EK Introduces Industry-First DDC Heatsink Housing

[Cristian_25H]

EK Water Blocks, Ljubljana based premium water cooling gear manufacturer, is proud to introduce industry-first metallic heatsink housing upgrade kit for world-renown Xylem/Laing DDC type water pumps.

EK-DDC Heatsink Housing is an heatsink upgrade kit for any Laing DDC type water pump which replaces the original plastic housing. This add-on vastly improves the cooling performance of the motor and electronics and thus prolongs the lifespan of the water pump.





Optimal heat transfer is ensured by the use of enclosed thermal pad pre-cut for your convenience. Due to it's metallic construction and finned design EK-DDC Heatsink Housing amplifies the effect of airflow therefore placing the water pump in front of any fan or radiator will dramatically improve the cooling performance. Additionally, cooling performance can further be improved by filling the cavities with lithium (electrically non-conductive) grease.

This product is guaranteed to be compatible with any EK-DDC type water pump (EK-DDC X-TOP type) or water pump / reservoir combo unit with (EK-DDC X-RES type), including DDC BAY X-RES.

EK-DDC Heatsink Housing is made from cast ZAMAK (zinc, aluminum, magnesium, copper) alloy and features either nickel plated- or glossy black paint finish (depending on the variant):

• EK-DDC Heatsink Housing - Nickel - 19,95€
• EK-DDC Heatsink Housing - Black - 19,95€

This product also features vibration dampening rubber mounting system which effectively de-couples the water pump from the rest of the computer chassis.

Enclosed:

• EK-DDC Heatsink Housing
• Pre-cut thermal pad
• Mounting mechanism with vibration dampers

EK-DDC Heatsink Housing is readily available for purchase through EK Webshop and Partner Reseller Network!

View at TechPowerUp Main Site

 

[player-x]

Lol, nice marketing BS

This add-on vastly improves the cooling performance of the motor and electronics

I own a DCC and installed some of them in some systems, but as this is a water-pump it gets its cooling from the internal water flow, and the external cooling dose very little, tho the anti vibration is nice, and i would consider the solution for that reason, but not for the added cooling!

But i still would prefer one of the many dual bay pump/res solution.

 

[MxPhenom 216]

I own a DCC and installed some of them in some systems, but as this is a water-pump it gets its cooling from the internal water flow, and the external cooling dose very little, tho the anti vibration is nice, and i would consider the solution for that reason, but not for the added cooling!

But i still would prefer one of the many dual bay pump/res solution.

yeah, I have an MCP350 pump, and it doesn't got hot really, so I don't understand the need for this.

 

[Jorge]

EK is looking pretty desperate these days with all the Press Releases.

 

[dj-electric]

EK is looking pretty desperate these days with all the Press Releases.

What? how did you came into this conclusion? I'm starting to notice a certain pattern in your posts...

 

[MxPhenom 216]

What? how did you came into this conclusion? I'm starting to notice a certain pattern in your posts...

Worthless-ness? He only ever posts to troll news articles.

 

[BiggieShady]

What?

LoL, I noticed "What?" is the most common response to Jorge's posts you see, if a company doesn't have a product that sells itself than it's desperate and needs to do press releases and marketing

 

[erocker]

desperate

I'm starting to think that word doesn't mean what you think it means.

Enough about you though...

This is a great product for those who have limited space with their pumps and need the passive cooling.

 

[Sinzia]

I have two MCP35X's and the bottoms of them get pretty damn hot. The motor itself may be cooled by the water, but the PCB and power components don't.

I'm not saying they need the heat sink, but it certainly can't hurt either.

Do keep in mind that the 35x's are more powerful and use more wattage than a 350/355.

 

[kroks]

Industry-First?
http://koolance.com/heat-sink-for-pmp-400-pump

http://www.swiftech.com/MCP35X-HS.aspx
http://www.swiftech.com/MCP35X2-HS.aspx
not housing but come on, same thing..

 

[HumanSmoke]

EK is looking pretty desperate these days with all the Press Releases.

Well done Jorge! A+ effort in looking like a fool:

AMD is definitely hitting on all cylinders with the intro of HuMA/HSA and Kaveri. Now with FirePro and consumer graphics cards being designed to use the benefits of AMD's new tech, life is good....AMD press announcement 15th November 2013

The AMD APU revolution has just begun....AMD press announcement 14th November 2013

As far as AMD is concerned they have definitely "turned the corner" to a better financial future. Kaveri, HUMA and HSA have created a historic and monumental change in the PC landscape that will surprise and please all....AMD press announcement 13th November 2013

AMD is leading the way in APUs.....AMD press announcement 12th November 2013

 

[Mussels]

if this can reduce the noise of existing pumps as well as working as a 'spare part' then i'm all for it. seems like a good idea.

 

[Totally]

I have two MCP35X's and the bottoms of them get pretty damn hot. The motor itself may be cooled by the water, but the PCB and power components don't.

I'm not saying they need the heat sink, but it certainly can't hurt either.

Do keep in mind that the 35x's are more powerful and use more wattage than a 350/355.

Phew, for a second there I was starting to think I was the only owner of DDCs that who undersides get really hot.