- Joined
- Oct 21, 2005
- Messages
- 7,062 (1.01/day)
- Location
- USA
System Name | Computer of Theseus |
---|---|
Processor | Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset) |
Motherboard | EVGA Z690 Classified |
Cooling | Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active |
Memory | G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK |
Video Card(s) | ASUS PROART RTX 4070 Ti-Super OC 16GB, 2670MHz, 0.93V |
Storage | 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data), ASUS BW-16D1HT (BluRay) |
Display(s) | Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms. |
Case | Lian Li O11 Air Mini |
Audio Device(s) | Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer |
Power Supply | Super Flower Leadex Platinum SE 1000W 80+ Platinum White, MODDIY 12VHPWR Cable |
Mouse | Zowie EC3-C |
Keyboard | Vortex Multix 87 Winter TKL (Gateron G Pro Yellow) |
Software | Win 10 LTSC 21H2 |
Thats a great idea. Too bad I chucked my big pile of Nissan engine junk lol. If you can take a photo of it that would be great. A PVC pipe cap (not conductive) fitted onto the valve's stem with a washer and spring on the bottom of it would be a nice way to push upwards too.Unfortunately both are in short supply. I used to use an old exhaust valve from my Chrysler small block - similar to this
Depending on the spring length/tension you use and which groove the lock sits in (or machine in another to suit) they are remarkably stable. I just used a large diameter washer on top of the spring retainer - the edge of which then sat under the bottom edge of a set of waterblocked GTX 280's to support them. Basically a sturdier, better looking version of this
Last edited: