Your PC ATM

[AsRock]

i see you have also ryos. it is only blue led or it is rgb. i am locking at glow but there isnt retailers that have it in show room around me so i cant check it and roccat.org isnt very clear about color of leds. i prefer red over blue and i still hesitate should i take it or not (the other thing is a price but this is solvable in time).

Will have to wait a little longer .

 

[ne6togadno]

Will have to wait a little longer .

no problem with waiting i have to get cash anyway

 

[GreiverBlade]

no problem with waiting i have to get cash anyway

well my Ryos is a TLK Pro so only blue (why i have my Nyth in blue too .. ) i got it during a promo for 89chf instead of 129chf (tho i hate Chroma trend .. but i would gladly liked to have a White or Red type )
while i did read about MX switch failing my MX Brown are perfectly fine for the moment (knock on wood ) and the leds still non dead.

EDIT:
Dunno if ya be able replace the Tyon as it has those 2 top buttons which i my self like about it, hope ya don't end up like me and end up using 2 mouses hahahha.

well i got used quick to the Nyth ... you mean the side click 2 buttons right? because the fin switch the Nyth has it too.

to i have to admit i searched a bit for my button at start since the Nyth pattern is
1234
5678
9101112

while all other thumbpad mouse are
14710
25811
36912

 

[AsRock]

well my Ryos is a TLK Pro so only blue (why i have my Nyth in blue too .. ) i got it during a promo for 89chf instead of 129chf (tho i hate Chroma trend .. but i would gladly liked to have a White or Red type )
while i did read about MX switch failing my MX Brown are perfectly fine for the moment (knock on wood ) and the leds still non dead.

well i got used quick to the Nyth ... you mean the side click 2 buttons right? because the fin switch the Nyth has it too.

to i have to admit i searched a bit for my button at start since the Nyth pattern is
1234
5678
9101112

while all other thumbpad mouse are
14710
25811
36912

I was referring to the top 2 left buttons.

If you want your keyboard to last longer never use canned air or any thing like that and don't tip it upside down and shake it either.

 

[GreiverBlade]

I was referring to the top 2 left buttons.

If you want your keyboard to last longer never use canned air or any thing like that and don't tip it upside down and shake it either.

well there is 4 in total 2 top left and 2 top right ... strangely enough i used more instinctively the Tyon than any 12 side button mouse (Nyth include) but the Nyth being sooooo comfortable for me (i have big hands and i palm grip) i made some effort to get used

as for the cleaning ... yep i did read that somewhere

 

[Arrakis9]

Got a few new things from Ppc's Handles, upgraded the front IO to USB 3 and swapped coolers for something a little sexier and quieter. Its coming together nicely next thing on the list is to add another GTX 670 (if any ones looking to sell ) and add a 4TB drive to the mix.

 

[AsRock]

I think they should sell that cpu cooler with scaffolding.

 

[peche]

a can of black spray can do miracles on that case interior...

 

[mrwizard200]

Picked up a 980 KPE and Corsair sleeved cables...looks so dank.

 

[GreiverBlade]

HEY! let's CAM over your GRID... (lame joke i know ...)

meanwhile testing NZXT GRID+ and the CAM software

quite complete i have to say ... and with the Android app (IOS to ofc) pretty interesting... good job NZXT on that fan controller (who do a lil' more than fan control)
good point it's a 6 fan 30w max load and ... i have 6 fans to control

the software in question (well 39° @4.5 idle seems ... nah ... normal ... 55% fan and not 100% like the review, at 100% i get 32° and i use the bundled TIM that came with the Triton for "testing purpose" )

 

[Glao]

I know that its specs may be outdated, but heres my most recent build after a 5 year hiatus. Im very happy with how tidy it all is I must say

 

[Brusfantomet]

HEY! let's CAM over your GRID... (lame joke i know ...)

meanwhile testing NZXT GRID+ and the CAM software
View attachment 67335 View attachment 67334
quite complete i have to say ... and with the Android app (IOS to ofc) pretty interesting... good job NZXT on that fan controller (who do a lil' more than fan control)
good point it's a 6 fan 30w max load and ... i have 6 fans to control

the software in question (well 39° @4.5 idle seems ... nah ... normal ... 55% fan and not 100% like the review, at 100% i get 32° and i use the bundled TIM that came with the Triton for "testing purpose" )
View attachment 67327 View attachment 67333
View attachment 67328 View attachment 67329 View attachment 67330 View attachment 67331 View attachment 67332

so its better than the fiasco that was corsair comander? do you know how low the PWM duty cycle goes? can you sett fanspeed based on BOTH cpu, mb and gpu temps?

 

[GreiverBlade]

so its better than the fiasco that was corsair comander? do you know how low the PWM duty cycle goes? can you sett fanspeed based on BOTH cpu, mb and gpu temps?

didn't test that and mainly don't care (it no pwm it's a fan controller, like a Rheobus typebut digital, with a USB monitoring) you can set custom curves in fan profile but for me it's either movie mode : 55% and lower or full 100% during game (music and volume at max) and there is no separate channel for each fans (mine are 2x120 for the cpu loop 2x120 for the gpu loop 1x 120 front bottom intake 1x140 rear top exhaust ) the temp i think it's the CPU who is Prime, tho i am not so sure)

Read some review about the GRID+ you will get directly it was not a Fiasco like the CC was (well the fiasco is from being from corsair alone for me at last with NZXT they work with any other brand AIO or case or PSU.)

 

[Brusfantomet]

didn't test that and mainly don't care (it no pwm it's a fan controller, like a Rheobus typebut digital, with a USB monitoring) you can set custom curves in fan profile but for me it's either movie mode : 55% and lower or full 100% during game (music and volume at max) and there is no separate channel for each fans (mine are 2x120 for the cpu loop 2x120 for the gpu loop 1x 120 front bottom intake 1x140 rear top exhaust ) the temp i think it's the CPU who is Prime, tho i am not so sure)

Read some review about the GRID+ you will get directly it was not a Fiasco like the CC was (well the fiasco is from being from corsair alone for me at last with NZXT they work with any other brand AIO or case or PSU.)

ok, thanks, no pwm = no go, am using a Lamptron FC2 together (vltage control) with the PWM headers on the MB for PWM control, can get my fans down to 400 rpm with that setup, or up to 1200 rpm.

Was skeptical about the K95 RGB i have here, but its alright, the software is not the best but at least the hardware feels good.

 

[Johnny Utah]

wanted to build a PC small enough that you can fit in a suitcase and take into a plane so the case became very important for my built
first i looked at Cooltek C3 https://www.techpowerup.com/reviews/Cooltek/C3 but could not get it delivered in time from Germany so got this

- MODECOM ALFA M2 (300 x 176 x 380 mm) http://www.modecom.eu/modecom_alfa_m2/mini/computer_cases/pc_cases_accesories/product

- Intel i7 6700K
- Asus ROG Gene VIII
- Corsair HX 750i
- Noctua NH-D9L
- Corsair DDR4 3000
- Intel 730 SSD 480 GB
- Samsung 2.5 HDD 2 TB
- 2x Noctua Redux 80mm PWM
- 1x Noctua NF-A9 PWM 92mm

waiting for the new generation of VGA cards in early 2016. problems? just one: case does not fit power supply screw mount so i had to screw it in the grill
if i would have bought the Corsair AX760i it would have fit perfectly and i could have mounted a 120mm fan so now i had to do with a Noctua NF-A9 PWM 92mm

http://imgur.com/fQr4zNW

 

[khemist]

Hopefully tomorrow when i change the tubing to Blue and install the Bitspower fittings it should start to match up things a bit better.

Still waiting on my watercool GPU block to be released and have to sort a few cables and get some lighting installed also.

 

[MIRTAZAPINE]

wanted to build a PC small enough that you can fit in a suitcase and take into a plane so the case became very important for my built
first i looked at Cooltek C3 https://www.techpowerup.com/reviews/Cooltek/C3 but could not get it delivered in time from Germany so got this

- MODECOM ALFA M2 (300 x 176 x 380 mm) http://www.modecom.eu/modecom_alfa_m2/mini/computer_cases/pc_cases_accesories/product

That is a nice case! Only 20 liters. That is tiny for the amount of hardware that you cramped inside there. What do you mean can't screw on the power supply? It is too wide?

 

[Johnny Utah]

That is a nice case! Only 20 liters.

That is tiny for the amount of hardware that you cramped inside there. What do you mean can't screw on the power supply? It is too wide?

Thanks and i just installed (for testing only) a reference design 8800 GTX wich fit confortably
About the power supply, the screws mounts on the Corsair HX 750i did not match the screw mounts on the case

 

[HammerON]

Hopefully tomorrow when i change the tubing to Blue and install the Bitspower fittings it should start to match up things a bit better.

Still waiting on my watercool GPU block to be released and have to sort a few cables and get some lighting installed also.

Looking good
I like that you included a drain plug and valve.

 

[Hamed DC]

Hi everyone.
My Big Boy

 

[RCoon]

Leak testing

 

[sneekypeet]

Latest project.... almost finished!

 

[Zen_]

Well...my old ASRock Z68 Extreme3 finally bit the dust after four years of hard use, and I killed the fans on yet another video card (Asus 770). Going to give this 7870K setup a try for the light gaming I do these days.

The illuminated audio boost chipset is a really useful touch for sure

 

[ensabrenoir]

Latest project.... almost finished!

Ok.... I give up what vid card is that?

 

[[Ion]]

Ok.... I give up what vid card is that?

Looks like this: http://www.amazon.com/dp/B00HPS4B00/?tag=tec06d-20