- Joined
- May 14, 2004
- Messages
- 27,840 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
Last edited:
-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
How to enable SATA-II and SLI on NForce4
- Thread starter W1zzard
- Start date
Andi64
New Member
- Joined
- Aug 22, 2005
- Messages
- 17 (0.00/day)
| Processor | AMD Opteron 146 @ 3Ghz / AMD Athlon64 3000+ |
|---|---|
| Motherboard | DFI nForce4 Ultra-D Rev.AD0 / MSI Neo 4 Platinum |
| Cooling | Scythe FCS-50 Heatlane / AMD Opteron 940 Stock Copper Cooler |
| Memory | G.Skill 2*1GB HS DDR500 3-4-4 / OCZ Rev.3 512MB DDR400 2-3-3 |
| Video Card(s) | Sapphire X1800XT PE 512MB / Chaintech 6800LE @ 16P/6VS 420/880 128MB |
| Storage | Hitachi 80GB S-ATAII / 2*40GB ATA100 RAID 0 |
| Display(s) | Samsung 796MB / Philips 107C5 |
| Case | Vitsuba Master / Vitsuba (Chenming) Alien |
| Audio Device(s) | Creative X-Fi Xtreme Music 7.1 / Onboard 7.1 |
| Power Supply | Topower 520WP5 29A@12V / ThermalTake Purepower 420W 18A@12V |
| Software | Windows XP PRO SP2 |
The Chaintech VNF4 and VNF4-Ultra both have the same PCB. Can I unlock SATA-2 features in the nForce4 non ultra VNF4?
- Joined
- May 14, 2004
- Messages
- 27,840 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
this will work on any board which uses the nforce 4 chipset
hi!
having read this article about enabling sata2 mode on nf4 chips i began to wander whether i can do the same with my abit an8 mobo. i know guys, w1zzard already said it is possibble on all nf4 chip motherbaords.
my next question is: will this mod turn my an8 into a an8 ultra?
having read this article about enabling sata2 mode on nf4 chips i began to wander whether i can do the same with my abit an8 mobo. i know guys, w1zzard already said it is possibble on all nf4 chip motherbaords.
my next question is: will this mod turn my an8 into a an8 ultra?
D
Dynamic
Guest
So has anyone tried it on an "DFI Lan Party UT nF4-D" yet? What happen to this thread? I have a pair of BH-5 Chips i want to run along with SLI here soon and i was wondering if this board is worth getting for $115 that will work with SLI-MODE?
mydumpstinks
New Member
- Joined
- Jan 22, 2006
- Messages
- 14 (0.00/day)
| Processor | AMd 3800 x2 @2.5 |
|---|---|
| Motherboard | abit KN* Ultra |
| Cooling | Oem air |
| Memory | 2gig cheapo ddr |
| Video Card(s) | asus eax800 gto |
| Storage | 80 gig hitachi sata 40 gig seagate ide |
| Display(s) | Optronix 19" lcd |
| Case | NoName |
| Audio Device(s) | Sblive Value |
| Power Supply | 450w No Name |
| Software | allsorts |
From memory not sure if this is true for all sata 2 hd, but im sure the hitachi sata 2 drives ship without sata2 enabled, i had to download hitachi Feature Tool (v2.00) to go into the hd and enable sata2, http://www.hitachigst.com/hdd/support/download.htm feature tool is 3\4 down the page, i know it reads my seagate drive settings also, so maybe worht having a look at your own drive settings, dont change what you dont know tho 
ebuprofen
New Member
- Joined
- Aug 27, 2005
- Messages
- 12 (0.00/day)
- Location
- Estonia, Tallinn
| Processor | AMD X2 3800+ s939 |
|---|---|
| Motherboard | Asus A8N SLI Deluxe |
| Cooling | Thermaltake BigTyphoon |
| Memory | Corsair XMS3200C2 1024MB |
| Video Card(s) | Asus 7900GS TOP 256MB |
| Storage | Seatgate 250Gb SATA2 |
| Display(s) | Samsung 2032BW |
| Case | ColorsIT |
| Audio Device(s) | Hercules Fortissimo3 |
| Power Supply | ColorsIT stock |
ebuprofen
New Member
- Joined
- Aug 27, 2005
- Messages
- 12 (0.00/day)
- Location
- Estonia, Tallinn
| Processor | AMD X2 3800+ s939 |
|---|---|
| Motherboard | Asus A8N SLI Deluxe |
| Cooling | Thermaltake BigTyphoon |
| Memory | Corsair XMS3200C2 1024MB |
| Video Card(s) | Asus 7900GS TOP 256MB |
| Storage | Seatgate 250Gb SATA2 |
| Display(s) | Samsung 2032BW |
| Case | ColorsIT |
| Audio Device(s) | Hercules Fortissimo3 |
| Power Supply | ColorsIT stock |
Can anyone tell me, if its possible to enable sata-2 on my chipset
S3phy
New Member
- Joined
- Jan 7, 2007
- Messages
- 1 (0.00/day)
- Location
- Bordeaux, France
| Processor | AMD Athlon64 Winchester 3000+ skt939 |
|---|---|
| Motherboard | Gigabyte GA-K8NF-9 |
| Cooling | AMD Stock cooler |
| Memory | 2x 512MB Samsung PC3200 |
| Video Card(s) | nVidia GeForce 7600GT (by Asus) |
| Storage | Seagate 7200.10 320GB |
| Display(s) | Dell 2407WFP (24" LCD) |
| Case | Antec SLK-3000B |
| Power Supply | Fortron Green Power 400W |
| Software | Ubuntu 7.10 i386 |
I just tried the SATA-II mod on my Gigabyte GA-K8NF-9 (based on a cheap nForce4-4x chipset) and it works great 
Before :
After
:
(Sorry for bringing up such an old topic
)
Before :
After
:
(Sorry for bringing up such an old topic
)TikiZombie
New Member
- Joined
- Mar 31, 2007
- Messages
- 2 (0.00/day)
anyone have any tips where I can find these connector on my ECS Nforce4-a939
I'm assuming/hoping it's on the same side as the expansions slots, but I'm not seeing the chip with the nvidia logo, so I'm having trouble locating these things.
Any help is appreciated, thank you.
I'm assuming/hoping it's on the same side as the expansions slots, but I'm not seeing the chip with the nvidia logo, so I'm having trouble locating these things.
Any help is appreciated, thank you.
on the ECS NFORCE4 a939 unless you have one of the boards that came out within the 1st couple weeks then the rest of the chips on the board they seem to have covered it in some kinda of thin layering, and if you attempt to scratch it off then you might risk damaging the board when you attempt to scratch off the thin layer coating.
THe solder points on the A939 are not in plane sight like some of the other boards. oh well, what do you expect for a cheappy board.
TikiZombie
New Member
- Joined
- Mar 31, 2007
- Messages
- 2 (0.00/day)
Thanks for the reply on this somewhat outdated thread.
Oh well, perhaps too much trouble for now, I wouldn't want to damage my current setup.
Perhaps when I make my next build I'll try fooling around with it
Oh well, perhaps too much trouble for now, I wouldn't want to damage my current setup.
Perhaps when I make my next build I'll try fooling around with it
- Joined
- Feb 12, 2007
- Messages
- 1,192 (0.18/day)
- Location
- scotland
| System Name | spuds K8-X2 |
|---|---|
| Processor | amd athlon X2 4200+ toledo s939 2794mhz 254x11 1.4 vcore |
| Motherboard | MSI K8N Neo4-F v1.0 (MS-7125) nforce4 sata2 mod, laptop cpu heatpipe copper nb cooler |
| Cooling | akasa evo "blue" + 90mm fan, 2x120mm front, 250mm side, 120mm rear, 120mm in psu, pci slot exhaust. |
| Memory | OCZ Platinum XTC DDR PC3200 4GB(4x1024) @254mhz 3-3-3-8 2T |
| Video Card(s) | sapphire HD3870 512mb GDDR4 vf900cu, several ramsinks on components / nvidia 7300gt 256mb secondary |
| Storage | hitachi 160gb (slightly fried) / hitachi 120gb ATA / Seagate 160gb / 2x ps3 seagate 60gb |
| Display(s) | CTX EX1300F 20" flat CRT, 1280x1024@100hz / 19" benq FP91G X / 19" hanns-g (all free) |
| Case | mesh server/gaming black case, 9x 5.25' drive bays, silvestone auto fan controller |
| Audio Device(s) | onboard realtek alc850 7.1/soundblaster LIVE! ct4780 + kxaudio - sony home theatre surround |
| Power Supply | winpower 650w, system draws around 470-500w under load(+all screens) |
| Software | win7 64bit |
| Benchmark Scores | ~16m trips/sec using mty trip generator. triple monitor gaming using SoftTH. 3840x1024 |
just had a look at my msi k8n neo4, seems to have those contacts sealed,
Last edited:
- Joined
- Feb 12, 2007
- Messages
- 1,192 (0.18/day)
- Location
- scotland
| System Name | spuds K8-X2 |
|---|---|
| Processor | amd athlon X2 4200+ toledo s939 2794mhz 254x11 1.4 vcore |
| Motherboard | MSI K8N Neo4-F v1.0 (MS-7125) nforce4 sata2 mod, laptop cpu heatpipe copper nb cooler |
| Cooling | akasa evo "blue" + 90mm fan, 2x120mm front, 250mm side, 120mm rear, 120mm in psu, pci slot exhaust. |
| Memory | OCZ Platinum XTC DDR PC3200 4GB(4x1024) @254mhz 3-3-3-8 2T |
| Video Card(s) | sapphire HD3870 512mb GDDR4 vf900cu, several ramsinks on components / nvidia 7300gt 256mb secondary |
| Storage | hitachi 160gb (slightly fried) / hitachi 120gb ATA / Seagate 160gb / 2x ps3 seagate 60gb |
| Display(s) | CTX EX1300F 20" flat CRT, 1280x1024@100hz / 19" benq FP91G X / 19" hanns-g (all free) |
| Case | mesh server/gaming black case, 9x 5.25' drive bays, silvestone auto fan controller |
| Audio Device(s) | onboard realtek alc850 7.1/soundblaster LIVE! ct4780 + kxaudio - sony home theatre surround |
| Power Supply | winpower 650w, system draws around 470-500w under load(+all screens) |
| Software | win7 64bit |
| Benchmark Scores | ~16m trips/sec using mty trip generator. triple monitor gaming using SoftTH. 3840x1024 |
iv managed to get around that prob,
used a small drill bit, an a portable soldering iron,
sata2 wasnt enabled but it is now,
used a small drill bit, an a portable soldering iron,
sata2 wasnt enabled but it is now,
QuarterMain
New Member
- Joined
- Feb 8, 2008
- Messages
- 46 (0.01/day)
- Location
- CARLISLE,SOUTH CAROLINA
| System Name | WAITING ON AMD TO GET THERE S*** TOGETHER..... |
|---|---|
| Processor | INTEL C2D 6750 2.6GHZ> @3.2GHZ |
| Motherboard | MSI P6N-SLI PLATINUM |
| Cooling | STOCK INTEL HS+FAN 1-120 INTAKE 2- 80MM XHAUST |
| Memory | 2GB(2X1GB) PC6400/800MHZ 5-5-5-12 DUAL CHANNEL GSKILL |
| Video Card(s) | XFX 7900GS 525m xtreme PCI-E (next on the list) |
| Storage | WD 80gb sataI |
| Display(s) | HANNS-G 19" WIDESCREEN LCD *JW197DBP |
| Case | ANTEC-SILVER- P180 performance one case( and lovin it.....) |
| Audio Device(s) | auzentech X-Mystique 7.1 GOLD |
| Power Supply | Xnfinity 600w dual rail/flexforce R1/18A R2/20A |
| Software | WINDOWS XP PRO SP2/ SLIPPD :) |
spud i have the neo4-f(blk pcb rev1) were u able to just melt away the coating that was sealing it or what?gonna yank the hs off this board as its just sitting and i wanna try this out
- Joined
- Feb 12, 2007
- Messages
- 1,192 (0.18/day)
- Location
- scotland
| System Name | spuds K8-X2 |
|---|---|
| Processor | amd athlon X2 4200+ toledo s939 2794mhz 254x11 1.4 vcore |
| Motherboard | MSI K8N Neo4-F v1.0 (MS-7125) nforce4 sata2 mod, laptop cpu heatpipe copper nb cooler |
| Cooling | akasa evo "blue" + 90mm fan, 2x120mm front, 250mm side, 120mm rear, 120mm in psu, pci slot exhaust. |
| Memory | OCZ Platinum XTC DDR PC3200 4GB(4x1024) @254mhz 3-3-3-8 2T |
| Video Card(s) | sapphire HD3870 512mb GDDR4 vf900cu, several ramsinks on components / nvidia 7300gt 256mb secondary |
| Storage | hitachi 160gb (slightly fried) / hitachi 120gb ATA / Seagate 160gb / 2x ps3 seagate 60gb |
| Display(s) | CTX EX1300F 20" flat CRT, 1280x1024@100hz / 19" benq FP91G X / 19" hanns-g (all free) |
| Case | mesh server/gaming black case, 9x 5.25' drive bays, silvestone auto fan controller |
| Audio Device(s) | onboard realtek alc850 7.1/soundblaster LIVE! ct4780 + kxaudio - sony home theatre surround |
| Power Supply | winpower 650w, system draws around 470-500w under load(+all screens) |
| Software | win7 64bit |
| Benchmark Scores | ~16m trips/sec using mty trip generator. triple monitor gaming using SoftTH. 3840x1024 |
used one of these drill bits from an ink refill kit,
carefully drilled just enough to expose a small part of the solder underneath, or an art knife could do it, jus be careful scraping off the resin,
then quickly put a bit of solder on it, not sure if the resin melted though,
edit - while soldering there was a bit of white residue coming off the resin, looked a lot like what superglue does so i think it could be a similar substance.
carefully drilled just enough to expose a small part of the solder underneath, or an art knife could do it, jus be careful scraping off the resin,
then quickly put a bit of solder on it, not sure if the resin melted though,
edit - while soldering there was a bit of white residue coming off the resin, looked a lot like what superglue does so i think it could be a similar substance.
Last edited:
QuarterMain
New Member
- Joined
- Feb 8, 2008
- Messages
- 46 (0.01/day)
- Location
- CARLISLE,SOUTH CAROLINA
| System Name | WAITING ON AMD TO GET THERE S*** TOGETHER..... |
|---|---|
| Processor | INTEL C2D 6750 2.6GHZ> @3.2GHZ |
| Motherboard | MSI P6N-SLI PLATINUM |
| Cooling | STOCK INTEL HS+FAN 1-120 INTAKE 2- 80MM XHAUST |
| Memory | 2GB(2X1GB) PC6400/800MHZ 5-5-5-12 DUAL CHANNEL GSKILL |
| Video Card(s) | XFX 7900GS 525m xtreme PCI-E (next on the list) |
| Storage | WD 80gb sataI |
| Display(s) | HANNS-G 19" WIDESCREEN LCD *JW197DBP |
| Case | ANTEC-SILVER- P180 performance one case( and lovin it.....) |
| Audio Device(s) | auzentech X-Mystique 7.1 GOLD |
| Power Supply | Xnfinity 600w dual rail/flexforce R1/18A R2/20A |
| Software | WINDOWS XP PRO SP2/ SLIPPD :) |
thxs for the info spud, so happens i have one of those bits and an art knife in my poss. i got the hs off and it looks like its gonna work( if i dont bugger it up) funny thing is it looks like the sli bridges have been sealed( same as the pics) but theres only 1 pcix slot on this board? so thay just started sealing the chips altogether? or is there some magical way im unaware of to make this an sli board?prob not im sure but i had to ask
- Joined
- Feb 12, 2007
- Messages
- 1,192 (0.18/day)
- Location
- scotland
| System Name | spuds K8-X2 |
|---|---|
| Processor | amd athlon X2 4200+ toledo s939 2794mhz 254x11 1.4 vcore |
| Motherboard | MSI K8N Neo4-F v1.0 (MS-7125) nforce4 sata2 mod, laptop cpu heatpipe copper nb cooler |
| Cooling | akasa evo "blue" + 90mm fan, 2x120mm front, 250mm side, 120mm rear, 120mm in psu, pci slot exhaust. |
| Memory | OCZ Platinum XTC DDR PC3200 4GB(4x1024) @254mhz 3-3-3-8 2T |
| Video Card(s) | sapphire HD3870 512mb GDDR4 vf900cu, several ramsinks on components / nvidia 7300gt 256mb secondary |
| Storage | hitachi 160gb (slightly fried) / hitachi 120gb ATA / Seagate 160gb / 2x ps3 seagate 60gb |
| Display(s) | CTX EX1300F 20" flat CRT, 1280x1024@100hz / 19" benq FP91G X / 19" hanns-g (all free) |
| Case | mesh server/gaming black case, 9x 5.25' drive bays, silvestone auto fan controller |
| Audio Device(s) | onboard realtek alc850 7.1/soundblaster LIVE! ct4780 + kxaudio - sony home theatre surround |
| Power Supply | winpower 650w, system draws around 470-500w under load(+all screens) |
| Software | win7 64bit |
| Benchmark Scores | ~16m trips/sec using mty trip generator. triple monitor gaming using SoftTH. 3840x1024 |
on my board theres a 16x, 1x an an open ended x4 pcie, iv tested my gfx in the x4 an it worked fine, only tested 3dm01 though, not sure how sli would perform with a x16/x4 config.
Last edited: