• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

*** F@H Tech Assistance Thread ***

Norton said:
Give it at least an hour ;)

FYI- @T-Bob runs a 780 and a Titan so he may be able to assist with any setup questions you have.
Click to expand...
That is who I was trying to remember. You're the best @Norton. Yes. @T-Bob should have exactly what you need.
 
@T-Bob, that is who it is! God, I was thinking it was you @james888. Sorry for tagging ya on it bro.
 
I have a 780 and I'm folding on both CPU and GPU. My 780 sits anywhere from 92% to 97% load and my CPU usually has 3 cores running 95%+ and 1 sits around 75%.
It jumps around a little though. If you're still having problems I can take you through all my settings to see if they match up. Also if I remember rightly my first few Work Units didn't tax my GPU that hard.
I had to wait for maybe 5 or 10 WU's before I saw a proper load on it.
In the mean time you could try going back to that settings page and dedicating all your CPU cores except one and see if that makes any difference.
I'm brand new here myself but I'd gladly help if I can.
 
THE_EVIL_RAPIER said:
I have a 780 and I'm folding on both CPU and GPU. My 780 sits anywhere from 92% to 97% load and my CPU usually has 3 cores running 95%+ and 1 sits around 75%.
It jumps around a little though. If you're still having problems I can take you through all my settings to see if they match up. Also if I remember rightly my first few Work Units didn't tax my GPU that hard.
I had to wait for maybe 5 or 10 WU's before I saw a proper load on it.
In the mean time you could try going back to that settings page and dedicating all your CPU cores except one and see if that makes any difference.
I'm brand new here myself but I'd gladly help if I can.
Click to expand...

@THE_EVIL_RAPIER and @AthlonX2 I will be more than happy to assist.

I have a GTX780 Ti and a Titan both folding for @Kreij. I don't fold on my cpu's, I reserve them for WCG except 1core for the FAH client. I also have a HD7870 folding in my name and a HD7970 folding partime.

Anyway, evil's post above seems correct from my experience.:respect:
 
:oops: Been out of town, no Internet.
FYI: When F@H creates a new work unit, it goes through several steps before being turned loose to the general Folding community. There are steps before beta, but for the purpose of this post, the first step is beta, and they ask that you be willing to provide feedback if you set the beta flag. After that is advanced, which is where they put WU's that they think are ready, but are not quite sure. Then they are released to "full Folding". Sometimes a Folder can get more PPD by using those switches, but sometimes it's less. Beta worked for james888 recently because his 750 Ti needed the newest version of the Folding_core.
@AthlonX2 I can't see why you're seeing what you're seeing. See? Okay, are you doing something else with your CPU, like WCG? Having a dedicated core simply means that a core has to be available for the Folding client to use. What version of the Nvidia drivers are you using?
 
Hey guys, My production has dropped off a little (I'll let you loan 4th spot stinger) lol. I got home from work this morning and found this (see screenshot)

Anyway as you can see all my icons have gone tits. Clicking on them does nothing other than say it no longer exists do you want to remove it.
So... I figured something got messed up and a quick reinstall would fix. Went to uninstall and it said it already was....
All the while as you can see.. it's still running in the background (Monitors on the side show this) And my ears hear it.
I reinstall... And the same...
So I uninstall and this time it lets me and i reboot the machine... install and same again.
So I uninstall and delete everything F@H, Shutdown, Turn on, Reinstall, put info in and again... it's the same.
None of my icons work. But F@H is still running in the background. I just can't open the control center or anything on my machine.
Web control as you can see still works though.
If any of you guys know how to fix this I would appreciate it. lol
thanks.
 

Attachments

  • Capture013-20140906.jpg
    Capture013-20140906.jpg
    524.2 KB · Views: 301
If your gpu is overclocked you might wanna back off the clock a bit.
 
Nope. It's a stock EVGA GTX 780 Super clocked with acx cooler. I did OC it a while ago but to be honest it does what I need it to do stock so there's no point for me yet
 
I'd do a clean install of the video drivers.
 
A clean install of drivers didn't work. :ohwell: However.... an Express install on to the C; drive instead of a custom install to my S; drive seemed to fix it.

Thanks for the replies guys.
 
Hey guys sorry for another post, Does anyone have WCG and F@H both running on the same machine?
I have my 780 for F@H and my i5 does WCG.
I'm trying to get both to activate when my machine is idle. Trouble is if WCG activates then F@H never comes on because of it and vice versa.
This is my only machine and my wife uses it while I'm at work etc. I can't really have both programs running 24/7 while she's trying to use it.
Thank you for any help.
 
Set WCG to not run if using X amount of cpu. Your wife won't notice it because it will turn off if she is actually doing something. Have F@H run while idle. I was running it like this for a little while.
 
james888 said:
Set WCG to not run if using X amount of cpu. Your wife won't notice it because it will turn off if she is actually doing something. Have F@T-Bob

Just back in from night shift... Can you remember what % you had it set to? I tried 30 % and WCG shuts down when in use. Trouble is when it comes back on it then prevents F@H from ever leaving idle because the CPU is maxed out.
I just want both to run when I'm away at work and the PC is idle, But as soon as my wife starts to use it both programs idle and then come back up after she leaves it.
I've already tried increasing the folding core priority to higher but it had no effect.:confused:
@T-Bob you said you were running both would you know?
Click to expand...
 
@THE_EVIL_RAPIER change the processor setting to use one less core in your BOINC Manager (see below)

*for the i5 in your specs you would set it to 75(%)

BOINCprefcores.jpg


This will set aside a core for folding that will be utlized as needed ;)
 
Norton said:
@THE_EVIL_RAPIER change the processor setting to use one less core in your BOINC Manager (see below)

*for the i5 in your specs you would set it to 75(%)

BOINCprefcores.jpg


This will set aside a core for folding that will be utlized as needed ;)
Click to expand...

I tried that too. I don't know what % F@H considers "idle". But even keeping one core empty won't allow it to leave idle state. I left it running all last night, 3 cores for WCG and one idle for FAH.
WCG worked fine but F@H didn't do any work all night.
 
Run WCG but only use 3 cores and let the other core feed the 780 for folding. My wifes machine has a 770 and a 2500k. She has no problems doing whatever she wants unless its gaming it can get a little jerky. Make sure the slider for folding is set to full.
 
FYI: (from https://fah-web.stanford.edu/projects/FAHClient/wiki/FahControl)

Folding Power Panel
The slider has three settings and each one is described below:
Light -> Number of CPUs used for folding will be half of the total CPUs present in the system. GPU will not be folding even if it is supported. It is the default for laptops.
Medium -> Number of CPUs used for folding will be one less than the total CPUs present in the system (Please read Note 1). If supported GPUs are present, they will be configured to fold when the system is in idle state (Please read Note 2). It is the default for desktops.
Full -> Will use all CPUs present in the system for folding (Please read Note 1). GPU folding will start even if the system is in use.

Note 1: By default, if a GPU Slot is configured, one CPU is reserved per supported GPU. Thus, if you have 8 CPUs and 2 GPUs, your CPU Slot will use either 5 or 6 CPUs depending on the slider setting. This can be overridden by tweaking the settings in the CPU Slot.

Note 2: In Windows, if there’s no user input on the mouse or keyboard for a defined time period (varies on the system configuration), the FAH screensaver can activate, the power management settings can turn off the monitor, or Windows can decide that it’s in away mode, whichever comes first will be used as an idle trigger. In Mac OS X, the system is idle if there’s no user activity for around five minutes. In Linux, the screensaver and a lack of user input are used to determine idleness.
Click to expand...
 
Last edited:
THE_EVIL_RAPIER said:
I will try this tonight. I've had the power slider set to full the whole time. Hopefully medium setting will fix this. Thank you.

Ok WCG set to 75% core usage. 100% CPU time. Idle if usage exceeds 50%.
F@H deleted CPU client, GPU only, Power slider set to medium, Idle if in use.

Here's hoping. I'll let you know after tonights night shift.

Thanks for your help guys.
Click to expand...
We're all learning too. Thanks for communicating - you're helping the next person.....
 
Ok WCG set to 75% core usage. 100% CPU time. Idle if usage exceeds 50%.
F@H deleted CPU client, GPU only, Power slider set to medium, Idle if in use.

Sorry, I'm woking 7-12hr's out of town currently. @THE_EVIL_RAPIER if memory is correct my setup is just like your description above except I have "F@H slider set to Full"
 
T-Bob said:
Ok WCG set to 75% core usage. 100% CPU time. Idle if usage exceeds 50%.
F@H deleted CPU client, GPU only, Power slider set to medium, Idle if in use.

Sorry, I'm woking 7-12hr's out of town currently. @THE_EVIL_RAPIER if memory is correct my setup is just like your description above except I have "F@H slider set to Full"
Click to expand...

Nope these setting didn't work either. F@H did no work last night at all. @T-Bob I tried with the slider set to full the other night and it was the same for me.
WCG worked fine but then F@H wouldn't come out of idle.
The only way I can see around this at the moment is to tell WCG to only run during certain times like a 12 hour window. Leave F@H on idle.
When WCG shuts down for 12 hours then F@H should start up because the computer has entered an idle state.
Downside is I'm halving production for both. There must be a way to make both run at the same time when idle I just can't figure it out.
 
:oops:;) Not that ANY of us have EVER done anything like this, :laugh: but did you happen to pause the GPU slot and forget to un-pause it?
 
thebluebumblebee said:
:oops:;) Not that ANY of us have EVER done anything like this, :laugh: but did you happen to pause the GPU slot and forget to un-pause it?
Click to expand...

lol. I just checked......I had to after that. But no. still sitting on idle. :laugh:
 
Are you using web control or advanced control?
 
You must log in or register to reply here.
Back
Top