World Community Grid February Team Challenge

n3rdf1ght3r · Feb 10, 2013

Got a lot of red pocket money today due to Chinese new year =D hopping to get a 7770 to get some more points, or a camera, or a new lens... hmmm decisions :/

AlienIsGOD · Feb 10, 2013

n3rdf1ght3r said:
hopping to get a 7770 to get some more points, or a camera, or a new lens... hmmm decisions :/

go for a 7850/70, MOAR POWAH !!

SirKeldon · Feb 10, 2013

Bow said:
I have 1 WU per card on my 6950's for now, going to try and bump it up to 2 later today.

dude12564 said:
I think n3rdf1ght3r's running 4 WUs on his 6950.

Just for the record, ATM i'm running my 6850 (clocked at 900/1200) with 4 WU's at once, taking 23 minutes approx to complete a WU. Don't know if i'm asking too much out of it, but it's doing a pretty good job.

:toast:

BUCK NASTY · Feb 11, 2013

SirKeldon said:
Just for the record, ATM i'm running my 6850 (clocked at 900/1200) with 4 WU's at once, taking 23 minutes approx to complete a WU. Don't know if i'm asking too much out of it, but it's doing a pretty good job.

No error's? My 6850 is at 97% load with 2 WU's. Takes about 11 mins each, so our production is about the same. Not a big AMD fan, but how do I break the 850mhz barrier with this card(Overdrive & Afterburner stop @ 850Mhz)?

TRWOV · Feb 11, 2013

can't get more than 1 WU working on my 6950, keeps spitting errors if I try to run 2 or more. I see everyone is having success so I guess it's a W8 thing.

Just in case someone can help me these are the details:
HD6950 2GB stock
Core i5-2320 3.0Ghz turbo to 3.5Ghz
Boinc 7.0.44 beta <- W8 can only run 7.0.31beta or higher, there's no stable version compatible with W8
cat 13.2b5

SirKeldon · Feb 11, 2013

BUCK NASTY said:
No error's? My 6850 is at 97% load with 2 WU's. Takes about 11 mins each, so our production is about the same. Not a big AMD fan, but how do I break the 850mhz barrier with this card(Overdrive stops @ 850Mhz)?

I was just having "calculation errors" some weeks ago and thought it was my OC, though the games and all the other apps were running ok (OCCT GPU was not showing any error after 15 min test), retested it all and even @ stock settings i was still having BOINC "calculation errors" randomly within the GPU, but as far as i read in some forums, it was the drivers, i updated them to the 13.1 version and i didn't had any issue since then even reapplying the OC.

The other thing, my AMD Overdrive is not stopping at 850, i can hit 1000 MHz on core and 1250 on memory, came OC'd from factory at 790/1000, has some "voltage tweak" included (it's advertised in the box) ... maybe because of that? I can reboot to Windows and make a screenshot if you want. 935/1235 was the max stable i reached with 1,157V (GPU-Z tells that as i'm not manually tweaking the voltage)

Btw, running Windows 7 Ultimate x64 + BOINC 7.0.44 when GPU crunching

:toast:

BUCK NASTY · Feb 11, 2013

SirKeldon said:
I was just having "calculation errors" some weeks ago and thought it was my OC, though the games and all the other apps were running ok (OCCT GPU was not showing any error after 15 min test), retested it all and even @ stock settings i was still having BOINC "calculation errors" randomly within the GPU, but as far as i read in some forums, it was the drivers, i updtated them to the 13.1 version and i didn't had any issue since then even reapplying the OC.

The other thing, my AMD Overdrive is not stopping at 850, i can hit 1000 MHz on core and 1250 on memory, came OC'd from factory at 790/1000, has some "voltage tweak" included (it's advertised in the box) ... maybe because of that? I can reboot to Windows and make a screenshot if you want. 935/1235 was the max stable i reached with 1,157V (GPU-Z tells that as i'm not manually tweaking the voltage)

Btw, running Windows 7 Ultimate x64 + BOINC 7.0.44 when GPU crunching

I found the Afterburner Config file adjustment online, so my Afterburner clocks are wide open now. Thanks!

Got her running 950/1200/1.2V @ 49C. Card runs super cool.

:toast:

Bow · Feb 11, 2013

adulaamin · Feb 11, 2013

Good day! BOINC only runs 1 WU through the GPU since I set it up.

This is my app_config.xml file. I used the utility to create one.

<app_config>
<app>
<name>hcc1</name>
<max_concurrent>4</max_concurrent>
<gpu_versions>
<gpu_usage>0.250</gpu_usage>
<cpu_usage>1.000</cpu_usage>
</gpu_versions>
</app>
</app_config>

How do I get it to run at least 4 WU through the GPU? The max GPU load I get running 1 WU is 27% so I'd like to utilize more of the GPU

SirKeldon · Feb 11, 2013

adulaamin said:
Good day! BOINC only runs 1 WU through the GPU since I set it up.

http://img.techpowerup.org/130210/WCG2.jpg

This is my app_config.xml file. I used the utility to create one.

<app_config>
<app>
<name>hcc1</name>
<max_concurrent>4</max_concurrent>
<gpu_versions>
<gpu_usage>0.250</gpu_usage>
<cpu_usage>1.000</cpu_usage>
</gpu_versions>
</app>
</app_config>

How do I get it to run at least 4 WU through the GPU? The max GPU load I get running 1 WU is 27% so I'd like to utilize more of the GPU

From your image i can see that you're running BOINC Manager 6.10 which i think it was still not compatible with multi-gpu work, if you update to 7.0.40 or above (7.0.44 is available) keeping that config file i think you should be fine and using the 100% of your GPU.

adulaamin · Feb 11, 2013

SirKeldon said:
From your image i can see that you're running BOINC Manager 6.10 which i think it was still not compatible with multi-gpu work, if you update to 7.0.40 or above (7.0.44 is available) keeping that config file i think you should be fine and using the 100% of your GPU.

where do I download the 7.0.40 version? I downloaded the Manager I'm using now from the WCG website 3 days ago.

NVM... FOUND IT!

TRWOV · Feb 11, 2013

Octanux is gearing up for some crunching.

Farm pic:

catnipkiller · Feb 11, 2013

Rig#2 is now back up and running after all the work load ran out and i had to reset it. I had all 3 rigs going then my fuse blew so i'm sticking with 2 rigs for now lol.

xvi · Feb 11, 2013

Having an issue on an i7 860 + HD 5770 machine. CPU WUs start up no problem, but all the GPU WUs instantly fail saying "Computation error". I'd made no changes to any of the settings beyond what I set as my default profile.

Help pls?

Win 7 64-bit
HP Pavilion Elite HPE

Log after the spoiler.

Code:

10/02/2013 7:02:58 PM |  | No config file found - using defaults
10/02/2013 7:02:58 PM |  | Starting BOINC client version 7.0.28 for windows_x86_64
10/02/2013 7:02:58 PM |  | log flags: file_xfer, sched_ops, task
10/02/2013 7:02:58 PM |  | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6
10/02/2013 7:02:58 PM |  | Data directory: C:\ProgramData\BOINC
10/02/2013 7:02:58 PM |  | Running under account Bri
10/02/2013 7:02:58 PM |  | Processor: 8 GenuineIntel Intel(R) Core(TM) i7 CPU         860  @ 2.80GHz [Family 6 Model 30 Stepping 5]
10/02/2013 7:02:58 PM |  | Processor: 256.00 KB cache
10/02/2013 7:02:58 PM |  | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 nx lm vmx smx tm2 popcnt pbe
10/02/2013 7:02:58 PM |  | OS: Microsoft Windows 7: Home Premium x64 Edition, Service Pack 1, (06.01.7601.00)
10/02/2013 7:02:58 PM |  | Memory: 7.96 GB physical, 15.92 GB virtual
10/02/2013 7:02:58 PM |  | Disk: 920.02 GB total, 738.27 GB free
10/02/2013 7:02:58 PM |  | Local time is UTC -8 hours
10/02/2013 7:02:58 PM |  | ATI GPU 0: ATI Radeon HD 5700 series (Juniper) (CAL version 1.4.1385, 1024MB, 991MB available, 2720 GFLOPS peak)
10/02/2013 7:02:58 PM | World Community Grid | URL http://www.worldcommunitygrid.org/; Computer ID 2292793; resource share 100
10/02/2013 7:02:58 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 7:02:58 PM | World Community Grid | Host location: none
10/02/2013 7:02:58 PM | World Community Grid | General prefs: using your defaults
10/02/2013 7:02:58 PM |  | Reading preferences override file
10/02/2013 7:02:58 PM |  | Preferences:
10/02/2013 7:02:58 PM |  | max memory usage when active: 6113.33MB
10/02/2013 7:02:58 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 7:02:58 PM |  | max disk usage: 10.00GB
10/02/2013 7:02:58 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 7:02:58 PM |  | Not using a proxy
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0508_1 using dsfl version 625 in slot 0
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0070_1 using dsfl version 625 in slot 1
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000022_0833_1 using dsfl version 625 in slot 2
10/02/2013 7:03:13 PM | World Community Grid | Restarting task SN2S_CAA67208_0000096_0903_1 using sn2s version 620 in slot 3
10/02/2013 7:03:13 PM | World Community Grid | Restarting task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 using cep2 version 640 in slot 4
10/02/2013 7:03:13 PM | World Community Grid | Restarting task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0777_1 using dsfl version 625 in slot 6
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7
10/02/2013 7:03:38 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 suspended by user
10/02/2013 7:03:47 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0508_1 using dsfl version 625 in slot 0
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0070_1 using dsfl version 625 in slot 1
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000022_0833_1 using dsfl version 625 in slot 2
10/02/2013 7:03:48 PM | World Community Grid | Resuming task SN2S_CAA67208_0000096_0903_1 using sn2s version 620 in slot 3
10/02/2013 7:03:48 PM | World Community Grid | Resuming task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 using cep2 version 640 in slot 4
10/02/2013 7:03:48 PM | World Community Grid | Resuming task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0777_1 using dsfl version 625 in slot 6
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7
10/02/2013 7:04:43 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:04:43 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:04:46 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:04:46 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:06:41 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:06:41 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:06:43 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:06:43 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:10:18 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:10:18 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:10:20 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:10:20 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:17:45 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:17:45 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:17:48 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:17:48 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:24:12 PM |  | Windows is suspending operations
10/02/2013 7:24:13 PM |  | Suspending computation - requested by operating system
10/02/2013 7:24:13 PM |  | Suspending network activity - requested by operating system
10/02/2013 7:24:23 PM |  | Resuming after OS suspension
10/02/2013 9:17:09 PM |  | Resuming computation
10/02/2013 9:17:09 PM |  | Resuming network activity
10/02/2013 9:17:09 PM |  | Windows is resuming operations
10/02/2013 9:17:09 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 9:17:09 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 9:17:20 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 9:17:20 PM | World Community Grid | Server error: feeder not running
10/02/2013 9:25:55 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 9:25:55 PM | World Community Grid | Host location: none
10/02/2013 9:25:55 PM | World Community Grid | General prefs: using your defaults
10/02/2013 9:25:55 PM |  | Reading preferences override file
10/02/2013 9:25:55 PM |  | Preferences:
10/02/2013 9:25:55 PM |  | max memory usage when active: 6113.33MB
10/02/2013 9:25:55 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 9:25:55 PM |  | max disk usage: 10.00GB
10/02/2013 9:25:55 PM |  | Number of usable CPUs has changed from 8 to 6.
10/02/2013 9:25:55 PM |  | max CPUs used: 6
10/02/2013 9:25:55 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 9:30:25 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 9:30:25 PM | World Community Grid | Host location: none
10/02/2013 9:30:25 PM | World Community Grid | General prefs: using your defaults
10/02/2013 9:30:25 PM |  | Reading preferences override file
10/02/2013 9:30:25 PM |  | Preferences:
10/02/2013 9:30:25 PM |  | max memory usage when active: 6113.33MB
10/02/2013 9:30:25 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 9:30:25 PM |  | max disk usage: 10.00GB
10/02/2013 9:30:25 PM |  | Number of usable CPUs has changed from 6 to 8.
10/02/2013 9:30:25 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 9:30:26 PM | World Community Grid | Resuming task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 9:30:26 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7

I did see the "Down for maintenance message" entry, but why do I have a big list of WUs that all failed?
Also, in the screenshot, I have yet to apply the "100% of CPU cores" setting, so only 6 threads are active. Eight are active now.

Edit: Derp. Trying new drivers.

Second edit: Latest drivers, getting this:

Code:

10/02/2013 10:01:20 PM | World Community Grid | Sending scheduler request: Requested by user.
10/02/2013 10:01:20 PM | World Community Grid | Requesting new tasks for CPU and ATI
10/02/2013 10:01:22 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 10:01:22 PM | World Community Grid | Server error: feeder not running

Norton · Feb 11, 2013

xvi said:

Having an issue on an i7 860 + HD 5770 machine. CPU WUs start up no problem, but all the GPU WUs instantly fail saying "Computation error". I'd made no changes to any of the settings beyond what I set as my default profile.

Help pls?

Win 7 64-bit
HP Pavilion Elite HPE

Log after the spoiler.

Code:

10/02/2013 7:02:58 PM |  | No config file found - using defaults
10/02/2013 7:02:58 PM |  | Starting BOINC client version 7.0.28 for windows_x86_64
10/02/2013 7:02:58 PM |  | log flags: file_xfer, sched_ops, task
10/02/2013 7:02:58 PM |  | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6
10/02/2013 7:02:58 PM |  | Data directory: C:\ProgramData\BOINC
10/02/2013 7:02:58 PM |  | Running under account Bri
10/02/2013 7:02:58 PM |  | Processor: 8 GenuineIntel Intel(R) Core(TM) i7 CPU         860  @ 2.80GHz [Family 6 Model 30 Stepping 5]
10/02/2013 7:02:58 PM |  | Processor: 256.00 KB cache
10/02/2013 7:02:58 PM |  | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 nx lm vmx smx tm2 popcnt pbe
10/02/2013 7:02:58 PM |  | OS: Microsoft Windows 7: Home Premium x64 Edition, Service Pack 1, (06.01.7601.00)
10/02/2013 7:02:58 PM |  | Memory: 7.96 GB physical, 15.92 GB virtual
10/02/2013 7:02:58 PM |  | Disk: 920.02 GB total, 738.27 GB free
10/02/2013 7:02:58 PM |  | Local time is UTC -8 hours
10/02/2013 7:02:58 PM |  | ATI GPU 0: ATI Radeon HD 5700 series (Juniper) (CAL version 1.4.1385, 1024MB, 991MB available, 2720 GFLOPS peak)
10/02/2013 7:02:58 PM | World Community Grid | URL http://www.worldcommunitygrid.org/; Computer ID 2292793; resource share 100
10/02/2013 7:02:58 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 7:02:58 PM | World Community Grid | Host location: none
10/02/2013 7:02:58 PM | World Community Grid | General prefs: using your defaults
10/02/2013 7:02:58 PM |  | Reading preferences override file
10/02/2013 7:02:58 PM |  | Preferences:
10/02/2013 7:02:58 PM |  | max memory usage when active: 6113.33MB
10/02/2013 7:02:58 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 7:02:58 PM |  | max disk usage: 10.00GB
10/02/2013 7:02:58 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 7:02:58 PM |  | Not using a proxy
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0508_1 using dsfl version 625 in slot 0
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0070_1 using dsfl version 625 in slot 1
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000022_0833_1 using dsfl version 625 in slot 2
10/02/2013 7:03:13 PM | World Community Grid | Restarting task SN2S_CAA67208_0000096_0903_1 using sn2s version 620 in slot 3
10/02/2013 7:03:13 PM | World Community Grid | Restarting task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 using cep2 version 640 in slot 4
10/02/2013 7:03:13 PM | World Community Grid | Restarting task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0777_1 using dsfl version 625 in slot 6
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7
10/02/2013 7:03:38 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 suspended by user
10/02/2013 7:03:47 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0508_1 using dsfl version 625 in slot 0
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0070_1 using dsfl version 625 in slot 1
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000022_0833_1 using dsfl version 625 in slot 2
10/02/2013 7:03:48 PM | World Community Grid | Resuming task SN2S_CAA67208_0000096_0903_1 using sn2s version 620 in slot 3
10/02/2013 7:03:48 PM | World Community Grid | Resuming task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 using cep2 version 640 in slot 4
10/02/2013 7:03:48 PM | World Community Grid | Resuming task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0777_1 using dsfl version 625 in slot 6
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7
10/02/2013 7:04:43 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:04:43 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:04:46 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:04:46 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:06:41 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:06:41 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:06:43 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:06:43 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:10:18 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:10:18 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:10:20 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:10:20 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:17:45 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:17:45 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:17:48 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:17:48 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:24:12 PM |  | Windows is suspending operations
10/02/2013 7:24:13 PM |  | Suspending computation - requested by operating system
10/02/2013 7:24:13 PM |  | Suspending network activity - requested by operating system
10/02/2013 7:24:23 PM |  | Resuming after OS suspension
10/02/2013 9:17:09 PM |  | Resuming computation
10/02/2013 9:17:09 PM |  | Resuming network activity
10/02/2013 9:17:09 PM |  | Windows is resuming operations
10/02/2013 9:17:09 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 9:17:09 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 9:17:20 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 9:17:20 PM | World Community Grid | Server error: feeder not running
10/02/2013 9:25:55 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 9:25:55 PM | World Community Grid | Host location: none
10/02/2013 9:25:55 PM | World Community Grid | General prefs: using your defaults
10/02/2013 9:25:55 PM |  | Reading preferences override file
10/02/2013 9:25:55 PM |  | Preferences:
10/02/2013 9:25:55 PM |  | max memory usage when active: 6113.33MB
10/02/2013 9:25:55 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 9:25:55 PM |  | max disk usage: 10.00GB
10/02/2013 9:25:55 PM |  | Number of usable CPUs has changed from 8 to 6.
10/02/2013 9:25:55 PM |  | max CPUs used: 6
10/02/2013 9:25:55 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 9:30:25 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 9:30:25 PM | World Community Grid | Host location: none
10/02/2013 9:30:25 PM | World Community Grid | General prefs: using your defaults
10/02/2013 9:30:25 PM |  | Reading preferences override file
10/02/2013 9:30:25 PM |  | Preferences:
10/02/2013 9:30:25 PM |  | max memory usage when active: 6113.33MB
10/02/2013 9:30:25 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 9:30:25 PM |  | max disk usage: 10.00GB
10/02/2013 9:30:25 PM |  | Number of usable CPUs has changed from 6 to 8.
10/02/2013 9:30:25 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 9:30:26 PM | World Community Grid | Resuming task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 9:30:26 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7

I did see the "Down for maintenance message" entry, but why do I have a big list of WUs that all failed?
Also, in the screenshot, I have yet to apply the "100% of CPU cores" setting, so only 6 threads are active. Eight are active now.

Edit: Derp. Trying new drivers.

Make sure the OpenCl driver is selected with the driver package installation- confirm installation with GPUZ

Check this and post back

xvi · Feb 11, 2013

Norton said:
Make sure the OpenCl driver is selected with the driver package installation- confirm installation with GPUZ

Check this and post back

Wait.. Apparently there's a scheduled outage?

I did the "Custom" install and made sure any sort of accelerated computing options were checked. Checked in GPU-z and OpenCL is checked. I tried resetting the project, so now I have no WUs.

Norton · Feb 11, 2013

xvi said:
Wait.. Apparently there's a scheduled outage?

I did the "Custom" install and made sure any sort of accelerated computing options were checked. Checked in GPU-z and OpenCL is checked. I tried resetting the project, so now I have no WUs.

The outage should be done in about 2 or 3 hours (maybe sooner) so you will need to wait a bit to see if the problem is still there.

What driver are you using? Note- I use 12.6, they are very stable for me but YMMV

xvi · Feb 11, 2013

Norton said:
The outage should be done in about 2 or 3 hours (maybe sooner) so you will need to wait a bit to see if the problem is still there.

What driver are you using? Note- I use 12.6, they are very stable for me but YMMV

13.1. We'll see. I won't have direct physical access to this computer for a while after tonight, but I can give orders through the phone. At worst, 8 threads a crunchin' is nothing to scoff at.

This machine was originally using the drivers pre-installed from HP. Thinking about it now, I'm not surprised it failed.

EDIT: CRUNCHING ON GPU! Drivers were it.

HammerON · Feb 11, 2013

Both rigs have updated

Looks like the outage is over :toast:

mauriek · Feb 11, 2013

Finally finished with the cruncher rig assembly and installation, just sit back and watch, i wonder how much FX8320 + GTX670 (4WU GPU) and Phenom II X4 + 7870 (2WU GPU) will give me point.

I'm going to buy new 550w PSU tomorrow for the 7870 and try 4 WU, because i plan to keep it crunching for a long time after the contest over.

Norton · Feb 11, 2013

mauriek said:
Finally finished with the cruncher rig assembly and installation, just sit back and watch, i wonder how much FX8320 + GTX670 (4WU GPU) and Phenom II X4 + 7870 (2WU GPU) will give me point.

I'm going to buy new 550w PSU tomorrow for the 7870 and try 4 WU, because i plan to keep it crunching for a long time after the contest over.

You should be able to get 8-10 gpu wu's out of a 7870... both of mine are running 10 atm

[Ion] · Feb 11, 2013

Norton said:
You should be able to get 8-10 gpu wu's out of a 7870... both of mine are running 10 atm

Ten?? I do ten with the HD7950 :eek:

Once i get more CPU cores available, I guess I'll try a dozen on the Tahiti cards and eight on the HD7850 :wtf:

Norton · Feb 11, 2013

[Ion] said:
Ten?? I do ten with the HD7950
Once i get more CPU cores available, I guess I'll try a dozen on the Tahiti cards and eight on the HD7850

FX-8 chips are pretty decent work horses for this sort of thing

EDIT-

Quick tip for any new crunchers.....

If you enable "show hosts" in your WCG profile you can monitor the performance of your systems (each rig) through sites like FreeDC or BOINCStats

This setting from the WCG profile (last selection on the page):

It's off by default but most of us turn it on to be able to watch our output with a little better detail.

KrisC · Feb 11, 2013

Wow getting 25k was a breeze.

TRWOV · Feb 11, 2013

Is there a way to restrict what kind of work a device gets? My CPU cruncher is getting several HCC units and they take about 3 hours to complete. I'd rather do CPU-only units there.

EDIT: NVM, I found it. Had to setup a custom profile.

System Name	That computer
Processor	Intel I7 960 OC @ 4GHz
Motherboard	Gigabyte G.1 Guerilla
Cooling	Corsair H80
Memory	12gb G.Skill DDR3 1333MHz
Video Card(s)	Gigabyte Radeon 6950 2GB
Storage	120GB Samsung 840, 2x 1TB WD Black Raid 0
Display(s)	2X ACER S232HL
Case	Thermaltake Amour A90
Audio Device(s)	Asus Xonar DX
Power Supply	600W OCZ MODXSTREAM PRO
Software	Windows 7 Ultimate x64

System Name	Aliens Ryzen Rig \| 2nd Hand Omen
Processor	Ryzen R5 5600 \| Ryzen R5 3600
Motherboard	Gigabyte B450 Aorus Elite (F61 BIOS) \| B450 matx
Cooling	DeepCool Castle EX V2 240mm AIO\| stock for now
Memory	8GB X 2 DDR4 3000mhz Team Group Vulcan \| 16GB DDR4
Video Card(s)	Sapphire Pulse RX 5700 8GB \| GTX 1650 4GB
Storage	Adata XPG 8200 PRO 512GB SSD OS / 240 SSD + 2TB M.2 SSD Games / 1000 GB Data \| SSD + HDD
Display(s)	Acer Nitro x27OU 27" VA 165hz Freesync Premium\|TCL 32" 1080P w/ HDR
Case	NZXT H500 Black \| HP Omen Obelisk
Audio Device(s)	Onboard Realtek \| Onboard Realtek
Power Supply	EVGA SuperNOVA G3 650w 80+ Gold \| 500w
Mouse	Steelseries Rival 500 15 button mouse w/ Razor Goliathus Chroma XL mousemat \| Logitech G502
Keyboard	Corsair K65 Mini w/ Cherry MX brown keys \| Logitech G513 Carbon w/ Romer G tactile keys
Software	Windows 10 Pro \| Windows 10 Pro

System Name	Woody
Processor	AMD Ryzen 7 9700X
Motherboard	Gigabyte B650M Aorus Elite AX ICE
Cooling	MSI MAG A13 CoreLiquid 360
Memory	32GB (2x16) Corsair Vengeance 6000MHz (CL30)
Video Card(s)	Sapphire Pulse RX 7800 XT
Storage	WD_BLACK SN850x (2x1TB) + Sandisk Ultra 2TB
Display(s)	LG 34WN80C (3440x1440 @ 70 Hz)
Case	Lian Li A3 (Black-Wood)
Audio Device(s)	Logitech Pro X & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply	Corsair RM750 (ver. 2019)
Mouse	Logitech MX Master 3
Keyboard	Keychron Q1 Pro (Akko Cream Blue Pro V3 switches)
Software	Windows 10 Pro x64

System Name	Main Rig
Processor	AMD RYZEN 5600X
Motherboard	MSI MPG X570 GAMING EDGE WIFI
Cooling	CORSAIR H115i
Memory	16gb DDR4 @ 1200MHZ
Video Card(s)	GIGABYTE RTX 4080 SUPER
Storage	SAMSUNG M.2 1TB
Display(s)	ASUS 24" IPS
Case	Coolermaster Centurion 590
Audio Device(s)	Onboard
Power Supply	EVGA SUPERNOVA 1000
Software	Windows 10 64

System Name	Dell-y Driver
Processor	Core i5-10400
Motherboard	Asrock H410M-HVS
Cooling	Intel 95w stock cooler
Memory	2x8 A-DATA 2999Mhz DDR4
Video Card(s)	UHD 630
Storage	1TB WD Green M.2 - 4TB Seagate Barracuda
Display(s)	Asus PA248 1920x1200 IPS
Case	Dell Vostro 270S case
Audio Device(s)	Onboard
Power Supply	Dell 220w
Software	Windows 10 64bit

World Community Grid February Team Challenge

n3rdf1ght3r

AlienIsGOD

Vanguard Beta Tester

SirKeldon

BUCK NASTY

4P Enthusiust

TRWOV

SirKeldon

BUCK NASTY

4P Enthusiust

Bow

adulaamin

SirKeldon

adulaamin

TRWOV

catnipkiller

xvi

Attachments

Norton

Moderator - Returning from the Darkness

xvi

Norton

Moderator - Returning from the Darkness

xvi

HammerON

The Watchful Moderator

mauriek

Norton

Moderator - Returning from the Darkness

[Ion]

WCG Team Assistant

Norton

Moderator - Returning from the Darkness

KrisC

TRWOV

System Name	SLOW-MO-SHUN III
Processor	AMD RYZEN 9 7950X 4.5ghz 16 Core
Motherboard	MSI MPG X670E Carbon wifi
Cooling	Quench 360 Liquid Cooler
Memory	2x 16GB Kingston Fury Beast DDR 5-5200
Video Card(s)	NVidia GeForce RTX 3090 24 GB GDDR6X
Storage	1TB Kingston NV2 M.2 SSD 2TB 2.5 SanDisk SSD Plus
Display(s)	Asus 28" VP28UQG 4K 3840x2160
Case	Athena M1, 6 Chassis Fans
Audio Device(s)	Onboard
Power Supply	EVGA Super Nova 1000W
Mouse	Razer Deathadder
Keyboard	Razer Ornata
Software	Windows 11 Home 64-Bit

System Name	hmmm...
Processor	9800X3D
Motherboard	X670E-I
Cooling	PA120SE
Memory	2x16gb 6400 C32
Video Card(s)	EVGA GTX 1080 TI FTW3
Storage	T500 1tb
Display(s)	4K 120hz
Case	Jonsplus Z20
Audio Device(s)	Onboard
Power Supply	SF-1000
Mouse	Logitech
Keyboard	Corsair K70 LUX RGB
Software	Windows 10 Professional x64

System Name	INTEL/AMD
Processor	I7 4790k stock / 1100T@3.8GHZ(on air)
Motherboard	GIGABYTE GAMING 5 / GIGABYTE GA-990FXA-UD3
Cooling	Noctua NH-D15 / zalmen 9900
Memory	4x4 GB 1600 / 4x4gb 1600
Video Card(s)	GTX670 x2 / ATI 5870 x2
Storage	2xcorsair ssd 120gb raid0 /2x adata ssd 120gb
Display(s)	55Iinch LCD / 22inch acer
Case	CM 690 II Advanced (USB 3) / Anteck 900
Power Supply	Enermax 800EWT / 750 zalman
Software	Win 10

System Name	Rainbow
Processor	Intel Core i7 8700k
Motherboard	MSI MPG Z390M GAMING EDGE AC
Cooling	Corsair H115i, 2x Noctua NF-A14 industrialPPC-3000 PWM
Memory	G. Skill TridentZ RGB 4x8GB (F4-3600C16Q-32GTZR)
Video Card(s)	ZOTAC GeForce RTX 3090 Trinity
Storage	2x Samsung 950 Pro 256GB \| 2xHGST Deskstar 4TB 7.2K
Display(s)	Samsung C27HG70
Case	Xigmatek Aquila
Power Supply	Seasonic 760W SS-760XP
Mouse	Razer Deathadder 2013
Keyboard	Corsair Vengeance K95
Software	Windows 10 Pro
Benchmark Scores	4 trillion points in GmailMark, over 144 FPS 2K Facebook Scrolling (Extreme Quality preset)

System Name	Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor	Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard	Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling	Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory	2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s)	MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage	Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s)	Main PC (2x24" Dell UltraSharp U2414H)
Case	Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s)	Logitech Z625 THX 2.1 speakers
Power Supply	EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse	G300s
Keyboard	Corsair K65
VR HMD	N/A
Software	Windows 10 Pro or Ubuntu
Benchmark Scores	Why sit on the Bench when you can get in the game and Crunch!!!

System Name	Aki
Processor	AMD 7800X3D
Motherboard	ASUS ROG STRIX X670E-A
Cooling	MSI MAG CoreLiquid E360
Memory	Patriot Viper Elite 5 32GB 6200
Video Card(s)	PNY RTX 4090 XLR8
Storage	Samsung 960 Pro 512 GB + WD Black SN850 1TB
Display(s)	Dell 32" Curved Gaming Monitor (S3220DGF)
Case	Corsair 5000D Airflow
Audio Device(s)	On-board
Power Supply	EVGA SuperNOVA 1000 G5
Mouse	Roccat Kone Pure
Keyboard	ASUS ROG Strix Scope II Wireless
Software	Win 11 Pro
Benchmark Scores	Always changing~

System Name	Folding System
Processor	Ryzen 5 5500
Motherboard	ASRock B540 Steel Legend
Cooling	EK Clean CSQ WB + EK CoolStream RAD XTX 480 + Swiftech D5 Pump
Memory	4 x 8 GB DDR4 HyperX Fury
Video Card(s)	Zotac RTX 3070 8Gb Twin Edge OC
Storage	Team MP33 NVME 1TB \| 4x Seagate 4TB Raid 0
Display(s)	Titan Army 27G1 IPS 2K 144Hz
Case	Corsair 900D + 1 Aerocool 14cm Fan, 3 CM Fan 12cm, 4 Scythe Slim Fan 12cm, 4 Corsair Fan 12cm
Audio Device(s)	ASUS Xonar Phoebus + Hippo cri head amp + Sennheiser HD 598 + Razer Megalodon
Power Supply	Seasonic P1000 Platinum
Mouse	Logitech G502
Keyboard	Logitech G910 Mech Keyboard
Software	Windows 11 Home

System Name	Niedersachsen / Ribe / Minsk
Processor	i3 3240 / i7-3520M / 4x Opteron 6376 @ 2.86GHz
Motherboard	BIOSTAR H61M / HP Q77 / Supermicro H8QG7
Cooling	Stock / Stock / 4x 1U G34
Memory	1x8GB / 2x4GB / 4x4GB
Video Card(s)	GTX260 / Intel HD 4000 / nVidia GT310
Storage	80GB Intel SSD / 256GB Intel SSD / 2x 60GB SSD (RAID1)
Display(s)	Dell 3007 + HP 2245w / 12.1" 1366x768 / None
Case	Antec NSK3480 / HP / Supermicro 1U
Audio Device(s)	Onboard
Power Supply	Enermax 500W / HP 130W / Supermicro Gold 1400W
Keyboard	IBM Model M
Software	Windows 7 (Niedersachsen/Ribe) / Linux Mint 17.2 (Minsk)