HyperSLI (Enabling SLI on non-sli motherboards)

d1nky · Jan 28, 2013

thank f**** for that the last ones well ooooomgggg!!

gerard2500 · Jan 28, 2013

Not work with any 310 driver

Hello,
I update to hypersli 0.96 but can't start sli with any of 310 driver i obtain a bsod on my P5q-E.

i return to 306.23 and no problem.

When i install hypersli 0.96 i have to stop my bitdefender.
with bitdefender stopped i can install it but there is always bsod after sli activated.

hartsickdisciple · Jan 28, 2013

I'm having some major issues with Hyper SLI 0.96 and Nvidia 310.90 drivers. I had the same issue with 306.9something (former version) as well. When I reboot my computer and try to boot into HyperSLI mode, I get a BSOD and my computer restarts. Here are my specs-

3570k @ 4.5ghz
Gigabyte Z77-D3H motherboard
2x BFG 9600GT's in SLI (I have a 560 Ti as my main GPU, I have the 9600's to test SLI on my board)
8GB Corsair DDR3-1600
Samsung 830 series 128GB SSD boot drive
WD Caviar Black 1TB storage drive
Windows Vista 64-bit SP2

Any ideas?

Update- HyperSLI works for me when I turn off virtualization in my BIOS. I get BSOD and system reset with virtualization turned on. Crysis Warhead isn't working (massive graphics corruption), but I was able to play Crysis 2.

Mykee36 · Jan 29, 2013

Just downloaded and installed the 313.95 beta drivers. (for the Crysis 3 beta)
Ran a couple of games and benchmarks, no problems at bootup or with gameplay.
I have HyperSLI 9.6 installed.
Run HyperSli in hardware mode

i7 2600k
Windows 7
Motherboard: ASROCK P67 Pro3 SE
GTX 560ti SLI

anatolymik · Jan 29, 2013

gerard2500 said:
i obtain a bsod on my P5q-E

what BSOD do you get?

anatolymik · Jan 29, 2013

hartsickdisciple said:
HyperSLI works for me when I turn off virtualization in my BIOS. I get BSOD and system reset with virtualization turned on. Crysis Warhead isn't working (massive graphics corruption), but I was able to play Crysis 2.

what BSOD. please take a shot.

gerard2500 · Jan 29, 2013

Bsod 310.90

hello anatolymik,

My system spec are :
Asus P5q-E P45 chipset
Core2Quad Q6600 @ 3.2Ghz
2 GTX 260-216 in sli with sli bridge (all ok until 306.23 included)
8 Go Ram
SSD and HDD
Windows 7 SP1 64bit
This is the bsod after new install of 310.90 drivers after 306.23 with hypersli 0.9 same result with 0.96. I install all includes 3d vision.
I noticed that this morning after this bsod when i reboot on non sli windows 7 i have a bsod too, until i reinstall 306.23.

Thks for your job and your reply anatolymik !!!

anatolymik · Jan 29, 2013

gerard2500 said:
hello anatolymik,

My system spec are :
Asus P5q-E P45 chipset
Core2Quad Q6600 @ 3.2Ghz
2 GTX 260-216 in sli with sli bridge (all ok until 306.23 included)
8 Go Ram
SSD and HDD
Windows 7 SP1 64bit
This is the bsod after new install of 310.90 drivers after 306.23 with hypersli 0.9 same result with 0.96. I install all includes 3d vision.
I noticed that this morning after this bsod when i reboot on non sli windows 7 i have a bsod too, until i reinstall 306.23.

Thks for your job and your reply anatolymik !!!

what did you try to solve the problem? did you try 306.97 and 310.33 drivers? what did you see?

Manijak · Jan 29, 2013

Here is my current status with HyperSLI 0.96

HyperSLi: 0.96
OS: Windows 8
Nvidia driver: 310.90
2x GeForce GTX 460

Works fine on most games. But I have noticed one thing: When booting for the first time, the PC hangs at the Windows 8 logo, right before you have to choose boot type (hypersli or normal). After restart, it boots properly. Then I get a dialog to send report to microsoft.

I also had to disable sleep mode in windows, the pc never woke up from it, had to restart.

gerard2500 · Jan 29, 2013

try with differents drivers

To anatolymik.

This evening i try this.
I install hyper sli 0.96 on 306.23
try sli, works fine
sli off in nvidia control panel then install 306.97 in new install without 3d vision
Sli on, works fine
sli off then install 310.33 in new install without 3dvision
Sli on, works fine
sli off then install 310.90 in new install without 3dvision
Sli on, works fine.

It seem's to be 3dvision on my config.

I have to confirm however that i have to disconnect bitdefender to install hyper sli 0.96

DiogoCDS19 · Jan 29, 2013

Manijak said:
Here is my current status with HyperSLI 0.96

HyperSLi: 0.96
OS: Windows 8
Nvidia driver: 310.90
2x GeForce GTX 460

Works fine on most games. But I have noticed one thing: When booting for the first time, the PC hangs at the Windows 8 logo, right before you have to choose boot type (hypersli or normal). After restart, it boots properly. Then I get a dialog to send report to microsoft.

I also had to disable sleep mode in windows, the pc never woke up from it, had to restart.

That happened to myself before as well.
Go to page 58 of this thread and check RiC@RDOC post, thats the fix for that issue.

dccorona · Jan 30, 2013

PC Shutdown issue

I have hyperSLI running on windows 8 (0.96 version), and everything works perfectly fine...except for when the computer goes to sleep. It is very frequent but not 100% persistent, but if the computer has been asleep for long enough (usually after a half hour to an hour), it just shuts down.

Anyone else seeing this issue? I've tried to find it in this thread to no avail

hartsickdisciple · Jan 30, 2013

anatolymik said:
what BSOD. please take a shot.

The BSOD is only onscreen for a split second and then the computer restarts. I don't know how I can take a shot of it.

anatolymik · Jan 30, 2013

gerard2500 said:
To anatolymik.

This evening i try this.
I install hyper sli 0.96 on 306.23
try sli, works fine
sli off in nvidia control panel then install 306.97 in new install without 3d vision
Sli on, works fine
sli off then install 310.33 in new install without 3dvision
Sli on, works fine
sli off then install 310.90 in new install without 3dvision
Sli on, works fine.

It seem's to be 3dvision on my config.

I have to confirm however that i have to disconnect bitdefender to install hyper sli 0.96

some antiviruses (avast for example) specially break the system when detect HyperSLI presence

anatolymik · Jan 30, 2013

hartsickdisciple said:
The BSOD is only onscreen for a split second and then the computer restarts. I don't know how I can take a shot of it.

you have to choose "disable automatic restart on system failure" by pressing F8 key on HyperSLI boot option

gerard2500 · Jan 30, 2013

bitdefender

anatolymik
i have to say that after hypersli 0.96 was installed. i could set bitdefender without problem it s just for install.
now my system seem stable if i don t install 3dvision no more bsod.
my set of gtx 260-216 was made of one 65nm and one 55 nm perhaps the problem.
i try farcry 3 and i have 98% use off each gpu and double my frame rate over 306.23i
thanks for your good work.

SaZ · Jan 30, 2013

Nvidia 313.96 Beta is out

Im running 313.96 Beta and HyperSli 0.96 everything seems fine :rockout:

Sukram · Jan 30, 2013

anatolymik said:
some antiviruses (avast for example) specially break the system when detect HyperSLI presence

My opinion:
... Avast Free: actual 0 (in words: sero!) problems

... Avira Free: sometimes the CP was gone in the wide open digital universe, after restart sometimes was back again :-0

=> Are you sure with Avast?

BTW: Any news with virtual machines and HyperSLI?

Greetinx,

Sukram.

red_stapler · Jan 31, 2013

Gigabyte GA-MA790FXT-UD5P & GeForce 550Ti pair, using .96, 310.xx, and Windows 8 Pro x64 - working no problems!

anatolymik · Jan 31, 2013

Sukram said:
My opinion:
... Avast Free: actual 0 (in words: sero!) problems
... Avira Free: sometimes the CP was gone in the wide open digital universe, after restart sometimes was back again :-0

=> Are you sure with Avast?

BTW: Any news with virtual machines and HyperSLI?

Greetinx,

Sukram.

there was some version of avast which down the system when it detects HyperSLI. About virtual machines, i'm starting to work on this.

gerard2500 · Jan 31, 2013

bsod on 310.90

hello, anatolymik, today when i start my computer i have the same bsod with 310.90

I thinks there is perhaps a problem with bitdefender or my config with hypersli 0.96.

anatolymik · Jan 31, 2013

You boots ok if you have bitdefender off?

gerard2500 · Jan 31, 2013

bsod on 310.90

anatolymik , i try this
i disable antivirus of bitdefender total security 2012
i install 310.90 with new install without 3dvision
all ok. I activate SLI. all ok. I reboot first time no problem.
I reboot a second time, the same bsod
I restart in no hypersli windows, desactivate firewall of bidefender, reboot and bsod again
another reboot bsod again.
I install 306.97 run fine no bsod.
I will try to install new bitdefender 2013 to see if i have the same problem.

gerard2500 · Jan 31, 2013

bsod in 310.90

i install bitdefender 2013 same thing always bsod with 310.90 after reboot

i install the 313.96 drivers but i obtain the same bsod but during install and after reboot nvidia drivers are not installed.

here i turn on 306.97 no problem but no good sli in farcry 3

anatolymik · Jan 31, 2013

what HyperSLI mode you use?

System Name	Zotan
Processor	i9-10850K
Motherboard	Gigabyte Z490 Gaming X AX
Cooling	H100
Memory	32GB Viper 3200
Video Card(s)	Zotac RTX3080
Case	Airflow 275R
Power Supply	RMX850
Benchmark Scores	d1nky@hwbot.org

Processor	Intel i7 7700k @4.5Ghz
Motherboard	Asus Strix Z270E Gaming
Cooling	Cooler Master Nepton 120XL
Memory	Corsair Vengeance LED Red 2x8GB 3000Mhz
Video Card(s)	Asus Strix GTX980TI
Storage	Samsung SSD 840 EVO 250GB
Display(s)	BenQ XL2411Z / Dell SE198WFP
Case	NOX Hummer TG RGB
Power Supply	Corsair RM850
Mouse	Razer Mamba Chroma
Keyboard	Razer Blackwidow Chroma
Software	Windows 10 - 64bit

System Name	SGC K2 -K1
Processor	Intel 4790K -Intel Q9650
Motherboard	Asus Z97-WS- Asus P5E64WS EVO X48
Cooling	SGC Prototype-EK 240 HF+ 2x GTX295 single pcb Aquacomputer
Memory	Mushkin Redline- Corsair dominator 8GB 1600MHZ
Video Card(s)	Asus GTX980 DC2OC -2x Asus ENGTX295 QuadSli with DifferentSLiAuto v1.1
Storage	Corsair Force GS240GB(Games+Programs)+Seagate 2TB(Storage)-OCZ Vertex 3 60GB(OS)
Display(s)	2X Samsung Syncamster P2250+Acer V243H - Acer X193w
Case	Corsair 900D-Buffetti...a 13 years old case
Audio Device(s)	Integrated sound card is enough for both
Power Supply	Corsair TX750M-Coolermaster 650W
Mouse	Logitech G400
Keyboard	Logitech G110
Software	Win 7 Ultimate X64
Benchmark Scores	K1 score Unigine Heaven dx10 2731 pts 3DMark Vantage (CPU@4GHZ-RAM@7-8-8-24) 23417 pts

System Name	red_stapler
Processor	Core i5-2500K 4.4GHz
Motherboard	BIOSTAR TZ77XE3
Cooling	Deepcool Gamerstorm, SP120HP chassis fans x5, NZXT Grid+
Memory	Kingston HyperX 16GB DDR3 2133
Video Card(s)	Powercolor 7950 PCS+ OC 1060/1500
Storage	Crucial MX100 128GB / Seagate 1TB/8GB Hybrid / WD Green 2TB
Display(s)	n/a
Case	NZXT Source 210
Audio Device(s)	Realtek ALC892
Power Supply	Rosewill Quark 650 Platinum
Mouse	Logitech G400
Keyboard	CM Storm Quickfire Rapid
Software	Windows 10 Pro x64, Steam, Etc.

HyperSLI (Enabling SLI on non-sli motherboards)

d1nky

gerard2500

New Member

hartsickdisciple

New Member

Mykee36

New Member

anatolymik

anatolymik

gerard2500

New Member

Attachments

anatolymik

Manijak

New Member

gerard2500

New Member

DiogoCDS19

dccorona

New Member

hartsickdisciple

New Member

anatolymik

anatolymik

gerard2500

New Member

SaZ

Sukram

red_stapler

anatolymik

gerard2500

New Member

Attachments

anatolymik

gerard2500

New Member

gerard2500

New Member

anatolymik