AMD FX OC'ers Club

ypoora1 · Apr 1, 2014

Random Murderer said:
JEDEC 4: 1333 9-9-9-24-33 @1.5V
Running at: 1336 11-11-11-28-33
WTF? Were you having issues running stock speeds? That chip should be able to run 1866 CAS 9 or 10 with very little work, more if you put the effort in.

Whoops, forgot to refresh. But i haven't touched anything RAM related, i have no clue how timings work.

Johan45 · Apr 1, 2014

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

Durvelle27 · Apr 1, 2014

ypoora1 said:
I don't think this stuff will OC at all without heatspreaders and being 8GB per strip. I would repalce it, if i had funds of any kind.

I remember changing those, but i'll look into it.

just give it a shot as your losing out on some serious performance

ypoora1 · Apr 1, 2014

Back from BIOS, both CPU and CMU/MB are already set to high, i don't dare touching anything else because i don't know what half of it means. also, if my RAM timings are all fucked up, what should they be? i'll wrie it down and put it in manually, just specify which i which because i see RAS, CAS, tRAS, etc and i have no idea if those work in any kind of specific order.

Durvelle27 said:
just give it a shot as your losing out on some serious performance

I don't feel like toasting things i paid for, and these are the most basic low profile RAM strips i've ever seen.

Random Murderer · Apr 1, 2014

ypoora1 said:
Back from BIOS, both CPU and CMU/MB are already set to high, i don't dare touching anything else because i don't know what half of it means. also, if my RAM timings are all fucked up, what should they be? i'll wrie it down and put it in manually, just specify which i which because i see RAS, CAS, tRAS, etc and i have no idea if those work in any kind of specific order.

I don't feel like toasting things i paid for, and these are the most basic low profile RAM strips i've ever seen.

I bet mine are smaller, and they clock from 1600 to over 2600.
Here's what I would do in your situation as a start:
Set the RAM speed to 1600
Set the VDIMM to 1.55V
Set the CAS Latency (CL) to 9
Set the RAS to CAS (tRCD) to 9
Set the RAS Precharge (tRP) to 9
Set the RAS Cycle (tRAS) to 24

That should up your performance a bit while still being pretty deep in the safe zone.
BTW, thought this might help a little. It's old, but still relevant.

ypoora1 · Apr 1, 2014

Random Murderer said:
I bet mine are smaller, and they clock from 1600 to over 2600.
Here's what I would do in your situation as a start:
Set the RAM speed to 1600
Set the VDIMM to 1.55V
Set the CAS Latency (CL) to 9
Set the RAS to CAS (tRCD) to 9
Set the RAS Precharge (tRP) to 9
Set the RAS Cycle (tRAS) to 24

That should up your performance a bit while still being pretty deep in the safe zone.
BTW, thought this might help a little. It's old, but still relevant.

Gonna give it a try!

ypoora1 · Apr 1, 2014

ypoora1 said:
Gonna give it a try!

Well, That's not happening. The timings are set, the voltage is at 1.55, but as soon as i set the speed to 1600, it doesn't POST.

Edit: also, knocked the CPU multi down by .5, running 4.4 now. i wonder if that'll help temps.

Random Murderer · Apr 1, 2014

ypoora1 said:
Well, That's not happening. The timings are set, the voltage is at 1.55, but as soon as i set the speed to 1600, it doesn't POST.

Edit: also, knocked the CPU multi down by .5, running 4.4 now. i wonder if that'll help temps.

It's been since I built this AMD rig that I clocked RAM on an AMD system... I'm probably missing something here.
Do you have a setting for tRFC?

ypoora1 · Apr 1, 2014

Random Murderer said:
It's been since I built this AMD rig that I clocked RAM on an AMD system... I'm probably missing something here.
Do you have a setting for tRFC?

Just disabled AMD turbo core and knocked thet .5 CPU multi back on(I'm a bad person, i know). I remember seeing tRFC though, so pretty sure i have that.

Johan45 · Apr 1, 2014

Trying for that ram speed can be iffy some sticks just don't like it. You could try the 9-9-9-24-33 with 1.65v it won't hurt the ram at all. And yes the lower speed will help the temps and you may be able to drop the voltage a bit too but I don't know if I'd do that until you have it stable. Same for the ram. If you change too many things at once you'll not know what is makig it unstable.

ypoora1 · Apr 1, 2014

Johan45 said:
Trying for that ram speed can be iffy some sticks just don't like it. You could try the 9-9-9-24-33 with 1.65v it won't hurt the ram at all. And yes the lower speed will help the temps and you may be able to drop the voltage a bit too but I don't know if I'd do that until you have it stable. Same for the ram. If you change too many things at once you'll not know what is makig it unstable.

Well, disabling the AMD turbo core seems to have dropped me to 68/69 with the 4.5 OC. i'll try giving the ram 1,65 at 1600 if you said. I hope it posts .-.

Edit: 67C even. I'll probably try re-seating everything up there when i feel like stripping it down again.

Edit2: 1.65V on DRAM, but still no POST. i put it back to 1,55.

ypoora1 · Apr 1, 2014

ypoora1 said:
Well, disabling the AMD turbo core seems to have dropped me to 68/69 with the 4.5 OC. i'll try giving the ram 1,65 at 1600 if you said. I hope it posts .-.

Edit: 67C even. I'll probably try re-seating everything up there when i feel like stripping it down again.

Edit2: 1.65V on DRAM, but still no POST. i put it back to 1,55.

Got it stable. ram @ 1333, CPU @ 4,5. good enough for now.

Johan45 · Apr 5, 2014

@YautjaLord
Just wanted to show you what that CHV_z is capable of did a FSB run today to see how high I could get validated at 380 http://valid.canardpc.com/w5wypt

suraswami · Apr 5, 2014

Johan45 said:
@YautjaLord
Just wanted to show you what that CHV_z is capable of did a FSB run today to see how high I could get validated at 380 http://valid.canardpc.com/w5wypt
View attachment 55945

nice!

GLD · Apr 5, 2014

IDK if this has been posted before, but it's a pdf from AMD about overclocking the FX chips:
http://www.google.com/url?sa=t&rct=...l_fHibDCZpxkECOgm_5wS9g&bvm=bv.64125504,d.aWc

YautjaLord · Apr 8, 2014

Johan45 said:
@YautjaLord
Just wanted to show you what that CHV_z is capable of did a FSB run today to see how high I could get validated at 380 http://valid.canardpc.com/w5wypt
View attachment 55945

I have "mere" 8350, it runs 4.0GHz default FFS!!! :laugh:

BTW: DL'd the 9590's BIOS (1403) last night, all i need now is that TridentX 2400MHz RAM & hope that i won't get any errors on that sh*t Q-Code LED thing. 4.5GHz, that's all i'm asking for now: air, AIR cooling Johan45, NOT LCS, remember? lol You can see what cools my CPU & stuff in my sys specs. I do hope that i'll atleast be able to reach 5.0GHz with Swiftech's H2O-220 Elite once i'll get my hands on this thing. Beastly mobo, CPU & RAM combo, regardless. Cheers man.

psyko12 · Apr 8, 2014

@Johan45 : Got those sweet Ripjaws X you pointed out

they're the 1866mhz ones with 9-10-9-28. And got me a sweet 1tb Black

atm my oc is via multi set at 200 (bclk) x 21 to be at turbo boost speeds 4.2ghz, the summer heat here is the limiting factor, we are hitting 38c daytime !!

so I can't push it much atm.

Working my way to an updated GPU and a Boot drive SSD (60-120gb[for a game or 2]).

Water cooling is the last option if I want to push harder, but atm I'm pretty much content on what my rig handles

snappy and overall reliable

P.S.

Gonna try a FSB(bclk) oc and see how high I can manage my system to be stable. Is it still possible to play with my RAM timings? I'm just running via XMP profile.

Thanks!

Johan45 · Apr 9, 2014

YautjaLord said:
I have "mere" 8350, it runs 4.0GHz default FFS!!!

BTW: DL'd the 9590's BIOS (1403) last night, all i need now is that TridentX 2400MHz RAM & hope that i won't get any errors on that sh*t Q-Code LED thing. 4.5GHz, that's all i'm asking for now: air, AIR cooling Johan45, NOT LCS, remember? lol You can see what cools my CPU & stuff in my sys specs. I do hope that i'll atleast be able to reach 5.0GHz with Swiftech's H2O-220 Elite once i'll get my hands on this thing. Beastly mobo, CPU & RAM combo, regardless. Cheers man.

I do realize that Yautja, just wanted to show you what that Fancy board of yours can do. 4.5 is a decent clock on air. I wasn't pushing too hard to do that, I realize I had 1.6+v in it but there wasn't really a lot of heat since there was no stress testing. I wanted to see how high I could get it since on the Bot I have seen 400+ with LN2 so to me 380 wasn't bad considering it's just water.

psyko12 said:
@Johan45 : Got those sweet Ripjaws X you pointed out they're the 1866mhz ones with 9-10-9-28. And got me a sweet 1tb Black

atm my oc is via multi set at 200 (bclk) x 21 to be at turbo boost speeds 4.2ghz, the summer heat here is the limiting factor, we are hitting 38c daytime !! so I can't push it much atm.

Working my way to an updated GPU and a Boot drive SSD (60-120gb[for a game or 2]).

Water cooling is the last option if I want to push harder, but atm I'm pretty much content on what my rig handles snappy and overall reliable

P.S.

Gonna try a FSB(bclk) oc and see how high I can manage my system to be stable. Is it still possible to play with my RAM timings? I'm just running via XMP profile.

Thanks!

Yes it's possible to OC the ram a bit and keep a stable OC. The best way I have found to play with RAM in windows is with AMD OD. The only thing you can't change is the CL but all others are possible. Just drop one at a time and test with Aida64 to get an idea of performance/stability. When done you should do a real stability test. Tightening the ram can be harder on the IMC so added voltage may be necessary to the CPU or CPU_NB. Also your ram will be fine day to day with 1.7v if you need that extra little bit.

YautjaLord · Apr 10, 2014

TridentX was nowhere around in the store, so i went for 2x4GB DDR3 1600MHz RipjawsX - can't be any f***in' happier: check my sys specs i have the new components up & running. lol Once i slap in 8350 i'll make sure to check out if the RAMs run @ the 1866MHz frequency & other awesome sh*t.

P.S. No need for BIOS update Johan45 BTW: once i got into it i saw it's version 1602. Have anything [good or bad] to say about this BIOS version? I know it's above the FX-9590's version (1402).

P.P.S. Nevermind, got 8350 installed & working: no hiccup whatsoever.

I think i'll stick with that BIOS version: soon will also set RAM to 1866MHz/1.65v. Where's the XMP option in that BIOS though?

Mocsin Jade Piang · Apr 11, 2014

FX 8350
Gigabyte 990FXA UD3 Rev. 4
Close Side Panel
2x120mm 1650rpm Top
2x120mm 2700rpm Front
*CPU - 23c Idle (FX8350 w/H80i Push Fan Only)
*GPU - 36c Idle (Asus GTX660ti DirectCUII Top)
*CPU - 48c Full Load (FX8350 w/H80i Push Fan Only)
*GPU - 74c Full Load (Asus GTX660ti DirectCUII Top)
Can I OC my PC with this current Temp. or maybe I need some cooling to do??

psyko12 · Apr 11, 2014

Johan45 said:
Yes it's possible to OC the ram a bit and keep a stable OC. The best way I have found to play with RAM in windows is with AMD OD. The only thing you can't change is the CL but all others are possible. Just drop one at a time and test with Aida64 to get an idea of performance/stability. When done you should do a real stability test. Tightening the ram can be harder on the IMC so added voltage may be necessary to the CPU or CPU_NB. Also your ram will be fine day to day with 1.7v if you need that extra little bit.

Thanks ! Can't wait for the weekend to play around with the ram and cpu oc..

YautjaLord · Apr 11, 2014

4.1GHz/1.4v. That's highest for VenomousX & AS5 with this CPU; i bet there's not enough TIM have been applied by me either. I stuck with stock clock til H2O-220 Elite is in this rig. Pic:

See the highlighted temp? This is what i call f***ed up. Any suggestions what to fiddle with in BIOS's Extreme Tweaker or how's that sh*t called? What is VDDR & how high/low/etc.... to set it, NB HT voltage, SB voltage, etc...... I'll post the pics of this stuff here, will it suffice? CPU ratio was 20.5, CPU frequency - 200, PCIE - 100, CPU voltage - 1.4v, CPU/NB freq - 2400MHz, HT Link - 2200MHz, VDDA - 2.6000volts, DRAM - 1.5v/1600MHz.

m0nt3 · Apr 12, 2014

http://valid.x86.fr/xljj74

30min of Prime95 thus far. The temp in the CPU-Z link is my Prime95 temp, not bad for an H60

ThE_MaD_ShOt · Apr 12, 2014

One day i'll actually try to overclock it lol didn't even push to get it here.

Bones · Apr 12, 2014

Did this about two weeks ago and I have plans to do more with it when I can.

System Name	Helios
Processor	AMD Ryzen 5 2600 @ 4.0
Motherboard	MSI X470 Gaming Pro Carbon
Cooling	Corsair iCUE H150i RGB Pro XT
Memory	16GB Corsair Vengeance Pro RGB DDR4-3200
Video Card(s)	Gigabyte Geforce GTX 1080 G1 Gaming
Storage	256GB Hynix Pc401 & 3TB of HDD storage
Display(s)	AOC CU34G2X + 2x Iiyama E2483HS
Case	In-Win 303
Audio Device(s)	Teufel Concept C 200 USB & Schiit Fulla 2 w/ Beyerdynamic DT 990 Pro 250Ohm
Power Supply	Corsair RM1000
Mouse	Logitech G502 Proteus Spectrum
Keyboard	Logitech G512
Software	Windows 10

System Name	Gamer/ HTPC
Processor	AMD Ryzen 5 2600
Motherboard	ROG Crosshair VI
Cooling	Alphacool Eisbaer 420 AIO
Memory	G.Skill TridentZ RGB 2x8GB 3333 CL14
Video Card(s)	Gigabyte Aorus RX 580
Storage	Corsair Neutron 480 GB
Display(s)	Samsung 42" 1080p
Case	Phanteks Enthoo Luxe Tempered Glass
Power Supply	Corsair 750
Software	Win10 Pro
Benchmark Scores	http://hwbot.org/user/johan45/

System Name	Black Prometheus
Processor	\|AMD Ryzen 7 1700
Motherboard	ASRock B550M Pro4\|MSI X370 Gaming PLUS
Cooling	Thermalright PA120 SE \| AMD Stock Cooler
Memory	G.Skill 64GB(2x32GB) 3200MHz \| 32GB(4x8GB) DDR4
Video Card(s)	ASUS DirectCU II R9 290 4GB
Storage	Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s)	LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case	DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s)	LG Dolby Atmos 5.1
Power Supply	Corsair RMX850 Fully Modular\| EVGA 750W G2
Mouse	Logitech Trackman
Keyboard	Logitech K350
Software	Windows 10 EDU x64

System Name	Helios
Processor	AMD Ryzen 5 2600 @ 4.0
Motherboard	MSI X470 Gaming Pro Carbon
Cooling	Corsair iCUE H150i RGB Pro XT
Memory	16GB Corsair Vengeance Pro RGB DDR4-3200
Video Card(s)	Gigabyte Geforce GTX 1080 G1 Gaming
Storage	256GB Hynix Pc401 & 3TB of HDD storage
Display(s)	AOC CU34G2X + 2x Iiyama E2483HS
Case	In-Win 303
Audio Device(s)	Teufel Concept C 200 USB & Schiit Fulla 2 w/ Beyerdynamic DT 990 Pro 250Ohm
Power Supply	Corsair RM1000
Mouse	Logitech G502 Proteus Spectrum
Keyboard	Logitech G512
Software	Windows 10

System Name	TOO MUCH RADIATOR! \| The TV Box a.k.a. The Shoebox
Processor	Core i7 4930K @ 4.5GHz \| Core i5 6600K @ 4.5GHz
Motherboard	Asus X79 Rampage IV Extreme \| Asus Z170i Pro Gaming
Cooling	Custom water on CPU and GPU, dual 360mm radiators \| Corsair H80i
Memory	4x 8GB G.Skill TridentX DDR3-1600 \| 2x 4GB G.Skill RipJaws 4 DDR4-3000
Video Card(s)	Sapphire AMD R9 295x2 \| PowerColor AMD HD7970
Storage	Samsung SSD 830 256GB, various others \| 2x 1TB Seagate Barracudas in RAID1
Display(s)	Dell U2713HM 2560x1440 IPS \| Panasonic TC-L32E5 1080p IPS TV
Case	Thermaltake Suppressor F51 (stripped down to hold two radiators) \| Cooler Master Elite 130
Audio Device(s)	RM-DAC -> Xiang Sheng 708b -> Sennheiser HD650 \| HDMI sound device on 7970
Power Supply	LEPA G1600-MA 1600W \| Corsair CX750M 750W
Software	Win 10 64
Benchmark Scores	over 9000 BungholioMarks, "Bitchin' Fast"

AMD FX OC'ers Club

ypoora1

Johan45

Durvelle27

Moderator

ypoora1

Random Murderer

The Anti-Midas

ypoora1

ypoora1

Random Murderer

The Anti-Midas

ypoora1

Johan45

ypoora1

ypoora1

Johan45

suraswami

GLD

YautjaLord

psyko12

Johan45

YautjaLord

Mocsin Jade Piang

New Member

psyko12

YautjaLord

m0nt3

ThE_MaD_ShOt

Bones

System Name	---
Processor	FX 8350 @ 4.00 Ghz with 1.28v
Motherboard	Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling	Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory	Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s)	Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage	Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s)	3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case	AeroCool XPredator X3
Audio Device(s)	Built-in Realtek
Power Supply	Corsair HX1000 Modular
Software	Windows 10 Pro 64 bit

Processor	AMD Ryzen 7 5700X, AMD Wraith Prism.
Motherboard	ASUS TUF X570-Plus (Wi-Fi).
Cooling	Antec 120mm RGB case fans.
Memory	4x8gb, G.SKILL F4-3600C16D-16GVKC.
Video Card(s)	Sapphire Pulse RX 6700.
Storage	PNY XLR8 CS3040 2TB 4.0x4 NVMe ssd with Vantec ICEBERQ heat sink.
Display(s)	ASUS VP278QG 27", 1080p, 75hz, FreeSync.
Case	Antec GX202.
Audio Device(s)	Onboard sound, Logitech Z625 THX 2.1's, Logitech G430 headphones.
Power Supply	Seasonic Prime GX-750.
Mouse	Logitech G203 Prodigy.
Keyboard	Logitech G213.
Software	Windows 11 Pro, @ Day 1.

System Name	Zangief (Reborn)
Processor	AMD Ryzen R7 1700X @ 3.825ghz , 1.35v
Motherboard	Gigabyte GA-AX370 Gaming K7 Rev 1.0 BIOS F51e
Cooling	Noctua NH-D15 Push / Push Config \| 2x ML120 \| 2x Phanteks 120 mm
Memory	2x8GB G.Skill Trident Z @ 3200mhz cl 16 @ 1.45v
Video Card(s)	Gigabyte Aorus GTX 1080 +100 core / +550 mem
Storage	250 GB Samsung Evo 850 / 1tb WD Black / 4tb WD Blue / 512GB Adata XPG Pro SX8200
Display(s)	Acer Predator XB271HU \|Asus VX239H 23" AH-IPS Led
Case	Phanteks Enthoo Pro M TG
Audio Device(s)	On Board Realtek HD / Logitech G633/G933 Gaming Headset / Corsair H70 Pro Wireless
Power Supply	Corsair HX750i
Mouse	Logitech G903 and G602 Wireless Gaming \| Logitech Proteus Core G502
Keyboard	Corsair K70 Cherry Red \| Corsair K70 RGB MK.2 Cherry Browns \| Akko 3908N TTC Flame Reds
Software	Windows 11 Pro

System Name	Headshot
Processor	AMD Ryzen 7 3800X
Motherboard	ASUS Crosshair VI Hero ROG
Cooling	Phanteks Glacier One 360 MPH
Memory	2x16GB Corsair Vengence LPX DDR4 @ 3200 16-18-18-18-36
Video Card(s)	AMD Radeon Vega64 (Linux)/Gigabyte RX 6600 (Windows VM)
Storage	Cruscial P5 1TB nVME, Samsung 850 EVO 250GB, Seagate 1TBx2 (Home/Data), 2TB Seagate (Games)
Display(s)	2x Acer 1080P 144HZ
Case	Phanteks Enthoo Luxe White
Audio Device(s)	Schiit Stack (Schiit Audio Modi 2 DAC + Magni 3 AMP + Loki)
Power Supply	eVGA Supernova 1000 G2
Mouse	Razer DeathAdder V2
Keyboard	Logitech G710+
Software	Arch Linux with Windows 10 Gaming VM

System Name	Agent Texas / Selene / Eve
Processor	Ryzen7 5800x / Fx 8350 / Fx 8350
Motherboard	Gigabyte B550 Aorus Elite Ax V2 / Gigabyte 990FXA-UD3 r4.0 / Msi 970a Krait
Cooling	Msi Mag Core liquid / H100i / Cryo-pc Cooler
Memory	2 x32 GB Gskil Ripjaws v series / 4x 8gb G.Skill Snipers / 2x 8gb G.Skill Ripjaws
Video Card(s)	Gigabyte Rx 6800xt / Msi RX580 / Gigabyte R9 290x
Storage	1tb M.2, 2tb wd / 500 gb ssd, 2x 2tb Wd Blacks/ 500 gb ssd, 1tb WD Black
Display(s)	Dell Ultra Sharp 2408 WFp / Hp w2207 / Sanyo tv
Case	Corsair 780t White / Raidmax Vampire / NZXT Phantom 240
Audio Device(s)	Onboard Hd Audio / Onboard Hd Audio / Onboard Hd Audio
Power Supply	Corsair Rm 850 watt / Corsair TX 850 watt / Corsair TX 750 watt
Mouse	Logitech G502 Hero / Logitech G500s / Logitech wireless
Keyboard	Corsair Strafe / Corsair k50 / Logitech wireless
Software	Win 11 pro / Win 11 pro / Win 11 pro
Benchmark Scores	What are benchmarks anyway?

Processor	Ryzen 2600
Motherboard	X470 Tachi Ultimate
Cooling	AM3+ Wraith CPU cooler
Memory	C.R.S.
Video Card(s)	GTX 970
Software	Linux Peppermint 10
Benchmark Scores	Never high enough

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2