Techpowerup! Hwbot Club

[d1nky]

I knew this would pick up after people seen enough of noob benchers.

I think its bench time!

And thanks for the help guys

for reference if people forget http://hwbot.org/article/general_rules

 

[erocker]

Whoa, nice ambient core clocks erocker! Did you disable tesselation for that run?

But, of course! This card can handle these clocks with it on too. Set at 1.275v in Trixx... Real voltage is probably around 1.220.

 

[EarthDog]

Hang on to that bad boy!

PS - Push that CPU to 5Ghz if you can... you may get closer to breaking 14k.

 

[erocker]

PS - Push that CPU to 5Ghz if you can... you may get closer to breaking 14k.

I'd have to delid it or use more extreme cooling.. Not going to do that. I might be able to do 4.8... maybe.

 

[Durvelle27]

A10-6800K @4.8GHz

wPrime 32M 14 secs

 

[EarthDog]

I would post your 'best'. If everyone starts saturating a single thread with incremental improvements/results, this monster is going to groooooooooooooooooooooooooooow!

 

[Durvelle27]

I would post your 'best'. If everyone starts saturating a single thread with incremental improvements/results, this monster is going to groooooooooooooooooooooooooooow!

**Best**


A10-6800K @4.8GHz

CineBench R11.5 - 4.04

 

[vega22]

Hey does any one know what would be a safe bench voltage for a sandy bridge-e CPU cuz I wanna see if I can push 5.3+ Ghz for a 6 core cinebench run.

as said its more about your cooling, but i wouldnt sweat if i was throwing 1.6v thru that chip if it was mine and running cool enough. thats what is great about sandy, even good air will keep it stable on silly high volts and extreme cooling doesnt gain you much, if anything, in terms of max clocks.

I'd have to delid it or use more extreme cooling.. Not going to do that. I might be able to do 4.8... maybe.

shame you are so far away dude, i have a 5ghz stable sandy i7 you could use for that had you been more local. 1300mhz 7970 is a very nice sample dude

I would post your 'best'. If everyone starts saturating a single thread with incremental improvements/results, this monster is going to groooooooooooooooooooooooooooow!

what we need to do is start a thread for each benchmark really. then we can spam that, or edit the same post. talk about the best way to get the best scores and then all the info will be together for the future too you know.

i bet if you spent some time searching you would find lots of tips on most of these benchmarks anyway.

put a link in the op to hwbot, the team, and also the team rankings page for that bench.

that way people can see the table but will also know they need to join up on their site to join in if they want to come play

pimps the team whilst pandering to most members base instict of wanting to join in/wave epeen.

 

[erocker]

shame you are so far away dude, i have a 5ghz stable sandy i7 you could use for that had you been more local. 1300mhz 7970 is a very nice sample dude

Thanks for the nice sentiment man! I'm not done yet... I just need to wait for a cooler night and I'll clock this CPU higher.. I don't think 1300mhz is the limit of this GPU either. I still have .025v to add yet. Thing is, this card likes to whine when pushed... It's a little concerning I suppose.

 

[vega22]

tell you the truth dude most gpu i have had the past few years have had whined as i turned up the volts. its the area which imo limits most cards overclocking ability but i think it is by design.

i mean how many titans would of sold had you been able to turn the wick up on the 680 all the way to 11?

but thats another tale all together.

yea man thats a good plan tbh as cooler air cools everything. i do mean it, i mean its all about being a team and helping if you can. you know anybody in my neck of the woods who wants to come and bolt something to my phase cooler they are more than welcome. i cant use it atm but i would be happy to see someone use it

 

[d1nky]

Thanks for the nice sentiment man! I'm not done yet... I just need to wait for a cooler night and I'll clock this CPU higher.. I don't think 1300mhz is the limit of this GPU either. I still have .025v to add yet. Thing is, this card likes to whine when pushed... It's a little concerning I suppose.

is that 7970 on water?!

my 7950 can do 1250/1750 on air majority of benches, but its not even cool here so im struggling to get a full 3d11 run.

we could do with some intel superpi and wprimes, if anyone can get decent enough scores

 

[vega22]

dinky what vram do you run to get it to 1750 dude?

mine tops out at 1550 on stock volts but i never really tried for any more from it.

 

[Durvelle27]

is that 7970 on water?!

my 7950 can do 1250/1750 on air majority of benches, but its not even cool here so im struggling to get a full 3d11 run.

we could do with some intel superpi and wprimes, if anyone can get decent enough scores

My HD 7970 can only do 1250/1700 on water while still staying under 50c

 

[erocker]

My HD 7970 can only do 1250/1700 on water while still staying under 50c

What kind of block do you have on it?

Though... I have my 7970 on it's own loop with a 3x120 and a MCP355 w/ EK full coverage block.

 

[OhWell]

http://hwbot.org/submission/2417294_ohwell_3dmark11___performance_2x_geforce_gtx_780_24709_marks?recalculate=true
OK?
My first post

 

[Durvelle27]

What kind of block do you have on it?

Though... I have my 7970 on it's own loop with a 3x120 and a MCP355 w/ EK full coverage block.

XSPC 240mm w/2x Helix Fans & MCP655
EK EK-FC7970 Full Cover Block w/Backplate

 

[cdawall]

Apparently I am a member. The 9370 is sitting on my desk, but I wont have time to get to it until Sept with moving and everything. I think I have found a place that has LN2, but I do not own a dewer.

 

[vega22]

http://hwbot.org/submission/2417294_ohwell_3dmark11___performance_2x_geforce_gtx_780_24709_marks?recalculate=true
OK?
My first post

welcome dude

very nice system you have there

22nd in the world ever with 2 cards for 3dmark 11 is a pretty cool way to introduce yourself

 

[Rangerjr1]

http://hwbot.org/submission/2417294_ohwell_3dmark11___performance_2x_geforce_gtx_780_24709_marks?recalculate=true
OK?
My first post

Wow thats a ballin system! Welcome man!

 

[OhWell]

welcome dude

very nice system you have there

22nd in the world ever with 2 cards for 3dmark 11 is a pretty cool way to introduce yourself

Thanks

These 780 Classified really are beast but I had my 7970's OC well too

http://hwbot.org/submission/2417310_ohwell_3dmark11___performance_2x_radeon_hd_7970_22160_marks?recalculate=true

BTW I have LN2 equip. for CPU + GPU and access to cold juice to

 

[Durvelle27]

Thanks

These 780 Classified really are beast but I had my 7970's OC well too

http://hwbot.org/submission/2417310_ohwell_3dmark11___performance_2x_radeon_hd_7970_22160_marks?recalculate=true

BTW I have LN2 equip. for CPU + GPU and access to cold juice to

Are we allowed to adjust test

 

[OhWell]

Are we allowed to adjust test

?
Not sure what you mean, if you mean disabling Tessalation then yes on HWbot but not for hall of fame at 3dmark.com.

 

[Durvelle27]

?
Not sure what you mean, if you mean disabling Tessalation then yes on HWbot but not for hall of fame at 3dmark.com.

Ahh thx

 

[d1nky]

omg ohwell, just what we need to get the team scoring big points! nice system man!

and marsey my volts for 1250/1750 are 1300v/1650v

some benches don't need any more volts on mem other than stock, but 3d11 does?!

the difference is if its Hynix or elpida (or golden sammies)

I think this will kick off quite nicely

 

[Durvelle27]

omg ohwell, just what we need to get the team scoring big points! nice system man!

and marsey my volts for 1250/1750 are 1300v/1650v

some benches don't need any more volts on mem other than stock, but 3d11 does?!

the difference is if its Hynix or elpida (or golden sammies)

I think this will kick off quite nicely

Is it safe to adjust mem volts. The highest i went on it is 1615mV