Processor | Core i5 2500K @ 4,5 GHz |
---|---|
Motherboard | ASUS P8Z77-V LX |
Cooling | Watercooled CPU + GPU |
Memory | Kingston 8GB 1333 MHz CL8 |
Video Card(s) | Sapphire R9 290 |
Storage | SSD 128 GB OCZ Agility 3, 3TB WD30EURS, 3TB Seagate external |
Display(s) | HP ZR2440w |
Audio Device(s) | Asus Xonar Essence ST @ Sennheiser HD600 |
Power Supply | Cooler Master Silent Pro 850W |
Your score seems to be a bit too low. Make sure your card doesn't reduce the GPU frequency too much. I will set up my R9 290 to 1030/1400 MHz and will post my result in the evening, just to see the difference.Hello, I would like some advice, I installed a new video card, the "SAPPHIRE VAPOR-X R9 290 4GB GDDR5 TRI-X OC" testing to bench "Ungine Heaven 4.0" leaving it in default to "1030 MHz Core and 1400MHz ram" this is the result, in your opinion everything is normal ???
Processor | Core i5 2500K @ 4,5 GHz |
---|---|
Motherboard | ASUS P8Z77-V LX |
Cooling | Watercooled CPU + GPU |
Memory | Kingston 8GB 1333 MHz CL8 |
Video Card(s) | Sapphire R9 290 |
Storage | SSD 128 GB OCZ Agility 3, 3TB WD30EURS, 3TB Seagate external |
Display(s) | HP ZR2440w |
Audio Device(s) | Asus Xonar Essence ST @ Sennheiser HD600 |
Power Supply | Cooler Master Silent Pro 850W |
Simply run the benchmark once again with MSI Afterburner launched in background and check the GPU frequency for sudden drops afterwards. Increase power limit if necessary, check also GPU temps. Max. fps should normally be somewhere above 100.Ok but what they it seems strange is the maxfps, 50 too low for a card like this !?!
In fact now I checked I drop the clock frequency ranging (840mhz-863MHz-933MHz-1021mhz- 1030mhz) I increased the power limit to +50, obtained 1-2 fps moreSimply run the benchmark once again with MSI Afterburner launched in background and check the GPU frequency for sudden drops afterwards. Increase power limit if necessary, check also GPU temps. Max. fps should normally be somewhere above 100.
Processor | Core i5 2500K @ 4,5 GHz |
---|---|
Motherboard | ASUS P8Z77-V LX |
Cooling | Watercooled CPU + GPU |
Memory | Kingston 8GB 1333 MHz CL8 |
Video Card(s) | Sapphire R9 290 |
Storage | SSD 128 GB OCZ Agility 3, 3TB WD30EURS, 3TB Seagate external |
Display(s) | HP ZR2440w |
Audio Device(s) | Asus Xonar Essence ST @ Sennheiser HD600 |
Power Supply | Cooler Master Silent Pro 850W |
Does the card maintain the GPU frequency 1030 MHz constantly after increasing the power limit?In fact now I checked I drop the clock frequency ranging (840mhz-863MHz-933MHz-1021mhz- 1030mhz) I increased the power limit to +50, obtained 1-2 fps more
System Name | main/SFFHTPCARGH!(tm)/Xiaomi Mi TV Stick/Samsung Galaxy S23/Ally |
---|---|
Processor | Ryzen 7 5800X3D/i7-3770/S905X/Snapdragon 8 Gen 2/Ryzen Z1 Extreme |
Motherboard | MSI MAG B550 Tomahawk/HP SFF Q77 Express/uh?/uh?/Asus |
Cooling | Enermax ETS-T50 Axe aRGB /basic HP HSF /errr.../oh! liqui..wait, no:sizable vapor chamber/a nice one |
Memory | 64gb Corsair Vengeance Pro 3600mhz DDR4/8gb DDR3 1600/2gb LPDDR3/8gb LPDDR5x 4200/16gb LPDDR5 |
Video Card(s) | Hellhound Spectral White RX 7900 XTX 24gb/GT 730/Mali 450MP5/Adreno 740/RDNA3 768 core |
Storage | 250gb870EVO/500gb860EVO/2tbSandisk/NVMe2tb+1tb/4tbextreme V2/1TB Arion/500gb/8gb/256gb/2tb SN770M |
Display(s) | X58222 32" 2880x1620/32"FHDTV/273E3LHSB 27" 1920x1080/6.67"/AMOLED 2X panel FHD+120hz/FHD 120hz |
Case | Cougar Panzer Max/Elite 8300 SFF/None/back/back-front Gorilla Glass Victus 2+ UAG Monarch Carbon |
Audio Device(s) | Logi Z333/SB Audigy RX/HDMI/HDMI/Dolby Atmos/KZ x HBB PR2/Moondrop Chu II + TRN BT20S |
Power Supply | Chieftec Proton BDF-1000C /HP 240w/12v 1.5A/4Smart Voltplug PD 30W/Asus USB-C 65W |
Mouse | Speedlink Sovos Vertical-Asus ROG Spatha-Logi Ergo M575/Xiaomi XMRM-006/touch/touch |
Keyboard | Endorfy Thock 75% <3/none/touch/virtual |
VR HMD | Medion Erazer |
Software | Win10 64/Win8.1 64/Android TV 8.1/Android 13/Win11 64 |
Benchmark Scores | bench...mark? i do leave mark on bench sometime, to remember which one is the most comfortable. :o |
well ... here is my result (1150/1500)Ok but what they it seems strange is the maxfps, 50 too low for a card like this !?!
System Name | Killa |
---|---|
Processor | Phenom ii x6 1100t |
Motherboard | GIGABYTE GA-890XA-UD3 |
Cooling | H55 |
Memory | 4x2GB Ripjaws 1600 |
Video Card(s) | Vapor-x R9 290 |
Storage | Crucial M550 256GB SSD |
Display(s) | 60 in LG TV |
Case | Antec 200S |
Audio Device(s) | AMD built-in HDMI |
Power Supply | EVGA Supernova 850 G2 |
Software | Win7 64bit |
Very strange indeed. I have the same card and have read post after post about issues with those cards being undervolted. What is suggested and what I did is RMA it until I got a good one. I purchased mine through amazon as newegg was not carrying it. They overnighted me one each time I was not satisfied. I at one point had 3 cards sitting in my room. Even tried to crossfire for the heck of it. Of course, the bad cards did not really allow this. I hope you purchased from a company that will make RMAs easy.Thanks for the answers, but the problem I think MSI After Burn... if I disable MSI AB, everything at default, this is the result, I uninstalled and reinstalled, checked the settings in msiafterburner 410 , deleted the folder profiles ... I have no idea
Processor | Core i5 2500K @ 4,5 GHz |
---|---|
Motherboard | ASUS P8Z77-V LX |
Cooling | Watercooled CPU + GPU |
Memory | Kingston 8GB 1333 MHz CL8 |
Video Card(s) | Sapphire R9 290 |
Storage | SSD 128 GB OCZ Agility 3, 3TB WD30EURS, 3TB Seagate external |
Display(s) | HP ZR2440w |
Audio Device(s) | Asus Xonar Essence ST @ Sennheiser HD600 |
Power Supply | Cooler Master Silent Pro 850W |
Finally, this is the real world performance of R9 290, 1416 pts, that's much better than before . I think for tweaking Sapphire cards, Sapphire Trixx is the better alternative. I've had some issues with Afterburner, so I disabled voltage regulation via MB and I'm using it for monitoring only. With Trixx, my card is rock stable at 1200+ MHz (the card is watercooled).Thanks for the answers, but the problem I think MSI After Burn... if I disable MSI AB, everything at default, this is the result, I uninstalled and reinstalled, checked the settings in msiafterburner 410 , deleted the folder profiles ... I have no idea
System Name | Some computer stuff |
---|---|
Processor | Mostly Intel or AMD |
Motherboard | ATX or mATX |
Cooling | Bong Cooler |
Memory | DDR2-4 |
Video Card(s) | A few |
Storage | Plenty Platters or SSDs or USBs |
Display(s) | Samsung 23" |
Case | 5 on the floor |
Audio Device(s) | There's one for my M7 Gene, Oh I have 3-4 PCI 5.1 ones.Sabrent! lol |
Power Supply | 750-1000W |
Mouse | cheap |
Keyboard | Used ps2 from garage sales |
Software | Yeah |
Benchmark Scores | http://hwbot.org/user/schmuckley/#Hardware_Library http://valid.canardpc.com/rbjpbg |
I found that my IGP on the 2600K system was on for my recent post, So I uninstalled it and rebooted. It reinstalled itself. Then I disabled it and ran Heaven and got essentially the same score. My two R9-280s are both listed now. (X2 on the score)
View attachment 61539
Those are some sick clocks bro, I wonder why you scored so low, maybe your tdp limit? Have you tried 120% 95 c unlinked with priority on temp?Here is my score.
Those are some sick clocks bro, I wonder why you scored so low, maybe your tdp limit? Have you tried 120% 95 c unlinked with priority on temp?
Processor | Core i5 2500K @ 4,5 GHz |
---|---|
Motherboard | ASUS P8Z77-V LX |
Cooling | Watercooled CPU + GPU |
Memory | Kingston 8GB 1333 MHz CL8 |
Video Card(s) | Sapphire R9 290 |
Storage | SSD 128 GB OCZ Agility 3, 3TB WD30EURS, 3TB Seagate external |
Display(s) | HP ZR2440w |
Audio Device(s) | Asus Xonar Essence ST @ Sennheiser HD600 |
Power Supply | Cooler Master Silent Pro 850W |
As far as I know, there's no possibility to change the memory voltage on R9 290 (at least not for reference card, they do not have any programmable voltage regulator for video RAM). You can go and check it in Afterburner, whether the slider for the memory voltage is grayed out or not.OK I solved......That voltage you have put for 1500 Ram Clock??? when I try to put the clock RAM 1500 to me freezes the desktop
As far as I know, there's no possibility to change the memory voltage on R9 290 (at least not for reference card, they do not have any programmable voltage regulator for video RAM). You can go and check it in Afterburner, whether the slider for the memory voltage is grayed out or not.
System Name | Killa |
---|---|
Processor | Phenom ii x6 1100t |
Motherboard | GIGABYTE GA-890XA-UD3 |
Cooling | H55 |
Memory | 4x2GB Ripjaws 1600 |
Video Card(s) | Vapor-x R9 290 |
Storage | Crucial M550 256GB SSD |
Display(s) | 60 in LG TV |
Case | Antec 200S |
Audio Device(s) | AMD built-in HDMI |
Power Supply | EVGA Supernova 850 G2 |
Software | Win7 64bit |
nothing looks bad with the result posting. however, the clocks look mighty slow for the r9 290. are those reference? are you planning on doing some different cooling? because the 92C looks a little scary. just something to consider. i have a single r9 290 and am able to run it at 1175/1470 completely stable. but with those temps i would not suggest pushing anything higher without looking into case airflow and possible aftermarket GPU cooling (whether air or H2O).just benched my 2x msi r9 290 (977mhz / 1250mhz),
is everything allright with this highscore request?
View attachment 62299
System Name | Killa |
---|---|
Processor | Phenom ii x6 1100t |
Motherboard | GIGABYTE GA-890XA-UD3 |
Cooling | H55 |
Memory | 4x2GB Ripjaws 1600 |
Video Card(s) | Vapor-x R9 290 |
Storage | Crucial M550 256GB SSD |
Display(s) | 60 in LG TV |
Case | Antec 200S |
Audio Device(s) | AMD built-in HDMI |
Power Supply | EVGA Supernova 850 G2 |
Software | Win7 64bit |