AMD FX OC'ers Club

Durvelle27 · Jan 8, 2014

If stock and its hitting 45°C then I think its heating up past the limit. You also have to watch socket temps

ypoora1 said:
The puter freezes(no bsod or anything, it just freezes on desktop) as soon as i press start test. On stock it runs about 45C @cpu and i have no idea what the board temps are but the vrm sink burned my fingers so i put a server fan on it, and now it's only slightly warm(but stupidly loud...)

ypoora1 · Jan 8, 2014

Durvelle27 said:
If stock and its hitting 45°C then I think its heating up past the limit. You also have to watch socket temps

That's load temp on prime95. Socket temp is around 50.

suraswami · Jan 8, 2014

ypoora1 said:
Turned off all means of power saving(C1e,C6,EPU,etc), bumped cpu voltage to 1,4v~, NB voltage on +0.0125, multiplier of 24 for 4,4ghz, +0,05 DRAM.

Edit: I should add the more i increase ANYTHING it seems, the faster it locks up.

Can you run everything stock to see if it locks up?

Try a different stress program say AOD, OCCT or IBT?

ypoora1 · Jan 8, 2014

suraswami said:
Can you run everything stock to see if it locks up?

Try a different stress program say AOD, OCCT or IBT?

No lockups at stock. I'll try with these programs, but sometimes the computer locks up only seconds after even POSTing.

Johan45 · Jan 8, 2014

ypoora1 said:
Turned off all means of power saving(C1e,C6,EPU,etc), bumped cpu voltage to 1,4v~, NB voltage on +0.0125, multiplier of 24 for 4,4ghz, +0,05 DRAM.

Edit: I should add the more i increase ANYTHING it seems, the faster it locks up.

Don't know if that was a typo but a Multi of 24 is 24x200= 4800??
Try setting the voltage manually to 1.4, Got to the Digi plus section on the advanced page and set the CPU and NB LLC to high. Set a multiplier of 21.5 and see what happens. The system should boot and be relatively stable.

Durvelle27 · Jan 8, 2014

Johan45 said:
Don't know if that was a typo but a Multi of 24 is 24x200= 4800??
Try setting the voltage manually to 1.4, Got to the Digi plus section on the advanced page and set the CPU and NB LLC to high. Set a multiplier of 21.5 and see what happens. The system should boot and be relatively stable.

This XD

No wonder is froze you were pushing 4.8GHz. Funny i didn't catch that. Good Johan45 for spotting that if its not a typo

d1nky · Jan 8, 2014

LOL i missed that as well!

give it some volts!

Durvelle27 · Jan 8, 2014

d1nky said:
LOL i missed that as well!

give it some volts!

At 4.8GHz his cooler wouldn't be able to keep it cool as its a single tower Air cooler

ypoora1 · Jan 8, 2014

Johan45 said:
Don't know if that was a typo but a Multi of 24 is 24x200= 4800??
Try setting the voltage manually to 1.4, Got to the Digi plus section on the advanced page and set the CPU and NB LLC to high. Set a multiplier of 21.5 and see what happens. The system should boot and be relatively stable.

...whoops. i meant 21, my bad. My goal is to push 4,5ghz, i was already aware i wouldn't be going towards 5.

ypoora1 · Jan 8, 2014

Johan45 said:
Don't know if that was a typo but a Multi of 24 is 24x200= 4800??
Try setting the voltage manually to 1.4, Got to the Digi plus section on the advanced page and set the CPU and NB LLC to high. Set a multiplier of 21.5 and see what happens. The system should boot and be relatively stable.

I'm typing this running @4.5ghz and prime95, so i think this did it!

Johan45 · Jan 8, 2014

ypoora1 said:
I'm typing this running @4.5ghz and prime95, so i think this did it!

Nice to see I could help. All FX cpus seem to require different voltages for different clocks. My 8350 needs 1.476 to hit 4.64G But on the other hand my 9370 only uses 1.428v for 4.8 but the caveat is that was on really good cooling. On the AIO I have it needed 1.476v for the same 4.8 clock. These are all P95 tested and stable.

ypoora1 · Jan 8, 2014

Johan45 said:
Nice to see I could help. All FX cpus seem to require different voltages for different clocks. My 8350 needs 1.476 to hit 4.64G But on the other hand my 9370 only uses 1.428v for 4.8 but the caveat is that was on really good cooling. On the AIO I have it needed 1.476v for the same 4.8 clock. These are all P95 tested and stable.

i'm running 1.31 according to Core Temp, but it's around 1,375.

Edit: 1,352 according to CPU-Z.

Johan45 · Jan 8, 2014

ypoora1 said:
i'm running 1.31 according to Core Temp, but it's around 1,375.

Edit: 1,352 according to CPU-Z.

You may want to use something like HWMonitor (non pro) it's free and will show the max and min voltage. Whenn LLC is used it can up the voltage a bit form what you have set in the BIOS.

Pill Monster · Jan 8, 2014

ypoora1 said:
i'm running 1.31 according to Core Temp, but it's around 1,375.

Edit: 1,352 according to CPU-Z.

CoreTemp displays VID not Vcore.

d1nky · Jan 8, 2014

i like hwinfo64

best one ive ever used, and its programmable to shut down at certain temps etc

ypoora1 · Jan 8, 2014

Fully stable on 4.5, couldn't be happier! Tried to see if it would go any higher, but i'm afraid this is my limit pretty much.

Johan45 · Jan 9, 2014

That's a good clock for that board IMO

suraswami · Jan 10, 2014

d1nky said:
mines an asrock..

Quick question - when you put the machine to S3 state (sleep), does the power LED blink or does the machine seem completely off?

This is one of the features of Asus boards that I hate and don't want to buy. Does the ASRock also do this?

d1nky · Jan 11, 2014

On the fatality you can choose if the lights are on.

Never used sleep tho

suraswami · Jan 11, 2014

d1nky said:
On the fatality you can choose if the lights are on.

Never used sleep tho

anybody else used the feature?

d1nky · Jan 11, 2014

lol tridentsx just arrived!

WOOP!

Durvelle27 · Jan 11, 2014

suraswami said:
anybody else used the feature?

Lol nope my PC never sleep like me XD

YautjaLord · Jan 11, 2014

Wassup, long time no see.

Planning to buy 3 or 4 things to build my FX-based PC, RAM is not one of them. lol Anyway, need help from any of you that either have this particular RAM or had: G.Skill Ripjaws X 2x8GB 1333MHz. Is it possible to OC it to say 1866 or even 2133MHz? How high or low to set timings/voltage/etc..., if you played & actually successfully OC'd this particular RAM to that frequency. By March 10 i'll probably have CPU (FX-8350, yeah, couldn't buy til now

) & rest of components, & tell you how it went. Cheers, thanks in advance.

Happy 2014 everyone. :toast:

Johan45 · Jan 12, 2014

YautjaLord said:
Wassup, long time no see.

Planning to buy 3 or 4 things to build my FX-based PC, RAM is not one of them. lol Anyway, need help from any of you that either have this particular RAM or had: G.Skill Ripjaws X 2x8GB 1333MHz. Is it possible to OC it to say 1866 or even 2133MHz? How high or low to set timings/voltage/etc..., if you played & actually successfully OC'd this particular RAM to that frequency. By March 10 i'll probably have CPU (FX-8350, yeah, couldn't buy til now ) & rest of components, & tell you how it went. Cheers, thanks in advance.

Happy 2014 everyone.

You never said anything about the timings or volts. Here's a rundown on some 1600 CL9 may be very similar. http://www.overclockers.com/forums/showthread.php?p=7009689

psyko12 · Jan 12, 2014

Brothers/Sisters, would this do fine rather than a hyper 212 evo? The evo is hard to come by here now...

Will it handle the 8350 with a mild oc to 4.5? Thanks!

System Name	Black Prometheus
Processor	\|AMD Ryzen 7 1700
Motherboard	ASRock B550M Pro4\|MSI X370 Gaming PLUS
Cooling	Thermalright PA120 SE \| AMD Stock Cooler
Memory	G.Skill 64GB(2x32GB) 3200MHz \| 32GB(4x8GB) DDR4
Video Card(s)	ASUS DirectCU II R9 290 4GB
Storage	Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s)	LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case	DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s)	LG Dolby Atmos 5.1
Power Supply	Corsair RMX850 Fully Modular\| EVGA 750W G2
Mouse	Logitech Trackman
Keyboard	Logitech K350
Software	Windows 10 EDU x64

System Name	Helios
Processor	AMD Ryzen 5 2600 @ 4.0
Motherboard	MSI X470 Gaming Pro Carbon
Cooling	Corsair iCUE H150i RGB Pro XT
Memory	16GB Corsair Vengeance Pro RGB DDR4-3200
Video Card(s)	Gigabyte Geforce GTX 1080 G1 Gaming
Storage	256GB Hynix Pc401 & 3TB of HDD storage
Display(s)	AOC CU34G2X + 2x Iiyama E2483HS
Case	In-Win 303
Audio Device(s)	Teufel Concept C 200 USB & Schiit Fulla 2 w/ Beyerdynamic DT 990 Pro 250Ohm
Power Supply	Corsair RM1000
Mouse	Logitech G502 Proteus Spectrum
Keyboard	Logitech G512
Software	Windows 10

System Name	---
Processor	FX 8350 @ 4.00 Ghz with 1.28v
Motherboard	Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling	Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory	Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s)	Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage	Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s)	3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case	AeroCool XPredator X3
Audio Device(s)	Built-in Realtek
Power Supply	Corsair HX1000 Modular
Software	Windows 10 Pro 64 bit

System Name	Helios
Processor	AMD Ryzen 5 2600 @ 4.0
Motherboard	MSI X470 Gaming Pro Carbon
Cooling	Corsair iCUE H150i RGB Pro XT
Memory	16GB Corsair Vengeance Pro RGB DDR4-3200
Video Card(s)	Gigabyte Geforce GTX 1080 G1 Gaming
Storage	256GB Hynix Pc401 & 3TB of HDD storage
Display(s)	AOC CU34G2X + 2x Iiyama E2483HS
Case	In-Win 303
Audio Device(s)	Teufel Concept C 200 USB & Schiit Fulla 2 w/ Beyerdynamic DT 990 Pro 250Ohm
Power Supply	Corsair RM1000
Mouse	Logitech G502 Proteus Spectrum
Keyboard	Logitech G512
Software	Windows 10

System Name	Gamer/ HTPC
Processor	AMD Ryzen 5 2600
Motherboard	ROG Crosshair VI
Cooling	Alphacool Eisbaer 420 AIO
Memory	G.Skill TridentZ RGB 2x8GB 3333 CL14
Video Card(s)	Gigabyte Aorus RX 580
Storage	Corsair Neutron 480 GB
Display(s)	Samsung 42" 1080p
Case	Phanteks Enthoo Luxe Tempered Glass
Power Supply	Corsair 750
Software	Win10 Pro
Benchmark Scores	http://hwbot.org/user/johan45/

AMD FX OC'ers Club

Durvelle27

Moderator

ypoora1

suraswami

ypoora1

Johan45

Durvelle27

Moderator

d1nky

Durvelle27

Moderator

ypoora1

ypoora1

Johan45

ypoora1

Johan45

Pill Monster

d1nky

ypoora1

Johan45

suraswami

d1nky

suraswami

d1nky

Durvelle27

Moderator

YautjaLord

Johan45

psyko12

System Name	Zotan
Processor	i9-10850K
Motherboard	Gigabyte Z490 Gaming X AX
Cooling	H100
Memory	32GB Viper 3200
Video Card(s)	Zotac RTX3080
Case	Airflow 275R
Power Supply	RMX850
Benchmark Scores	d1nky@hwbot.org

System Name	Zangief (Reborn)
Processor	AMD Ryzen R7 1700X @ 3.825ghz , 1.35v
Motherboard	Gigabyte GA-AX370 Gaming K7 Rev 1.0 BIOS F51e
Cooling	Noctua NH-D15 Push / Push Config \| 2x ML120 \| 2x Phanteks 120 mm
Memory	2x8GB G.Skill Trident Z @ 3200mhz cl 16 @ 1.45v
Video Card(s)	Gigabyte Aorus GTX 1080 +100 core / +550 mem
Storage	250 GB Samsung Evo 850 / 1tb WD Black / 4tb WD Blue / 512GB Adata XPG Pro SX8200
Display(s)	Acer Predator XB271HU \|Asus VX239H 23" AH-IPS Led
Case	Phanteks Enthoo Pro M TG
Audio Device(s)	On Board Realtek HD / Logitech G633/G933 Gaming Headset / Corsair H70 Pro Wireless
Power Supply	Corsair HX750i
Mouse	Logitech G903 and G602 Wireless Gaming \| Logitech Proteus Core G502
Keyboard	Corsair K70 Cherry Red \| Corsair K70 RGB MK.2 Cherry Browns \| Akko 3908N TTC Flame Reds
Software	Windows 11 Pro

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2