

KieX said:
Well, the format of the file is explained here, if you want to add something else to it: http://boinc.berkeley.edu/wiki/Anonymous_platform

This thread on XS has the code for the other projects: http://www.xtremesystems.org/forums/showthread.php?283509-Working-app_info-files

I've not dabbed into it myself, but Norton I believe has set it up though with some problems on GFAM. Might be worth shooting him a PM?

I did try it out but the errors were pretty extreme and I don't know enough about the files yet to be able to fix them. The rig ran fine but WCG showed a couple of hundred GFAM errors in less than 24 hrs

KieX · Dec 1, 2012

Norton said:
I did try it out but the errors were pretty extreme and I don't know enough about the files yet to be able to fix them. The rig ran fine but WCG showed a couple of hundred GFAM errors in less than 24 hrs

Did it work fine without GFAM?

Norton · Dec 1, 2012

KieX said:
Did it work fine without GFAM?

Couldn't get it working. Tried a couple of times but I stepped away from it for a little while so I wouldn't keep throwing errors into my WCG file.

Switched to HCC cpu and gpu for now but I have an early Xmas gift coming that will allow me to keep my output up and try the All app_info again early next week

stinger608 · Dec 1, 2012

okay, added the app_info file from xtremesystems. I tweaked the HCC file. Seems to be working so far. Probably too early to tell for sure.

Under the projects tab though, my "work done" number does not seem to be changing or gaining? Even though it has completed about 20 or so work units. Is that normal?

KieX · Dec 1, 2012

Norton said:
Couldn't get it working. Tried a couple of times but I stepped away from it for a little while so I wouldn't keep throwing errors into my WCG file.

Switched to HCC cpu and gpu for now but I have an early Xmas gift coming that will allow me to keep my output up and try the All app_info again early next week

Look forward to whatever it is.

stinger608 said:
okay, added the app_info file from xtremesystems. I tweaked the HCC file. Seems to be working so far. Probably too early to tell for sure.

Under the projects tab though, my "work done" number does not seem to be changing or gaining? Even though it has completed about 20 or so work units. Is that normal?

Can happen sometimes. Best thing to do is check on the WCG page under "Results status" see if you can find recent WU's in Pending Validation list. If it's not coming up might be worth just hitting the updated button a few times and perhaps reboot.

stinger608 · Dec 1, 2012

KieX said:
Can happen sometimes. Best thing to do is check on the WCG page under "Results status" see if you can find recent WU's in Pending Validation list. If it's not coming up might be worth just hitting the updated button a few times and perhaps reboot.

Okay, I see what that is now. Took me a minute. :laugh:

Yea, I have 13 pages of "Pending Validation" going on! About 10 pages are from today alone.

ThE_MaD_ShOt · Dec 2, 2012

Cool Stinger you set man. :toast:

agent00skid · Dec 3, 2012

Decided to test 2 WU's on my laptop.
So far worked fine, even on client 7.0.28.

manofthem · Dec 4, 2012

I'm still waiting for a fix to get multi WUs working on Windows 8. If someone finds a fix, I hope they post it.

Norton · Dec 4, 2012

manofthem said:
I'm still waiting for a fix to get multi WUs working on Windows 8. If someone finds a fix, I hope they post it.

If I found one I would definitely post it for you

Will be bringing an early Xmas gift online later tonight..... :pimp:

manofthem · Dec 4, 2012

Norton said:
If I found one I would definitely post it for you

Will be bringing an early Xmas gift online later tonight.....

You are the Pimp indeed, no jokes :toast:

hat · Dec 4, 2012

I may have discovered my problem:

hat · Dec 4, 2012

Well, I got it working properly. It seems that you need to let the manager download at least one of all of the types of work units mentioned in the app_info file before you actually put the file into place.

System Name	Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor	Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard	Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling	Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory	2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s)	MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage	Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s)	Main PC (2x24" Dell UltraSharp U2414H)
Case	Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s)	Logitech Z625 THX 2.1 speakers
Power Supply	EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse	G300s
Keyboard	Corsair K65
VR HMD	N/A
Software	Windows 10 Pro or Ubuntu
Benchmark Scores	Why sit on the Bench when you can get in the game and Crunch!!!

System Name	My i7 Beast
Processor	Intel Core i7 6800K
Motherboard	Asus X99-A II
Cooling	Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory	4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s)	EVGA 1080 SuperClocked
Storage	Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s)	Three Asus 24" VW246H LCD's
Case	Silverstone TJ07
Audio Device(s)	Onboard
Power Supply	Corsair AX1200
Keyboard	Corsair K95
Software	Windows 10 x64 Pro

System Name	Niedersachsen / Ribe / Minsk
Processor	i3 3240 / i7-3520M / 4x Opteron 6376 @ 2.86GHz
Motherboard	BIOSTAR H61M / HP Q77 / Supermicro H8QG7
Cooling	Stock / Stock / 4x 1U G34
Memory	1x8GB / 2x4GB / 4x4GB
Video Card(s)	GTX260 / Intel HD 4000 / nVidia GT310
Storage	80GB Intel SSD / 256GB Intel SSD / 2x 60GB SSD (RAID1)
Display(s)	Dell 3007 + HP 2245w / 12.1" 1366x768 / None
Case	Antec NSK3480 / HP / Supermicro 1U
Audio Device(s)	Onboard
Power Supply	Enermax 500W / HP 130W / Supermicro Gold 1400W
Keyboard	IBM Model M
Software	Windows 7 (Niedersachsen/Ribe) / Linux Mint 17.2 (Minsk)

System Name	Apollo
Processor	Intel Core i9 9880H
Motherboard	Some proprietary Apple thing.
Memory	64GB DDR4-2667
Video Card(s)	AMD Radeon Pro 5600M, 8GB HBM2
Storage	1TB Apple NVMe, 4TB External
Display(s)	Laptop @ 3072x1920 + 2x LG 5k Ultrafine TB3 displays
Case	MacBook Pro (16", 2019)
Audio Device(s)	AirPods Pro, Sennheiser HD 380s w/ FIIO Alpen 2, or Logitech 2.1 Speakers
Power Supply	96w Power Adapter
Mouse	Logitech MX Master 3
Keyboard	Logitech G915, GL Clicky
Software	MacOS 12.1

System Name	My i7 Beast
Processor	Intel Core i7 6800K
Motherboard	Asus X99-A II
Cooling	Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory	4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s)	EVGA 1080 SuperClocked
Storage	Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s)	Three Asus 24" VW246H LCD's
Case	Silverstone TJ07
Audio Device(s)	Onboard
Power Supply	Corsair AX1200
Keyboard	Corsair K95
Software	Windows 10 x64 Pro

System Name	Dean Machine/2020 Ryzenfall
Processor	Intel 4790K/AMD Ryzen 5800X
Motherboard	MSI 1150 Gaming mATX/Asus ROG STRIX B550-F Gaming Wifi
Cooling	Cooler Master Hyper 212 LED/SilverStone AH240 AIO
Memory	16 gigs Crucial Ballistix Tactical Tracer/32 gigs G.Skill TridentZ NEO DDR4
Video Card(s)	Gigabyte 1660 Super/EVGA GTX 1080 FTW Hybrid Gaming
Storage	Crucial SSD 256 and 2TB spinner/Dual Samsung 980 Pro M2 NVME 4.0
Display(s)	Overlord 27" 2560 x 1440
Case	Corsair Air 540
Audio Device(s)	On board
Power Supply	Seasonic modular 850 watt Platinum/EVGA T2-850 Titanium
Software	Windows 10 Pro/Windows 10 Pro

System Name	The work PC /2700x/5950x
Processor	3900X stock/ 2700x stock/ 5950x 4200 MHz fixed @ 1,056-1,08V
Motherboard	Gigabyte AORUS Master X570/2xMSI X470 M7 AC
Cooling	Custom WC XSPC RX480, Laing DDC, XSPC Laing DDC Top V3 and EK Velocity/NH15/NH-U12S SE
Memory	32 GB Viper 3600/14 /16 GB Trident Z F4-4000C18D-16GTZSW 3600 /32 GB G Skill Flare CL14 3400
Video Card(s)	2070 Super X MSI/GTX 970 MSI/ GTX 970 MSI
Storage	1 TB SSD+500 GB NVMe / 500 GB SSD/ 2 TB 990 Pro
Display(s)	Dell UltraSharp U2518D/2408WFP
Case	Corsair 800D / Lian test bench/NZXT 500
Power Supply	AX 850 Titanium/AX 860i/AX 760
Software	Dual boot/Win 10 / Linux / Win 10+Linux

System Name	Slick
Processor	Intel i5 2467M
Motherboard	Samsung Series 5 Ultrabook
Memory	8GB Corsair Value
Storage	Crucial M4 7mm 256GB
Display(s)	13"
Software	Windows 8 Pro x64

System Name	Agent Texas / Selene / Eve
Processor	Ryzen7 5800x / Fx 8350 / Fx 8350
Motherboard	Gigabyte B550 Aorus Elite Ax V2 / Gigabyte 990FXA-UD3 r4.0 / Msi 970a Krait
Cooling	Msi Mag Core liquid / H100i / Cryo-pc Cooler
Memory	2 x32 GB Gskil Ripjaws v series / 4x 8gb G.Skill Snipers / 2x 8gb G.Skill Ripjaws
Video Card(s)	Gigabyte Rx 6800xt / Msi RX580 / Gigabyte R9 290x
Storage	1tb M.2, 2tb wd / 500 gb ssd, 2x 2tb Wd Blacks/ 500 gb ssd, 1tb WD Black
Display(s)	Dell Ultra Sharp 2408 WFp / Hp w2207 / Sanyo tv
Case	Corsair 780t White / Raidmax Vampire / NZXT Phantom 240
Audio Device(s)	Onboard Hd Audio / Onboard Hd Audio / Onboard Hd Audio
Power Supply	Corsair Rm 850 watt / Corsair TX 850 watt / Corsair TX 750 watt
Mouse	Logitech G502 Hero / Logitech G500s / Logitech wireless
Keyboard	Corsair Strafe / Corsair k50 / Logitech wireless
Software	Win 11 pro / Win 11 pro / Win 11 pro
Benchmark Scores	What are benchmarks anyway?

System Name	Waterfall \| xe
Processor	Core i3-12100F \| i5-1240P
Motherboard	Gigabyte B660M-DS3H \| HP laptop
Cooling	Custom Watercooling \| Stock laptop
Memory	2*16GB \| 16GB DDR4
Video Card(s)	RX 5700 with WC blocks \| Iris Xe
Storage	Intel 660 1TB + Crucial BX100 500GB \| 1TB SSD
Display(s)	U24E850R+U2515H \| Internal 16"
Case	Be Quiet! Dark Base 900 \| Laptop
Audio Device(s)	Audio 2 DJ + Xenyx Q802USB \| Realtek
Power Supply	Seasonic Focus Plus Gold 750W \| 65W USB-C Power brick
Mouse	Logitech M330
Keyboard	Logitech G610 Orion Brown \| Laptop
Software	Gentoo + Windows 10 Pro \| Gentoo

Processor	3900X @ 4.0
Motherboard	Asus ROG Strix X570-E
Cooling	DeepCool Castle 360EX
Memory	G Skill Trident Z Neo 32GB 3600
Video Card(s)	RX 5700 XT Pulse
Storage	Sabrent Rocket Q 1TB
Display(s)	LG 34UC88
Case	Thermaltake P3
Power Supply	Super Flower Leadex III 750w
Mouse	Logitech G900
Keyboard	G Skill KM570 MX Silver
Software	Windows 10 Pro

System Name	Starlifter :: Dragonfly
Processor	i7 2600k 4.4GHz :: i5 10400
Motherboard	ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling	Cryorig M9 :: Stock
Memory	4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s)	PNY GTX1070 :: Integrated UHD 630
Storage	Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s)	Onn 165hz 1080p :: Acer 1080p
Case	Antec SOHO 1030B :: Old White Full Tower
Audio Device(s)	Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply	FSP Hydro GE 550w :: EVGA Supernova 550
Software	Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores	>9000

Guide to running multiple GPU work units

Moderator - Returning from the Darkness

Former Staff

WCG Team Assistant

Resident Wat-man

Former Staff

Dedicated TPU Cruncher & Folder

Dedicated TPU Cruncher & Folder

Attachments

Dedicated TPU Cruncher & Folder

Moderator - Returning from the Darkness

Moderator - Returning from the Darkness

Dedicated TPU Cruncher & Folder

Dedicated TPU Cruncher & Folder

WCG-TPU Team All-Star!

Moderator - Returning from the Darkness

WCG-TPU Team All-Star!

Enthusiast

Enthusiast