TPU's Winter's End WCG Challenge (2/26 thru 3/6/2015)- join us to crunch/fold/win stuff

Caring1 · Feb 28, 2015

bubbleawsome said:
My poor chip has been bouncing around 90-100c for the past 48 hours. I didn't keep a close eye on it because my temp sensors didn't go off, I didn't feel throttle, and the fan didn't ramp up much.

Where did you see those temps?
Are you sure that's not just the CPU usage being shown?

manofthem · Feb 28, 2015

bubbleawsome said:
My poor chip has been bouncing around 90-100c for the past 48 hours. I didn't keep a close eye on it because my temp sensors didn't go off, I didn't feel throttle, and the fan didn't ramp up much.

It's not dead, but daaaaaaannnngggggg.
I'm going to clean out the machine, but I think I need more fans as I only have one blowing air through the entire case.
Last time I ran it this hard it was only about a month ago and it was in the high 70's, but that is to be expected with a 1.3v OC and the crappiest $40 air cooler ever. (seriously, look at the TPU charts. The NZXT T40 isn't great)

I'll try to keep returning points, but I'm not sure if I will be able to.

Is that the 4670k? I wouldn't worry too much about it, those things are resilient

Same thing happened to my 4790 after messing with the AIO cooler, fans werne't spinning and the chip was maxed out at like 95. It's still kicking

But it sounds like a little drop in OC or at least voltage is in order. With these cpus, a decent cooler is necessary for a decent OC.

bubbleawsome · Feb 28, 2015

Caring1 said:
Where did you see those temps?
Are you sure that's not just the CPU usage being shown?

Afterburner. Positive it was temps.

manofthem said:
Is that the 4670k? I wouldn't worry too much about it, those things are resilient Same thing happened to my 4790 after messing with the AIO cooler, fans werne't spinning and the chip was maxed out at like 95. It's still kicking

But it sounds like a little drop in OC or at least voltage is in order. With these cpus, a decent cooler is necessary for a decent OC.

It is the 4670k. I dropped from 4.2@1.285v to stock@1.120v. It's fast enough for me at stock anyway.
Still going to clean it though.

I have to wonder what my power usage was. Games using ~60% were going to 60w. 100c and 1.285v along with full load and possibly AVX. I wouldn't be surprised if I was hitting the 110w limit I set.

manofthem · Feb 28, 2015

This is what SNURK and Friends team is saying right now:

krusha03 · Feb 28, 2015

Norton said:
@krusha03 a new setup only gets a small batch of work initially. Once that work is done the buffer will load up with work properly.

Also, if you're manually updating in your BOINC Manager you need to wait for the communication deferred timer to time out first- takes 2 minutes to do that

Well i had all 8 task being 4 hours and finishing after the maintainance would start so i did a project reset and made the profile get only FAAH hoping that enough tasks would be sent before 03:00 UTC and what do you know... This morning I wake up and 300 FAAH tasks in the buffer so I guess I am good

mauriek · Feb 28, 2015

well as always for the past few month, 4 cores/thread my 4770K is crunching for TPU 24/7..and the rest of the thread are working for server duty to help cover their running cost so it will be self sustain WCG Rig and hope it helps.

Caring1 · Feb 28, 2015

Is anyone else having problems submitting completed tasks?
Mine keeps saying communication deferred and tasks have been building up for a while, even hitting update does nothing, it returns to the deferred message.
I checked the WCG site and that is functional.

krusha03 · Feb 28, 2015

Caring1 said:
Is anyone else having problems submitting completed tasks?
Mine keeps saying communication deferred and tasks have been building up for a while, even hitting update does nothing, it returns to the deferred message.
I checked the WCG site and that is functional.

It has been said about 20 times that there will be maintainance today from 03:00 UTC for 16 hours meaning you wont be able to download or submit tasks in that time slot. Check the notices tab in your boinc client

I hope that you have increased your buffer otherwise you may run out of tasks to do :/

Caring1 · Feb 28, 2015

I'm aware of that and it had stopped earlier for me for a few hours, then restarted.
The whole WCG site was unable to be accessed at that time too.
Now I can access the site but tasks are not uploading.

If it is still maintenance then there isn't an issue, I have a couple of days of tasks waiting.

Norton · Feb 28, 2015

Updates for the WCG shutdown can be found here:

https://secure.worldcommunitygrid.org/forums/wcg/viewthread_thread,37793_lastpage,yes#lastpost

I'm guessing that we should be back to normal within 3-4 hrs

SirKeldon · Feb 28, 2015

I went out of WU's in the Xeon server, hope they're back soon cause the last thread is being processed, just one hour remaining and after that all my cores will be stopped till they reopen the DB. A real shame I couldn't find the "buffer" stuff for it

At least, 3 of the 4 computers are still doing computational work, not a big drama

@Knoxx29 congrats on your badge!!! :toast:

.... now what's happening with the non-star ones that are not updating correctly @Norton? :rolleyes:

krusha03 · Feb 28, 2015

SirKeldon said:
I went out of WU's in the Xeon server, hope they're back soon cause the last thread is being processed, just one hour remaining and after that all my cores will be stopped till they reopen the DB. A real shame I couldn't find the "buffer" stuff for it

Have you tried changing the profile settings from the wcg website itself? it should automatically download them to boinc if you don't override them

SirKeldon · Feb 28, 2015

krusha03 said:
Have you tried changing the profile settings from the wcg website itself? it should automatically download them to boinc if you don't override them

Nope, I just augmented manually on both Windows clients the amount of buffer to be downloaded, to avoid the lack of work during the outage ... unfortunately I couldn't find any option for "boinccmd" tool to accomplish same thing in Linux (as stated here and here)

I think in the profile page for WCG there's no such option (rechecked) and neither under your Devices Profiles, where you can set up this amount of max/min work buffer thing from the WCG website?

Para_Franck · Feb 28, 2015

Hey guys, I tried joining the challenge when I got up this morning. Got Boinc Installed but I get an error massage saying that there is no work available? Am I missing something? I am to late to join the crunching fest?
I guess I'll just continue folding for now.

krusha03 · Feb 28, 2015

SirKeldon said:
Nope, I just augmented manually on both Windows clients the amount of buffer to be downloaded, to avoid the lack of work during the outage ... unfortunately I couldn't find any option for "boinccmd" tool to accomplish same thing in Linux (as stated here and here)

I think in the profile page for WCG there's no such option (rechecked) and neither under your Devices Profiles, where you can set up this amount of max/min work buffer thing from the WCG website?

If you log in, you go to settings device manager, see the profile your system is using, then devide profiles, you choose custom profile and you scroll down to the work unit cache settings. See photos:

Para_Franck said:
Hey guys, I tried joining the challenge when I got up this morning. Got Boinc Installed but I get an error massage saying that there is no work available? Am I missing something? I am to late to join the crunching fest?
I guess I'll just continue folding for now.

The servers are undergoing maintainance at the moment. You should be able to get work later today

Para_Franck · Feb 28, 2015

OO yeah! I'm happy to join you guys with this one, I have been thinking about it for a while now. I am sure those 4,2Ghz of awesomeness will help you out.

SirKeldon · Feb 28, 2015

krusha03 said:
If you log in, you go to settings device manager, see the profile your system is using, then devide profiles, you choose custom profile and you scroll down to the work unit cache settings. See photos:

View attachment 63029

View attachment 63028

Oh ok, I didn't realized under "Custom" you could specify that same amount of info as in advanced settings ... as I told you in previous post I rechecked it and as it was on "Maximum output" and didn't see the options over there, thought it wasn't possible. Now I see it is, guess I know what to do for the next outage on Linux servers, very appreciated help @krusha03

krusha03 · Feb 28, 2015

Para_Franck said:
OO yeah! I'm happy to join you guys with this one, I have been thinking about it for a while now. I am sure those 4,2Ghz of awesomeness will help you out.

That i7 with HT will crunch 8 WUs at the same time like there is no tomorrow

SirKeldon said:
Oh ok, I didn't realized under "Custom" you could specify that same amount of info as in advanced settings ... as I told you in previous post I rechecked it and as it was on "Maximum output" and didn't see the options over there, thought it wasn't possible. Now I see it is, guess I know what to do for the next outage on Linux servers, very appreciated help @krusha03

No problem, glad i could help

Norton · Feb 28, 2015

WCG maintenance is completed- uploads and downloads of work seems to be doing fine atm

st2000 · Feb 28, 2015

is this ok?cause tasks dont update

and yea, got no problems with internet

Para_Franck · Feb 28, 2015

Norton said:
WCG maintenance is completed- uploads and downloads of work seems to be doing fine atm

Confirmed, working well here. It's time to turn on the case fans.

krusha03 · Feb 28, 2015

krusha03 said:
Doesn't matter if they are 3M team, we should take them over tomorrow

BUCK NASTY said:
2 days ago, Mr Kermit transferred over from University Of Illinois-Champlaign to SNURK and Friends and he is a heavy hitter. Looks like he just freelances and bounces around(Trolling Challenge's along the way). 1.3M Boinc Points(9M+ WCG PPD) per day is something to be reckoned with.

I guess they are a 13M team now

SirKeldon · Feb 28, 2015

Norton said:
WCG maintenance is completed- uploads and downloads of work seems to be doing fine atm

52 WU's uploaded, getting new tasks on the Xeon now! :toast:

Norton · Feb 28, 2015

Prize post updated!
http://www.techpowerup.com/forums/t...to-crunch-fold-win-stuff.210158/#post-3244957

Added the details and requirements for the Newbie rig Grand prize and a couple of additional hardware prizes. Check em' out!

I've been going a little nuts trying to keep up lately so please let me know if I missed a prize or owe you a PM to discuss a donation that you pledged.

ThE_MaD_ShOt · Feb 28, 2015

Crunching rig prize requirement edit:
- earn and display the WCG-TPU Cruncher badge (i.e. have 100k FreeDC points)*
* rig will not be shipped to the winner until this requirement is met
or accumulate 100k FreeDc points, whatever comes first just in case you get trolled for your badge like @Knoxx29 did. :laugh:

System Name	H7 Flow 2024
Processor	AMD 5800X3D
Motherboard	Asus X570 Tough Gaming
Cooling	Custom liquid
Memory	32 GB DDR4
Video Card(s)	Intel ARC A750
Storage	Crucial P5 Plus 2TB.
Display(s)	AOC 24" Freesync 1m.s. 75Hz
Mouse	Lenovo
Keyboard	Eweadn Mechanical
Software	W11 Pro 64 bit

Processor	3900X @ 4.0
Motherboard	Asus ROG Strix X570-E
Cooling	DeepCool Castle 360EX
Memory	G Skill Trident Z Neo 32GB 3600
Video Card(s)	RX 5700 XT Pulse
Storage	Sabrent Rocket Q 1TB
Display(s)	LG 34UC88
Case	Thermaltake P3
Power Supply	Super Flower Leadex III 750w
Mouse	Logitech G900
Keyboard	G Skill KM570 MX Silver
Software	Windows 10 Pro

Processor	5900x
Motherboard	MSI MEG UNIFY
Cooling	Arctic Liquid Freezer 2 360mm
Memory	4x8GB 3600c16 Ballistix
Video Card(s)	EVGA 3080 FTW3 Ultra
Storage	1TB SX8200 Pro, 2TB SanDisk Ultra 3D, 6TB WD Red Pro
Display(s)	Acer XV272U
Case	Fractal Design Meshify 2
Power Supply	Corsair RM850x
Mouse	Logitech G502 Hero
Keyboard	Ducky One 2

Processor	3900X @ 4.0
Motherboard	Asus ROG Strix X570-E
Cooling	DeepCool Castle 360EX
Memory	G Skill Trident Z Neo 32GB 3600
Video Card(s)	RX 5700 XT Pulse
Storage	Sabrent Rocket Q 1TB
Display(s)	LG 34UC88
Case	Thermaltake P3
Power Supply	Super Flower Leadex III 750w
Mouse	Logitech G900
Keyboard	G Skill KM570 MX Silver
Software	Windows 10 Pro

System Name	Desktop / Laptop
Processor	AMD Ryzen R7 5600x / Intel i5-4200U
Motherboard	ASUS TUF B550-Plus / Lenovo MB
Cooling	Arctic Liquid Freezer II 280 / Stock
Memory	Corsair Vengeance 2x16GB DDR 3800 / 8GB DDR3-1600MHz
Video Card(s)	AMD Radeon 6900XT / Intel HD 4400
Storage	2.5TB SSDs + 4TB HDD / Samsung 850 EVO 500 GB
Display(s)	34" LG Ultrawide / 12.5 " 1080p IPS Touchscreen
Case	Fractal Design R6 / Lenovo X240
Audio Device(s)	Onboard / Onboard
Power Supply	Enermax REVOLUTION87+ 1000W / Lenovo 40W
Mouse	Razer Basilisk X
Keyboard	Dell Business Multimedia Keyboard
Software	Windows 10 Pro 64 bit
Benchmark Scores	Chicken Invaders 5 @125+ FPS

TPU's Winter's End WCG Challenge (2/26 thru 3/6/2015)- join us to crunch/fold/win stuff

Caring1

manofthem

WCG-TPU Team All-Star!

bubbleawsome

manofthem

WCG-TPU Team All-Star!

krusha03

mauriek

Caring1

krusha03

Caring1

Norton

Moderator - Returning from the Darkness

SirKeldon

krusha03

SirKeldon

Para_Franck

krusha03

Para_Franck

SirKeldon

krusha03

Norton

Moderator - Returning from the Darkness

st2000

Para_Franck

krusha03

SirKeldon

Norton

Moderator - Returning from the Darkness

ThE_MaD_ShOt

System Name	Folding System
Processor	Ryzen 5 5500
Motherboard	ASRock B540 Steel Legend
Cooling	EK Clean CSQ WB + EK CoolStream RAD XTX 480 + Swiftech D5 Pump
Memory	4 x 8 GB DDR4 HyperX Fury
Video Card(s)	Zotac RTX 3070 8Gb Twin Edge OC
Storage	Team MP33 NVME 1TB \| 4x Seagate 4TB Raid 0
Display(s)	Titan Army 27G1 IPS 2K 144Hz
Case	Corsair 900D + 1 Aerocool 14cm Fan, 3 CM Fan 12cm, 4 Scythe Slim Fan 12cm, 4 Corsair Fan 12cm
Audio Device(s)	ASUS Xonar Phoebus + Hippo cri head amp + Sennheiser HD 598 + Razer Megalodon
Power Supply	Seasonic P1000 Platinum
Mouse	Logitech G502
Keyboard	Logitech G910 Mech Keyboard
Software	Windows 11 Home

System Name	Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor	Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard	Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling	Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory	2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s)	MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage	Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s)	Main PC (2x24" Dell UltraSharp U2414H)
Case	Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s)	Logitech Z625 THX 2.1 speakers
Power Supply	EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse	G300s
Keyboard	Corsair K65
VR HMD	N/A
Software	Windows 10 Pro or Ubuntu
Benchmark Scores	Why sit on the Bench when you can get in the game and Crunch!!!

System Name	The Phoenix (rev. 3.0)
Processor	Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard	ASUS TUF Z390 PRO-GAMING
Cooling	Custom Full Loop w/EKWB & Swiftech components
Memory	32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s)	MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage	Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s)	LG 29UM65-P (2560x1080 @ 75 Hz)
Case	Thermaltake Core V51
Audio Device(s)	Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply	Corsair RM750 (ver. 2019)
Mouse	Logitech G700s
Keyboard	Razer Blackwidow Chroma V2
Software	MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64

System Name	Franck-PC
Processor	i7-4770K @ 4.2Ghz
Motherboard	Asus Maximus VI Hero
Cooling	Be quiet! DARK ROCK PRO 2 Silent
Memory	2x8GB Kingston HyperX Beast 2400 DDR3
Video Card(s)	MSI Gaming-X RX480 8gig
Storage	SanDisk EXTREME II 480GB SSD + WD 2TB HDD
Case	Fractal design Arc MIDI R2
Power Supply	Corsair HX620W Modular

System Name	home-pc
Processor	i7-950
Motherboard	TUF-x58
Cooling	nh-d14
Memory	8GB ram
Video Card(s)	rx-580(4)
Storage	1tv raid, 240 mlc ssd, 1tb for data
Display(s)	32" TV 1080p
Case	-
Audio Device(s)	audigy 2 zs platinum
Power Supply	some chinese expiriment
Software	10

System Name	Agent Texas / Selene / Eve
Processor	Ryzen7 5800x / Fx 8350 / Fx 8350
Motherboard	Gigabyte B550 Aorus Elite Ax V2 / Gigabyte 990FXA-UD3 r4.0 / Msi 970a Krait
Cooling	Msi Mag Core liquid / H100i / Cryo-pc Cooler
Memory	2 x32 GB Gskil Ripjaws v series / 4x 8gb G.Skill Snipers / 2x 8gb G.Skill Ripjaws
Video Card(s)	Gigabyte Rx 6800xt / Msi RX580 / Gigabyte R9 290x
Storage	1tb M.2, 2tb wd / 500 gb ssd, 2x 2tb Wd Blacks/ 500 gb ssd, 1tb WD Black
Display(s)	Dell Ultra Sharp 2408 WFp / Hp w2207 / Sanyo tv
Case	Corsair 780t White / Raidmax Vampire / NZXT Phantom 240
Audio Device(s)	Onboard Hd Audio / Onboard Hd Audio / Onboard Hd Audio
Power Supply	Corsair Rm 850 watt / Corsair TX 850 watt / Corsair TX 750 watt
Mouse	Logitech G502 Hero / Logitech G500s / Logitech wireless
Keyboard	Corsair Strafe / Corsair k50 / Logitech wireless
Software	Win 11 pro / Win 11 pro / Win 11 pro
Benchmark Scores	What are benchmarks anyway?