* F@H Tech Assistance Thread *

mx500torid · May 15, 2014

is the gpu overclocked?

stinger608 · May 15, 2014

thebluebumblebee said:
Delete the WU by deleting the work folder (I'm off to find where that is. I haven't had to delete a WU in forever)

Well now actually it seems to have started back up after rebooting the computer. It was at the 99.99% until I paused then it would show 85%. Now with it running it is showing at 89.57% and counting. The GPU is also under full load at 52C. I am running a Arctic Cooling Twin Turbo so the GPU stays pretty cool.
But yea, with it running it is showing right now at 89.81%

So I think all is good now.

stinger608 · May 15, 2014

mx500torid said:
is the gpu overclocked?

Not at all.

thebluebumblebee · May 15, 2014

stinger608 said:
Well now actually it seems to have started back up after rebooting the computer. It was at the 99.99% until I paused then it would show 85%. Now with it running it is showing at 89.57% and counting. The GPU is also under full load at 52C. I am running a Arctic Cooling Twin Turbo so the GPU stays pretty cool.
But yea, with it running it is showing right now at 89.81%

So I think all is good now.

One of the things that I do is to check the log and compare the time of the last entry to the time listed in the lower right hand corner of the client. I had a WU freeze a few weeks ago and neither FAH or HFM indicated that something was wrong.
:oops:

Shame on me for not recommending a client and/or system reboot!

Norton · May 15, 2014

thebluebumblebee said:
Delete the WU by deleting the work folder (I'm off to find where that is. I haven't had to delete a WU in forever)

I usually delete the slot, reboot, and setup the slot(s) again... not sure if that's the best way but it seems to work for me?

I think I've gotten 2 of these stuck jobs in the past couple of months.

stinger608 · May 15, 2014

Yep all is good. It finished it an uploaded the work unit completion. :peace:

hertz9753 · May 16, 2014

The Stanford 7.4.4 client has a Finish button. I clicked on it thinking the wu would upload when it was done. It uploaded when I clicked. I did some points though.

GTX 660 Ti running @ 1149 with the advanced flag on 7.4.4

Overclocker_2001 · Jul 20, 2014

today my second rig [e7300 + 4GB ddr2 + msi p31 + antec eco 380W + nvia gts240 + kingston v300 + W7 32bit {PAE enabled}] can't recive WU from server (empty work server)
discontinued support for 8800 series? or only some problem at stanford?

thebluebumblebee · Jul 20, 2014

There's a problem with the servers:
https://foldingforum.org/viewtopic.php?f=18&t=26481

Overclocker_2001 · Aug 17, 2014

removed f@h from gts240 system because after 2 weeks no WU found :/
i'll fold only with gtx460 now

hertz9753 · Aug 18, 2014

Overclocker_2001 said:
removed f@h from gts240 system because after 2 weeks no WU found :/
i'll fold only with gtx460 now

Did you have any flags running

THE_EVIL_RAPIER · Aug 23, 2014

hey guys just started folding again today and have a quick question.

Looking through the log on the viewer, It says "Changed SMP threads from 2 to 3 this can cause some work units to fail"
Is this something I did while playing? Should I worry about it?

hertz9753 · Aug 23, 2014

THE_EVIL_RAPIER said:
hey guys just started folding again today and have a quick question.

Looking through the log on the viewer, It says "Changed SMP threads from 2 to 3 this can cause some work units to fail"
Is this something I did while playing? Should I worry about it?

Which client are you using?

THE_EVIL_RAPIER · Aug 23, 2014

hertz9753 said:
Which client are you using?

7.4.4 Sorry I was at work.

Latest Windows client. Last time I was folding you needed 2 clients, one for cpu and one for gpu.
This client appears to run both at the same time which is pretty nice.

LaytonJnr · Aug 25, 2014

Is it normal for a WU to hang at 99.9% for over an hour without it completing?

Layton

mstenholm · Aug 25, 2014

LaytonJnr said:
Is it normal for a WU to hang at 99.9% for over an hour without it completing?

Layton

Yes if it's crashed. Look in the log and see how far you actually got. Stop and start the folding and it will pick up at last good check point. You might need to re-start the PC for that to work

hertz9753 · Aug 25, 2014

LaytonJnr said:
Is it normal for a WU to hang at 99.9% for over an hour without it completing?

Layton

Shut down your folding client and restart it. If that doesn't work, shut the client down and restart you computer. It's not normal for a wu to hang.

LaytonJnr · Aug 25, 2014

mstenholm said:
Yes if it's crashed. Look in the log and see how far you actually got. Stop and start the folding and it will pick up at last good check point. You might need to re-start the PC for that to work

hertz9753 said:
Shut down your folding client and restart it. If that doesn't work, shut the client down and restart you computer. It's not normal for a wu to hang.

It seemed to have got to 92.0% (although restarting my PC means I can't check again because the log was cleared). I just restarted both the client and my PC, but it still seems to be hanging at 99.9%. I'll try a second time.

Layton

mstenholm · Aug 25, 2014

LaytonJnr said:
It seemed to have got to 92.0% (although restarting my PC means I can't check again because the log was cleared). I just restarted both the client and my PC, but it still seems to be hanging at 99.9%. I'll try a second time.

Layton

Give it a little time to find the check point.

LaytonJnr · Aug 25, 2014

mstenholm said:
Give it a little time to find the check point.

It found the checkpoint eventually. Thanks guys :toast:

Layton

thebluebumblebee · Aug 25, 2014

LaytonJnr said:
It found the checkpoint eventually. Thanks guys

Layton

I would suggest that you don't run F@H on your CPU. Very poor points/watt on AMD CPU's. You could run WCG, just make sure that the GPU has one CPU thread to its self. (true even with Folding on both CPU and GPU)

Overclocker_2001 · Aug 27, 2014

hertz9753 said:
Did you have any flags running

only thread-linked (don't remember exactly what is the flag) and only gpu slot (with passphrase)
tried all type of disease, with standard, advanced and beta wu, nothing, anyway, i can fold only twice a month (0.25€ per kWh and underpayed work :/ )

THE_EVIL_RAPIER · Aug 30, 2014

Hey guys,
Been folding for a few days now and everything seems to be going great however.... lol

My temps for my CPU have always hovered around 45c to 55c and my GPU 60c. I think I saw it hit 61c once.
Anyway today my GPU temps jumped to 67c while folding. Do different WU's cause different loads? So far it sits at around 95% to 100% so there doesn't seem to be an increase of load.
My CPU temps are still the same. Any reason you guys can think of for such a large instant jump in temps?

Norton · Aug 30, 2014

Folding works a gpu fairly hard- you can try increasing your fan speed a bit if temps run higher than you're comfortable with.

*note- a 6C increase is probably nothing to worry about

THE_EVIL_RAPIER · Aug 30, 2014

Norton said:
Folding works a gpu fairly hard- you can try increasing your fan speed a bit if temps run higher than you're comfortable with.

*note- a 6C increase is probably nothing to worry about

Thank you. I'm not worried about the temp at the moment. I think it's fairly cool for folding. ( Don't know though ).
I was just wondering if the Temp jump was normal for folding or if something was starting to fail on my card.
I don't want to leave my card folding all night and fry it. I REALLY can't afford to buy another card anywhere near as powerful as this one. It took me a while to get the money together for this. lol

On a side note. I have to leave for work in ten mins. Night shift. I'd normally leave it running all night. If I don't reply I will tomorrow.

System Name	Mine, spare gamer, comp,
Processor	5800x, 5800x. 3600,
Motherboard	Gigabyte X570 Elite wifi, Gigabyte B550m wifi, Asus x570 Gaming wifi
Cooling	Ventoo V5, Coolermaster 240 mm AIO, Ventoo V5
Memory	32 GB 3600 ddr4, 32 GB 3600 ddr4, 16 GB 3200 ddr4
Video Card(s)	6800 XT reference, MSI Gaming Z 6800XT, EVGA RTX 2080,
Storage	2- 1TB 2280, Samsung 500 GB 980,
Display(s)	2-TCL 43 inch 4k, , 27 Inch Dell 1920x1080,
Case	2-Antec 280, Matrexx 50
Audio Device(s)	Bluetooth output to Sony STR-DH190 into Sony SS-CS5 speakers, same, onboard, same
Power Supply	Thermaltake 1350 , Seasonic 650 Watt Platinum, Deepcool 750 Watt Gold
Mouse	Corsair, Sentinel Advance, Zio Levetron, CMStorm, Transformer
Keyboard	G15, , CMStorm, G15
Software	Win 10, Zorin

System Name	Dean Machine/2020 Ryzenfall
Processor	Intel 4790K/AMD Ryzen 5800X
Motherboard	MSI 1150 Gaming mATX/Asus ROG STRIX B550-F Gaming Wifi
Cooling	Cooler Master Hyper 212 LED/SilverStone AH240 AIO
Memory	16 gigs Crucial Ballistix Tactical Tracer/32 gigs G.Skill TridentZ NEO DDR4
Video Card(s)	Gigabyte 1660 Super/EVGA GTX 1080 FTW Hybrid Gaming
Storage	Crucial SSD 256 and 2TB spinner/Dual Samsung 980 Pro M2 NVME 4.0
Display(s)	Overlord 27" 2560 x 1440
Case	Corsair Air 540
Audio Device(s)	On board
Power Supply	Seasonic modular 850 watt Platinum/EVGA T2-850 Titanium
Software	Windows 10 Pro/Windows 10 Pro

System Name	Dean Machine/2020 Ryzenfall
Processor	Intel 4790K/AMD Ryzen 5800X
Motherboard	MSI 1150 Gaming mATX/Asus ROG STRIX B550-F Gaming Wifi
Cooling	Cooler Master Hyper 212 LED/SilverStone AH240 AIO
Memory	16 gigs Crucial Ballistix Tactical Tracer/32 gigs G.Skill TridentZ NEO DDR4
Video Card(s)	Gigabyte 1660 Super/EVGA GTX 1080 FTW Hybrid Gaming
Storage	Crucial SSD 256 and 2TB spinner/Dual Samsung 980 Pro M2 NVME 4.0
Display(s)	Overlord 27" 2560 x 1440
Case	Corsair Air 540
Audio Device(s)	On board
Power Supply	Seasonic modular 850 watt Platinum/EVGA T2-850 Titanium
Software	Windows 10 Pro/Windows 10 Pro

System Name	Main/DC
Processor	i7-3770K/i7-2600K
Motherboard	MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling	Phanteks PH-TC14CS/H80
Memory	Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s)	Asus GTX 660 Ti/MSI HD7770
Storage	Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s)	Asus 24' LED/Samsung SyncMaster B1940
Case	P100/Antec P280 It's huge!
Audio Device(s)	on board
Power Supply	SeaSonic SS-660XP2/Seasonic SS-760XP2
Software	Win 7 Home Premiun 64 Bit

System Name	Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor	Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard	Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling	Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory	2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s)	MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage	Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s)	Main PC (2x24" Dell UltraSharp U2414H)
Case	Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s)	Logitech Z625 THX 2.1 speakers
Power Supply	EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse	G300s
Keyboard	Corsair K65
VR HMD	N/A
Software	Windows 10 Pro or Ubuntu
Benchmark Scores	Why sit on the Bench when you can get in the game and Crunch!!!

* F@H Tech Assistance Thread *

mx500torid

stinger608

Dedicated TPU Cruncher & Folder

stinger608

Dedicated TPU Cruncher & Folder

thebluebumblebee

Norton

Moderator - Returning from the Darkness

stinger608

Dedicated TPU Cruncher & Folder

hertz9753

Attachments

Overclocker_2001

thebluebumblebee

Overclocker_2001

hertz9753

THE_EVIL_RAPIER

hertz9753

THE_EVIL_RAPIER

LaytonJnr

mstenholm

hertz9753

LaytonJnr

mstenholm

LaytonJnr

thebluebumblebee

Overclocker_2001

THE_EVIL_RAPIER

Norton

Moderator - Returning from the Darkness

THE_EVIL_RAPIER

System Name	Fuzzy Bunny
Processor	Intel i7 3770K
Motherboard	ASRock Z77 Extreme4
Cooling	Arctic Freezer 7 Pro Rev 2
Memory	16GB Mushkin 2133
Video Card(s)	NVIDIA GTX 980 Ti-Kraken G10
Storage	Western Digital Caviar Black WD7501AALS 750GB
Display(s)	ASUS 24"
Case	Antec 300
Audio Device(s)	Stock
Power Supply	CoolerMaster Gold 1000 Watt
Software	Windows 7 64

System Name	anime_server//home_pc//rufy_pc//htpc//film_server
Processor	EQ8300@3.03/E7200@3.16/E8400@3.06/E5300@2.93/J1900
Motherboard	Asus P5Q-DLX/MSI G31M3-L V2/GA-G41M-ES2L/AsRock Conroe1333-D667/AsRock Q1900-ITX
Cooling	CM Hyper48+Vantec Tornado/stock/Asus Triton/stock/stock
Memory	22G PI8000+21G Extreme800+/22G PC2-6400/12G+1512M PC2-6400/21G Kingston PC2-6400/2*4G so-DDR3
Video Card(s)	Palit GTX460 1GB w EK Supreme/GTS240 1GB/Asus HD4550 512MB/Asus 7200GS 128MB/iHD
Storage	too many in too many config
Display(s)	Asus VS239--BenQ G922HDL--Philips 191V--Panasonic TX-40CS620--BenQ 2220HDL
Case	Chieftec super towa--Nokia Style--TechSolo TC-020--Lenovo Case--NXT one
Audio Device(s)	Creative Audigy!--onboard--onboard--onboard--onboard
Power Supply	Corsair TX850 w Aerocool fan--Antec EA380--FSP-300-60GHS--crappy one--LC-Power LC7300
Software	W7Pro x64--W8.1Pro--W7Pro x64--W7Pro--Win server 2012r2
Benchmark Scores	need more GB, more GPU and more CPU.. at least can share all with my rig

System Name	Main PC
Processor	Intel Core I5 4670K (Stock)
Motherboard	ASUS Maximus VI hero
Cooling	1x 200mm Front In / 4x120mm Side 2x In 2x Out / H100i Cpu Roof 2x 120mm Out / 1x 120mm Rear Out
Memory	16Gb Corsair Veng 1866 DDR3
Video Card(s)	EVGA Nvidia GTX780 SC w ACX cooler (Stock)
Storage	1x Corsair Force GT 240Gb SSD / 1x WD caviar black 1Tb
Display(s)	ASUS VG248QE 144Hz 1080p 3D
Case	Corsair 600T Graphite
Audio Device(s)	Realtek On Board
Power Supply	EVGA 1000W P2
Mouse	Corsair M65
Keyboard	Corsair K70
Software	Win 7 Pro 64bit

System Name	Daedalus
Processor	AMD FX 6300
Motherboard	ASUS M5A97 EVO R2.0
Cooling	Coolermaster Hyper 212 EVO
Memory	8GB Kingston HyperX Genesis (2x4GB)
Video Card(s)	MSI R9 270X Gaming 2GB
Storage	1TB Seagate Barracuda
Display(s)	LG Flatron E2442 (main - 24in 1080p)
Case	NZXT Phantom 410 (Gunmetal Edition)
Power Supply	XFX Pro 650W
Mouse	Steelseries Siberia [RAW]

System Name	The work PC /2700x/5950x
Processor	3900X stock/ 2700x stock/ 5950x 4200 MHz fixed @ 1,056-1,08V
Motherboard	Gigabyte AORUS Master X570/2xMSI X470 M7 AC
Cooling	Custom WC XSPC RX480, Laing DDC, XSPC Laing DDC Top V3 and EK Velocity/NH15/NH-U12S SE
Memory	32 GB Viper 3600/14 /16 GB Trident Z F4-4000C18D-16GTZSW 3600 /32 GB G Skill Flare CL14 3400
Video Card(s)	2070 Super X MSI/GTX 970 MSI/ GTX 970 MSI
Storage	1 TB SSD+500 GB NVMe / 500 GB SSD/ 2 TB 990 Pro
Display(s)	Dell UltraSharp U2518D/2408WFP
Case	Corsair 800D / Lian test bench/NZXT 500
Power Supply	AX 850 Titanium/AX 860i/AX 760
Software	Dual boot/Win 10 / Linux / Win 10+Linux

*** F@H Tech Assistance Thread ***

Dedicated TPU Cruncher & Folder

Dedicated TPU Cruncher & Folder

Moderator - Returning from the Darkness

Dedicated TPU Cruncher & Folder

Attachments

Moderator - Returning from the Darkness

* F@H Tech Assistance Thread *