Unlocked Realtek HD Audio Drivers Windows 7 & 8 (With Dolby Digital Live and DTS Interactive)

[Pulstar]

Dolby® Advanced Audio/ Home Theater Drivers for your built-in HD Audio

http://forums.guru3d.com/showthread.php?t=392085

Thanks, but already the PCEE msi from there.. The Dolby app crashes frequently so I was wondering if there's an update on the driver level.

 

[Schmuckley]

It's on Guru3d..eh subbed for later

 

[doogie]

oh no my mobo has VIA2021 codec can you hack it too I know the driver can do dolby home theatre and dts connect on some motherboards

 

[HossHuge]

I used this program and it worked easily. It disables the driver signature enforcement during boot-up.

 

[saiyaniam]

Hi guys, I've been trying to sort this out a while now, I'm using win7, and have got to the point where I can't use 5.1 sound unless I stay in test mode. I do not wish to do this.
Is there no way to use 5.1 in normal mode? I have tried every combo I can based on the info in this topic, I've read it all.

Everything works If I stay in test mode. And nothing except analog connections are recognized if I go into normal mode.


Also for anyone reading this, the link that has been posted in this topic, this link here : http://forums.guru3d.com/showthread.php?t=392085

Does NOT let you use "Dolby Digital Live".

 

[Delphium]

I lost a few hours trying to get this working so I have compiled a pre-patched 2.73 install package with what should be infallible instructions.

http://www.sendspace.com/file/e5tmix

Tested with win 8.1

Having tried the alternative methods previously with varying results, this one is working very well for me.
Thanks for packaging everything together.

 

[saiyaniam]

Having tried the alternative methods previously with varying results, this one is working very well for me.
Thanks for packaging everything together.

Are you still running in test mode?

 

[x7007]

Hi,, why we can't use the newest Realtek version with the mod ? realtek_hda_7365 6.0.1.7365 , the 2.71 or any other version sometimes cause problems with enchanments and said there is a problem with one of them and can make slow performance and many more other problems with micrphone and such.

 

[Delphium]

Are you still running in test mode?

I am, however I intend to remove the watermark when i get round to it, too busy enjoying games in 5.1 via optical x]

 

[GeLork]

Far cry 4 but even with changes xaudio2 no sound.

 

[om604]

Far cry 4 but even with changes xaudio2 no sound.

mine works just perfect

 

[irishwhip]

I have this working on alc1150 (motherboard MSI z97 gaming 7)
I used the 2.71 installer from guru3d with the R2.71 M1 files from 2bads original post.
I enabled test mode with dseo13b, resigned the files with the same app then copied them into the installers folders.


5.1 directional sound confirmed with the windows sound control panel, and skyrim.
Many thanks, i now have threee less cables cluttering up the place.

 

[saiyaniam]

As far as I can tell everyone has to be in test mode for this to work. Can someone explain why that is?

 

[om604]

Because driver is not signed, and windows can't run unsigned drivers in "normal" mode

Should I update to 2.73?

 

[saiyaniam]

Because driver is not signed, and windows can't run unsigned drivers in "normal" mode

Should I update to 2.73?

Even with the driver signed it still doesn't run in normal mode

 

[nightrain50]

2bad you win the internet. Thanks.

 

[Henri1234lel]

I installed everything, running in test mode, with the ALC892.

In Realtek Digital Output (using a SPDIF optical cable), I selected the Dolby Digital Live (5.1 Surround).

My receiver says it's receiving DD or DTS accordingly.

However, whether I play music, a movie, or a game, the sound still only comes out of my two front speakers. Center speaker and the two back speakers are dead silent.

I don't understand why, or what I'm doing wrong. I also can't select the "speaker fill" option to copy the stereo audio to the back speakers, or enable DTS connect on my digital output because it asks for 5.1 speaker configuration and I can only do that on the laptop's speakers or for the headset (analogue) jack.

 

[Delphium]

Music unless up-scaled via the media player app of your choice will remain in stereo and only come out the front 2 speakers. This is how mine works and how I expect it to work.
Most music player programs tend to have an option or a 3rd party plugin that will allow you to upscale to 5.1.
Example, Winamp + Matrix Mixer output plugin.

Movies if they have multiple channels, should have SPDIF/Digital pass through mode, which would send the raw dts/dd signal of the movie to the speakers digital decoder.
Also be sure to select the correct audio track with movies as some have multiple audio channels for which the default may be the stereo channel.
If a movie is in Stereo then MPC-HCE has an internal filter audio switcher that allows you to again setup a speaker matrix to channels of your choice.

Games, some games require you select a 5.1 configuration while inside the game, others should auto detect from windows.

 

[Chaython]

- OS Windows 8/10 64bit
- Motherboard GA-Z97N-Wifi
- HD Audio Controller Hardware ID
- HD Audio Codec Hardware ID
HDAUDIO\FUNC_01&VEN_8086&DEV_2807&SUBSYS_80860101&REV_1000
HDAUDIO\FUNC_01&VEN_8086&DEV_2807&SUBSYS_80860101

All the enhancements etc appear, but none of them do anything. I've tried original and alternative methods

 

[erpguy53]

Unfortunately, usually Windows PUMA (Protected User Mode Audio) will check the digital signature of the user-mode DLL and will refuse to play ("Failed to play test tone"),
even so, PUMA will only re-verify the DLL signature after a system restart.

Hi. just recently registered here.
Worked around that by adding this important registry entry in Registry Editor:
Go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Audio"
add "DisableProtectedAudioDG" of DWORD (32bit value) type and set it to 1.
This will allow unsigned audio processing object [APO] DLL files to be used in Vista/7/8.

Very important step to do before installing any modded Realtek audio drivers. If for some reason that entry is not there in RegEdit, insert it there.

 

[Ruben Portier]

Hi. just recently registered here.
Worked around that by adding this important registry entry in Registry Editor:
Go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Audio"
add "DisableProtectedAudioDG" of DWORD (32bit value) type and set it to 1.
This will allow unsigned audio processing object [APO] DLL files to be used in Vista/7/8.

Very important step to do before installing any modded Realtek audio drivers. If for some reason that entry is not there in RegEdit, insert it there.

I am very sorry to say that this method does not work, for me. Could you please be a bit more specific?
What I did: I first did exactly as you told us: create the new DWORD (32-bit) key in the Windows register (using regedit). Then I installed the Realtek driver R 2.73 and replaced the file RTKVHD64.sys in C:/Windows/system32/drivers/ after installation and reboot.

After replacing that file and rebooting I still get the error where Windows does not load the driver because it is not signed (I need to be in testing mode). Your explanation does not work or I am doing something wrong. I would love to hear more about this because I hate the use of testing mode and the watermark.

Thanks!

 

[Laurijan]

I am very sorry to say that this method does not work, for me. Could you please be a bit more specific?
What I did: I first did exactly as you told us: create the new DWORD (32-bit) key in the Windows register (using regedit). Then I installed the Realtek driver R 2.73 and replaced the file RTKVHD64.sys in C:/Windows/system32/drivers/ after installation and reboot.

After replacing that file and rebooting I still get the error where Windows does not load the driver because it is not signed (I need to be in testing mode). Your explanation does not work or I am doing something wrong. I would love to hear more about this because I hate the use of testing mode and the watermark.

Thanks!

Press F8 while booting and select disable driver signature enforcement - hope that helps.

 

[Ruben Portier]

Press F8 while booting and select disable driver signature enforcement - hope that helps.

I am aware of this method but I don't want to use testing mode with driver signing disables.

 

[mago]

I have this mobo

http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dh55tc.html

It says it has this realtek codec

http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=28&Level=5&Conn=4&ProdID=141

Where it says it has s/pdif out output, although it doesn't have that yellow line out jack.

So far i didn't had luck with the cracked driver, still haven't tried test mode, but im wondering if i should keep trying since im not sure if its for my realtek. So, is this going to work for me?

and im thinking on buying this

http://www.amazon.com/dp/B0045JHJSS/?tag=tec06d-20


You think is a good idea?


Thanks guys.

 

[Delphium]

Hi, do you have a SPDIF output connected to your motherboards header?
According to pages 11-13 here - http://downloadmirror.intel.com/18505/eng/DH55TC_TechProdSpec.pdf

Once you have a header module connected then you should be able to use the 5.1 from the realtek.

As for the Xonar DG, I guess it depends what you have in mind use wise for the system, the DG does not support Dobly Digital Live or DTS live encoding which is required for playing games in 5.1, without this games will simply run in 2 channel stereo over digital output, try the Xonar DX for DD/DTS live encoding support

Movies however with a 5.1 encoded audio track can be passed out directly to a digital amp for proper 5.1 decoding.