Your PC ATM

[t_ski]

and harder to read

+1

 

[n0tiert]

After 9 hard Weeks of Abstinence due Mainboard RMA and on the end telling me that Crosshair V Formula has reached EOL (End of Live) before guaranty exhausted

Here is a new Toy i´m throwing in:

to bad the EK crosshair V PWM/NB Waterblock doesn´t fit the Z Modell on NB Die, they messed the first up telling ppl
to isolate NB perfectly and just let to stick out the die , to prevent shortcuts

OLD:

NEW:

Prepared for Battle

 

[Random Murderer]

After 9 hard Weeks of Abstinence due Mainboard RMA and on the end telling me that Crosshair V Formula has reached EOL (End of Live) before guaranty exhausted

Here is a new Toy i´m throwing in:

http://img.techpowerup.org/130815/P1010034.jpg
http://img.techpowerup.org/130815/P1010037.jpg

to bad the EK crosshair V PWM/NB Waterblock doesn´t fit the Z Modell on NB Die, they messed the first up telling ppl
to isolate NB perfectly and just let to stick out the die , to prevent shortcuts

OLD:
http://img.techpowerup.org/130815/783670_1__8418897-1.jpg

NEW:
http://img.techpowerup.org/130815/21406_1__waek_554_2g.jpg

Prepared for Battle

Is that what they sent to replace the non-Z you had before, or did you buy that?

 

[n0tiert]

Is that what they sent to replace the non-Z you had before, or did you buy that?

i received full refund and got that board instead

 

[de.das.dude]

painting

first time painting.

never been good at painting. all the edges were hand done pinstriping style with a thin brush

 

[d1nky]

@notiert I missed ya man!

that boards looks sweeett! I really want one with the block as well... be like benchy magic!

 

[n0tiert]

@notiert I missed ya man!

that boards looks sweeett! I really want one with the block as well... be like benchy magic!

thx m8, yeeeah i still have a second Crosshair V Formula which also needs to be RMA´d lets see what i get as refund

me still wanna do a mil mod , so i might get the Sabertooth R2.0 for it

 

[de.das.dude]

These damned ASUS boards need to much RMAing these days.

 

[n0tiert]

These damned ASUS boards need to much RMAing these days.

damn right , bro ! both of em was in first charge i think and they all had probs (CPU_LED)

i would luv to see EPOX back in biz

 

[d1nky]

now im jealous! even if it doesn't work!

you sure you don't want an asrock fatality instead of a saber

 

[GreiverBlade]

you must be really popular, you have a lot of fans!

ok i didnt see that one comming

so i returned to my original pattern ... since the Spectre Pro are too awesome to go in the lesser rig ...

red fan white CCFL for the main white fan red CCFL for the second.

slight change : 7870 2gb in place of the 480 1.5gb and yes its one of those 1st serie crap cap black screen of doom who need a little tweaking (ie: undervolting/underclocking core and oc mem) but i got it for less the price of a 7750

the screwless fixation is a bit less stable than the one from Antec but they do just fine

the little one got a 200mm in place (since the TX3 Evo is compatible with)

and this is what my desk look atm ...

both got a fresh install of win 7 64 pro now

 

[the54thvoid]

Moved my stuff from my TJ07 to a Dimas Tech Easy V3 test bench. Not sure how an open bench can be quieter but it is.... Got D5 pump at right speed to mix harmoniously with desk frequency. Can't hear it at all.

 

[radrok]

Aaah I love test benches

 

[MT Alex]

Moved my stuff from my TJ07 to a Dimas Tech Easy V3 test bench. Not sure how an open bench can be quieter but it is.... Got D5 pump at right speed to mix harmoniously with desk frequency. Can't hear it at all.

http://img.techpowerup.org/130815/easy1.jpg

http://img.techpowerup.org/130815/easy2.jpg

http://img.techpowerup.org/130815/easy3.jpg

http://img.techpowerup.org/130815/easy5.jpg

I'm going to have to move to acrylic very soon, it looks great!

 

[the54thvoid]

I'm going to have to move to acrylic very soon, it looks great!

It's good fun using the heat gun to bend but it's pretty damn hard to get off centre 90 degree turns. I ruined a couple of lengths trying to get the cpu to gfx - you can see that i used a barb and hose in the end for that connection

 

[n0tiert]

It's good fun using the heat gun to bend but it's pretty damn hard to get off centre 90 degree turns. I ruined a couple of lengths trying to get the cpu to gfx - you can see that i used a barb and hose in the end for that connection

Good way to bend pipes is filling them all the way with silica sand to avoid that the pipe flatens due bend , dunno if 100% works on acryl, may the sand could dirt´n the acryl on the bend (should give it a try)

 

[Thrackan]

Good way to bend pipes is filling them all the way with silica sand to avoid that the pipe flatens due bend , dunno if 100% works on acryl, may the sand could dirt´n the acryl on the bend (should give it a try)

Sand will probably scratch the acrylic on the inside.

 

[Knight091]

I have a problem. The PSU works but when I put the 24 pin into my board nothing. When I trip it with a paper clip it works as does everything hooked to the PSU. The board lights up like it is ready to start but nothing. Any help.

 

[n0tiert]

I have a problem. The PSU works but when I put the 24 pin into my board nothing. When I trip it with a paper clip it works as does everything hooked to the PSU. The board lights up like it is ready to start but nothing. Any help.

Try get a voltmeter for measuring the current psu or 2nd psu to tryout....
or your board may need 4, 8, 8+4 + 24pin, what board u got ?

 

[Durvelle27]

Added a second rad and got some new tubing

 

[RCoon]

Added a second rad and got some new tubing


http://img545.imageshack.us/img545/6951/9xq8.jpg

Are those enormous air bubbles or a trick of the light?
Looks great though! W/C that GPU!

 

[ALMOSTunseen]

Are those enormous air bubbles or a trick of the light?
Looks great though! W/C that GPU!

It's not even filled They're droplets of water

 

[Thrackan]

Are those enormous air bubbles or a trick of the light?
Looks great though! W/C that GPU!

Doesn't look like there's any water in there yet.

 

[Durvelle27]

Are those enormous air bubbles or a trick of the light?
Looks great though! W/C that GPU!

There's no water in it as I drained it. Those are just droplets from cleaning them. Also this isn't the same tubing as before. Its much better.

And yes I am watercooling my GPU.

This is the block I got


EK Radeon HD 7970 VGA Liquid Cooling Block - Acetal + Nickel CSQ (EK-FC7970 - Acetal + Nickel CSQ)

http://www.frozencpu.com/products/1...C7970_-_Acetal_Nickel_CSQ.html?tl=g30c357s922


and this back plate

EK Radeon 7970 VGA Liquid Cooling RAM Backplate - Black CSQ (EK-FC7970 Backplate - Black CSQ)

http://www.frozencpu.com/products/1...970_Backplate_-_Black_CSQ.html?tl=g30c357s922

 

[Knight091]

Try get a voltmeter for measuring the current psu or 2nd psu to tryout....
or your board may need 4, 8, 8+4 + 24pin, what board u got ?

I have the ASUS Rampage IV Formula LGA 2011. All it has is the 24 pin and the CPU power.