AMD FX OC'ers Club

[os2wiz]

Hello Super, just changed my o.c to 4.73 GHz from 4.6 +. My temps under stress with IBT set at high for 20 runs was 67 Celsius package (core). By the way I am awaiting product introduction of the Swiftech H320. Much better than Corsair H100 the Swiftech H220 has an all copper radiator with a pump that 3 times more powerful than on the Corsair H100. It has 5/8 inch tubing That is wider and more flexible than in Corsair units. Did I forget the fact it is expandable you can add a second radiator and a GPU block. I had said I wanted the H320 because soon to be released H220 comes with 240mm radiator and the 320 when released will come standard with 360mm all copper radiator. The price for the 220 is about $149 for the H320 $176. These are closed loop pre-filled AIO liquid coolers that are expandable. Checkout the Swiftech forum on overclocker.com . I estimate my core temps will drop at least 8 degrees Celcius under stress with H320.

 

[Batou1986]

Anyone here running fx4100 and 970a-ud3 v1.0/1.1 care to post there voltages to me thx

 

[d1nky]

Anyone here running fx4100 and 970a-ud3 v1.0/1.1 care to post there voltages to me thx

I was thinking on buying that board for my fx4100....whats it like??

 

[Durvelle27]

haven't been in here in awhile hows it going guys

 

[Batou1986]

I was thinking on buying that board for my fx4100....whats it like??

good i just cant get these voltages right since i updated bios keeps throwing errors in occt linpack with avx after like 30

 

[Durvelle27]

good i just cant get these voltages right since i updated bios keeps throwing errors in occt linpack with avx after like 30

is it the UD3 or D3



Edit: old

 

[d1nky]

nice to see a bunch of 4100 guys lol

 

[Batou1986]

this is pissing me off
im + .0750v on cpu core and + .50v on cpu nb still cant get back to my old stable 4.2Ghz that i had on the F5 bios

 

[Durvelle27]

this is pissing me off
im + .0750v on cpu core and + .50v on cpu nb still cant get back to my old stable 4.2Ghz that i had on the F5 bios

is there a BIOs newer than the one you have

 

[Batou1986]

Nope went from f5 to F8b got a backup of the F5 to flash back if this keeps this up
i went through the same thing before when i originally oc'd it on F5
trying auto voltages for shits and giggles now

 

[Durvelle27]

Nope went from f5 to F8b got a backup of the F5 to flash back if this keeps this up
i went through the same thing before when i originally oc'd it on F5
trying auto voltages for shits and giggles now

i wouldn't use auto when Oc'd as it will make the PC unstable because the volts will be jumping around low to high

 

[Batou1986]

I know goofing around since its being stubborn
I can only see core in your pic what are your settings for other voltages
Also I wanted to be clear even at 1.5v temps are good so core is not the issue

Just checked CPUz we have CPU's from the same batch all the numbers match

 

[Durvelle27]

CPU ~ x24 multi
1.440v
Bus Speed 200MHz
Rated FSB raised to 2400MHz from 2000MHz

NB ~ 2400MHz
1.15v

RAM ~ 1600MHz
1.5v

 

[Batou1986]

CPU ~ x24 multi
1.440v
Bus Speed 200MHz
Rated FSB raised to 2400MHz from 2000MHz

NB ~ 2400MHz
1.15v

RAM ~ 1600MHz
1.5v

And what did u test with I'm trying his now at 21x no go
Is that CPU nb or other nb voltage

 

[Durvelle27]

And what did u test with I'm trying his now at 21x no go
Is that CPU nb or other nb voltage

Prime95 for about 5 hours and the other nb as i don't believe CPU NB volts can be raised hmm i'll have to check though

 

[Batou1986]

Prime95 for about 5 hours and the other nb as i don't believe CPU NB volts can be raised hmm i'll have to check though

On my board its CPU nb vid

 

[Durvelle27]

On my board its CPU nb vid

that might be it but i wouldn't raise it unless your VRM has heatsinks on them and you have a fan blowing on them or they wood overheat and potentially fry the board

 

[Batou1986]

that might be it but i wouldn't raise it unless your VRM has heatsinks on them and you have a fan blowing on them or they wood overheat and potentially fry the board

i'll try it at normal, thanks for all your help i really do appreciate it.
i do have sinks and fans 8+2 vrm on the UD3
ive had it raised not to 1.5 tho, at +.100v its at 1.3500
what was the default voltage on yours it should be easy to determine which is which by comparing the default voltage
my normal nb is 1.105
the cpu nb VID is 1.2500 i think

 

[Durvelle27]

i'll try it at normal, thanks for all your help i really do appreciate it.
i do have sinks and fans 8+2 vrm on the UD3
ive had it raised not to 1.5 tho, at +.100v its at 1.3500
what was the default voltage on yours it should be easy to determine which is which by comparing the default voltage
my normal nb is 1.105
the cpu nb VID is 1.2500 i think

1.05 default NB and CPU NB can't remember but 1.5 is way to high

 

[Batou1986]

1.05 default NB and CPU NB can't remember but 1.5 is way to high

thx again
currently im at 21x, with 1.15 on the regular nb, stock 1.25 on the cpu nb, and 1.44 vcore
1hr AVX linpac 64 bit no errors
i ran this once and it found a error quickly, went into bios changed both HT speeds to 2000 and that seems to have done it
before they where 2000 2400 im going to try 2400 2400 now

if i determine that it was the HT speeds i will likey up the multi some more and test again
Edit: tried 2400 2400 windows loaded with basic color scheme so i will take that as a yes to it being HT related now testing 22.5x multi

 

[Durvelle27]

thx again
currently im at 21x, with 1.15 on the regular nb, stock 1.25 on the cpu nb, and 1.44 vcore
1hr AVX linpac 64 bit no errors
i ran this once and it found a error quickly, went into bios changed both HT speeds to 2000 and that seems to have done it
before they where 2000 2400 im going to try 2400 2400 now

if i determine that it was the HT speeds i will likey up the multi some more and test again
Edit: tried 2400 2400 windows loaded with basic color scheme so i will take that as a yes to it being HT related now testing 22.5x multi

have you disabled some of the power save features

 

[...PACMAN...]

Been messing tonight and got a stable 4.7Ghz, it actually never deviates from that voltage even at load (decent board). Also managed to get my four sticks of 1600mhz xms3 up to 1946Mhz still at 1.65v, not too shoddy.

My cooling however is currently crap but I'm thinking a decent AIO should get me to 5Ghz.

Lulz at the crappy gflops

 

[Batou1986]

have you disabled some of the power save features

yes all the usual suspects
QnQ
CPB
AMD APM

4.5 isn't stable, i just wanted to get back to 4.2
if i need more perf i will just pick up an FX83xx
thanks again

 

[os2wiz]

Been messing tonight and got a stable 4.7Ghz, it actually never deviates from that voltage even at load (decent board). Also managed to get my four sticks of 1600mhz xms3 up to 1946Mhz still at 1.65v, not too shoddy.

My cooling however is currently crap but I'm thinking a decent AIO should get me to 5Ghz.

Lulz at the crappy gflops

http://img.techpowerup.org/130213/4.7.jpg

http://img.techpowerup.org/130213/Capture991.jpg

For cooling try the Swiftech H220 will be released in next 10 days all copper 240 mm radiator 5 watt pump (3 times more powerful than Corsair H100 pump. It also while AIO offers expandability. You can add another radiator of various sizes and a GPU block.

 

[Super XP]

For cooling try the Swiftech H220 will be released in next 10 days all copper 240 mm radiator 5 watt pump (3 times more powerful than Corsair H100 pump. It also while AIO offers expandability. You can add another radiator of various sizes and a GPU block.

This is better than the Corsair H 100 series?