AMD FX OC'ers Club

[YautjaLord]

cd! Johan! 'ssup guys.

This H105 - to say it's quiet is to say nothing basically. I don't hear it, neither in idle or in load (C:R @ 1920x1200 everything @ max). All CPU stuff @ Auto, C'n'Q - disabled, HPC - on. Time to get AS5 & 2nd Noctua's iPPC 2000RPM PWM fan & get sh*t rolling. Need help in setting all correct voltages & frequencies again, ffs. How high to set all this stuff for 4.4/4.5GHz so it won't fry CPU completely?

P.S. Johan, you lil Intel rebel you! jk Merry Carma:R-Goremass everyone.

 

[cdawall]

4.5ghz should be around 1.35-1.45 depending on CPU quality. Start around 1.4 and go up or down.

 

[eidairaman1]

Running 4.8GHz on a Scythe Ashura. I wonder if HPC mode is a limiting factor too...

For the rest of the Crowd, I read that in order to get 5GHz someone had to pump the Vcore to 1.53/54. I tried that, ran the CPUz benchmark and the rig shut off as the fans were starting to rev up. I'm wondering if my cooling isnt able to handle that voltage applied to the CPU or if i need direct cooling for the VRMs,

4.5ghz should be around 1.35-1.45 depending on CPU quality. Start around 1.4 and go up or down.

I didnt need to touch Vcore until I was in 4.6

ssup all. F*ck, long time have passed.

Got myself Corsair's H105. See if this puppy can handle 4.4 & than 4.5GHz. Gotta recall how high to set every f*ckin voltage, frequencies, settings, stuff - gonna be long & quite nerve wreckin ride. Got Noctua's iPPC PWM as well, 2000RPM 29.x decibel. One for now. Next Friday gonna buy 2nd one. HPC on, right? Will post some P95 pics next Friday.

This game's worth the OC:

Spoiler

 

[cdawall]

I didnt need to touch Vcore until I was in 4.6

1.35v should be roughly stock.

Memory load will also play a role in vcore requirements. Mine takes about .05v to be stable with 4 dimms vs 2.

 

[Athlonite]

1.35v should be roughly stock.

Memory load will also play a role in vcore requirements. Mine takes about .05v to be stable with 4 dimms vs 2.

I find I have to do that too but running 2400MHz DDR3 x2

 

[eidairaman1]

sorry for double post, i fixed, see above for a question as well

 

[cdawall]

I find I have to do that too but running 2400MHz DDR3 x2

High clocks and more memory are hell on these things. You can push just the IMC up as well, but I find if you push that to far above vcore it causes more issues than it fixes.

 

[YautjaLord]

Multi: 20.5;
CPU Frequency: 200MHz;
CPU voltage: 1.4v;
CPU/NB: 2400MHz;
HT: 2600MHz;
DRAM: 1600MHz;
DRAM Timings: Auto;
DRAM Voltage: 1.5v;
CPU/NB voltage: 1.2v;
VDDA: 2.5v;
Fan Speed: Standard; (barely can hear both of them spinning)
HPC: On/Enabled;
CPU Spread Spectrum: Enabled. (does it benefit anything?)

4.1GHz is doable, let's see how's 4.4 & then 4.5GHz do. Also gonna test this clock in C:R, SP & MP. Actually this & AvP3's MP as well.

 

[JrRacinFan]

Hi there @Johan45. Don't beleve we have met up before. Give that Intel rig some memory bandwith, even if the timings are extremely loose

@YautjaLord
I see you're doing well! Been a while ....

 

[YautjaLord]

@YautjaLord
I see you're doing well! Been a while ....

ssup, Jr! Yup, it was. Got myself Corsair's H105, testing this OC (4.1GHz) in Prime95, Carma:R (Carmageddon: Reincarnation) SP & MP & in AvP3's MP. So far no problems whatsoever, all of them run solid. Going for 4.2GHz right now actually. Will post results in about an hour from now.

 

[eidairaman1]

Seems the 8350 wont break 5.0GHz for me on Air, i turned off HPC, enabled LLc to extremes across the board, adjusted vcore to 1.49, nb voltages up minor, still locks on netflix. Its stable at 4.9 though. I dont think im gonna dump cash into wc until zen appears as this board, chip and ram are goin to the wife and ran at stock.

 

[YautjaLord]

Turned off by itself after almost 50 mins of run. I enter the room, see the message to check for HDMI signal on my T240, PC's not working, 4.2GHz is not doable for now. Maybe i'll test it throughout next week, Tuesday or Wednesday. 4.1GHz is my OC for now. What TIM would you recommend other than AS5? MX-4? Using H105's default TIM & cooling.

 

[cdawall]

The TIM isn't going to make a massive difference.

 

[YautjaLord]

Good TIM & fans will do, cd. ssup? Y u no play C:R? lol

Anyway, i'm @ 4.1GHz for now, every voltage & frequencies is in one of my prev posts. CPU temp hover between 40+ & lower degrees C. Will stick to that OC in P95, C:R & AvP3 for now. Next weekend (after all this New Year's rush & stuff) will go for AS5 & 2nd NF-F12 Noctua's fan.

P.S. RIP Lemmy.

Sorry for OT, but it's definitely sad sh*t for me especially since i saw band in Wacken 2009 & it was f*ckin awesome!!!!! Cheers all, drink responsibly in small quantities. lol

 

[ASOT]

Multi: 20.5;
CPU Frequency: 200MHz;
CPU voltage: 1.4v;
CPU/NB: 2400MHz;
HT: 2600MHz;
DRAM: 1600MHz;
DRAM Timings: Auto;
DRAM Voltage: 1.5v;
CPU/NB voltage: 1.2v;
VDDA: 2.5v;
Fan Speed: Standard; (barely can hear both of them spinning)
HPC: On/Enabled;
CPU Spread Spectrum: Enabled. (does it benefit anything?)

4.1GHz is doable, let's see how's 4.4 & then 4.5GHz do. Also gonna test this clock in C:R, SP & MP. Actually this & AvP3's MP as well.

@YautjaLord CnQ,C1E,C6,Virtualization,Spread Spectrum,LLC for CPU & NB disabled
Spread Spectrum disabled for better OC
Also disable fan control..NB can cause error and conflicts,set them default NB 2200/HT 2600
Try up multiply and vcore voltage between 1.3-1.45v for safe working...

 

[cdawall]

Well my opterons seem to overclock ok

 

[ASOT]

Here end's my FX 8300 AM3+ ...moving to Skylake and DDR 4

I will change mobo,cpu & ram...@specs remain the same

Just receive new mobo ASUS Z170-A & tomorrow will buy RAM

 

[JrRacinFan]

Joining up late to the party, moving up to an fx 6100. Anything I should note coming from say a 555 Black?

 

[YautjaLord]

Bought AS5, still at 4.1GHz though. Will try to do what ASOT suggested throughout next week, C1E, C6 State, C'n'Q & rest disabled though, HPC enabled. Fan control disabled? What are you talking about? Will order Noctua's NF-F12 this Sunday. Hopefully. Working with construction materials is quite "hazardous" to your lower back, legs & lungs, later in case & you don't use mask to block the dust from getting to your nostrils n sh*t. Also you get pretty f*ckin tired, sorry for OT.

P.S. Another Intel rebel? I'm here for Zen, good luck to you ASOT with whatever you picked. Q2 2016 is the release date, right? Enough time to save for one with the job i got.

 

[ASOT]

@YautjaLord Ty,AM3+ is dying fast..also ddr 3

Fan disabled to work at full rpm,no monitoring ..

HPC DISABLED High Performance Computing to ensure more room for OC,more stable OC,no issue

Goodluck!

 

[JrRacinFan]

PS. Another Intel rebel? I'm here for Zen, good luck to you ASOT with whatever you picked. Q2 2016 is the release date, right? Enough time to save for one with the job i got

Not necessarily. I just like to play with different hardware. Been on AM3, s775, s1366, s1156 and still using s1155 & AM2+ hardware. Yes I am amped for Zen!!!

PS: Sorry for the off topic fellahs.

 

[YautjaLord]

Not necessarily. I just like to play with different hardware. Been on AM3, s775, s1366, s1156 and still using s1155 & AM2+ hardware. Yes I am amped for Zen!!!

PS: Sorry for the off topic fellahs.

Meant ASOT moved to Skylake & DDR 4. lol Nevermind, guy replied. Also great collection of sockets, mobos or however you'd call it, Jr.

And sorry for 2nd off-topic. Will keep this thread updated as soon as start to fiddle with stuff after eventually purchasing 2nd NF-F12. Will happen throughout this week.

P.S. Remember Lemmy, preferably loud. Cheers.

 

[JrRacinFan]

I knew who you replying to. ;-) @YautjaLord

 

[YautjaLord]

I knew who you replying to. ;-) @YautjaLord

lol

No prob. One question though: what's the real cause of keepin all prev mobos n sh*t beside nostalgia? I still got the AM3/nforce 980a SLI one by ASUS, wonderin why i'd really like to keep it for. Gathers dust & stuff, inside one of my shelves. Sorry for yet another OT.

 

[JrRacinFan]

I've sold off 95% of the older boards. I like to see what I can accomplish out of the older hardware through overclocking.