Ram Speed questions!

Caring1 · Aug 18, 2016

INSTG8R said:
Well if you multiply that by 2 you have your answer. So no it seems not. Are you using the XMP profile?

Isn't that only for Dual channel?
Triple channel multiply by 3, and it's overclocked to around 2.2MHz.
You could try changing the FSB : Dram ratio.

FireFox · Aug 18, 2016

Caring1 said:
Triple channel multiply by 3, and it's overclocked to around 2.2MHz.

That's exactly what i said in one of my previous post, but they said it's wrong.

INSTG8R · Aug 18, 2016

Caring1 said:
Isn't that only for Dual channel?
Triple channel multiply by 3, and it's overclocked to around 2.2MHz.
You could try changing the FSB : Dram ratio.

RAM runs a "Double Data Rate"(get it? DDR) No matter the configuration. Single, Dual, Triple, Quad, makes no difference in it's actual speed.

eidairaman1 · Aug 18, 2016

INSTG8R said:
Well if you can't use the XMP profile then it will just run the "standard JDEC profile" so that is what you are getting. Only thing you can do is write down all the XMP timings from the SPD Tab and put them in yourself if you want the advertised speeds.

This board uses a non uefi bios- the user manual is pretty sparce for a overclockers/enthusiast board, even ASRock and Asus manuals are more detailed.

The only places I could suggest is Memory configuration.

FireFox · Aug 18, 2016

I should be soon at home i will post a few Bios pics.

FireFox · Aug 18, 2016

@bogmali you're making me things difficult :slap:

INSTG8R · Aug 18, 2016

eidairaman1 said:
This board uses a non uefi bios- the user manual is pretty sparce for a overclockers/enthusiast board, even ASRock and Asus manuals are more detailed.

The only places I could suggest is Memory configuration.

Well XMP has been around long before UEFI but it only goes back so far and only was available with later chipsets

eidairaman1 · Aug 18, 2016

INSTG8R said:
Well XMP has been around long before UEFI but it only goes back so far and only was available with later chipsets

I Know XMP was around during Core 2. There has to be more configuration options than that manual has.

INSTG8R · Aug 18, 2016

eidairaman1 said:
I Know XMP was around during Core 2. There has to be more configuration options than that manual has.

Well it being a "server chip" oriented board it may just not be an option? Not like you would be buying ECC RAM with XMP for example.

Agentbb007 · Aug 18, 2016

Caring1 said:
Isn't that only for Dual channel?
Triple channel multiply by 3, and it's overclocked to around 2.2MHz.

You're confusing memory channels and memory data rate they are two separate technologies.

Theoretically, dual-channel configurations double the memory bandwidth when compared to single-channel configurations. This should not be confused with double data rate (DDR) memory, which doubles the usage of DRAM bus by transferring data both on the rising and falling edges of the memory bus clock signals.

DDR should not be confused with dual channel, in which each memory channel accesses two RAM modules simultaneously. The two technologies are independent of each other and many motherboards use both, by using DDR memory in a dual channel configuration.

FireFox · Aug 18, 2016

Bios Settings

Ram timings

Voltage configuration

Voltage configuration # 2

Some tweaks that i don't know what they are for

Memory configuration

Memory configuration 2

I guess Memory configuration 3

CAPSLOCKSTUCK · Aug 18, 2016

Which BIOS are you using?

http://drivers.softpedia.com/blog/E...sion-A58-for-the-Classified-SR-2-349426.shtml

FireFox · Aug 18, 2016

CAPSLOCKSTUCK said:
Which BIOS are you using?

http://drivers.softpedia.com/blog/E...sion-A58-for-the-Classified-SR-2-349426.shtml

A58

bogmali · Aug 18, 2016

I fired up my X5680's last night and I am still playing with the settings since it dumped my old ones when I went to load A56 BIOS :banghead:

I'll post some screenies once I get my stable settings back.

FireFox · Aug 18, 2016

bogmali said:
I fired up my X5680's last night and I am still playing with the settings since it dumped my old ones when I went to load A56 BIOS

I'll post some screenies once I get my stable settings back.

Agentbb007 · Aug 18, 2016

The BIOS only lists DDR-1333 so do you need to overclock the RAM for speeds higher then 1333? This thread has SR-2 owners talking about overclock settings so maybe it can help you out. https://hardforum.com/threads/sr-2-optimization-thread.1541357/
Have you tried playing with the CPU Frequency Setting to see if that changes your RAM speed?

Slizzo · Aug 18, 2016

Check your DIMM voltages, you're running your 1.5v memory at 1.65v!

Force the DIMM voltages down to 1.5V in BIOS, and set memory speeds to 14x (1867MHz), then set your timings to what G.Skill rates the memory at.

Agentbb007 · Aug 18, 2016

Slizzo said:
set memory speeds to 14x (1867MHz)

Setting the CPU Uncore Frequency (Mhz) to 1867 Mhz (14 X) changes the memory frequency? Or were you referring to another setting?
I thought the only way to overclock ram on this mobo was by upping the CPU Frequency Setting? Is CPU Frequency Setting the same as BCLK?

INSTG8R · Aug 18, 2016

Slizzo said:
Check your DIMM voltages, you're running your 1.5v memory at 1.65v!

Force the DIMM voltages down to 1.5V in BIOS, and set memory speeds to 14x (1867MHz), then set your timings to what G.Skill rates the memory at.

Nothing unusual there my XMP Profile for 2400 is 1.65v most "OC profiles" are. 1.65 was actually the Default voltage for that chipset anyways.

Edit: You see mine uses 1.65 on the XMP. His chipset is actually that by default, He would be undervolting for his setup at 1.5V.

Agentbb007 · Aug 19, 2016

INSTG8R said:
Nothing unusual there my XMP Profile for 2400 is 1.65v most "OC profiles" are. 1.65 was actually the Default voltage for that chipset anyways.

Edit: You see mine uses 1.65 on the XMP. His chipset is actually that by default, He would be undervolting for his setup at 1.5V.

Just to offer another idea, the sticker on the ram does say 1.50V. And his CPU-Z shows 1.50V for all in the timings table.
G.Skill shows a Tested Speed 1866Mhz at 1.50V http://www.gskill.com/en/product/f3-14900cl9d-8gbxl
Also on NewEgg it shows his DDR3 1866 with 1.5V - http://www.newegg.com/Product/Product.aspx?Item=N82E16820231455

But I'm no ram expert so INSTG8R could be right and 1.65V is the best voltage. :ohwell:

eidairaman1 · Aug 19, 2016

INSTG8R said:
Nothing unusual there my XMP Profile for 2400 is 1.65v most "OC profiles" are. 1.65 was actually the Default voltage for that chipset anyways.

Edit: You see mine uses 1.65 on the XMP. His chipset is actually that by default, He would be undervolting for his setup at 1.5V.

My ram at 2400 calls for 1.65 as well.

By the way perhaps on intel for ecc and xmp, on Amd there is ecc and xmp lol

I think those are ram profiles. You had there knoxx29, id leave memory 1 and 2 at auto and try 3.

Caring1 · Aug 19, 2016

Agentbb007 said:
Setting the CPU Uncore Frequency (Mhz) to 1867 Mhz (14 X) changes the memory frequency? Or were you referring to another setting?
I thought the only way to overclock ram on this mobo was by upping the CPU Frequency Setting? Is CPU Frequency Setting the same as BCLK?

Changing the MCH strap will overclock ram too (Memory Controller Hub)

Caring1 · Aug 19, 2016

INSTG8R said:
RAM runs a "Double Data Rate"(get it? DDR) ....

Could you try to be a bit more condescending? :slap:

Agentbb007 said:
Just to offer another idea, the sticker on the ram does say 1.50V. And his CPU-Z shows 1.50V for all in the timings table.
G.Skill shows a Tested Speed 1866Mhz at 1.50V http://www.gskill.com/en/product/f3-14900cl9d-8gbxl
Also on NewEgg it shows his DDR3 1866 with 1.5V - http://www.newegg.com/Product/Product.aspx?Item=N82E16820231455

But I'm no ram expert so INSTG8R could be right and 1.65V is the best voltage.
View attachment 78033

It's possible that he needs an earlier model Ram that is meant to run at 1.65V, from Ivy Bridge chip set onwards voltages reduced to 1.5V.

FireFox · Aug 19, 2016

Caring1 said:
It's possible that he needs an earlier model Ram that is meant to run at 1.65V, from Ivy Bridge chip set onwards voltages reduced to 1.5V.

RAM is set at 1.65V in in the bios.

Caring1 · Aug 19, 2016

G.Skill only lists up to DDR3 1600 in triple channel kits, and the command rate should be set to 2.
1866 should work, i'd love to get my hands on one to try it.

System Name	H7 Flow 2024
Processor	AMD 5800X3D
Motherboard	Asus X570 Tough Gaming
Cooling	Custom liquid
Memory	32 GB DDR4
Video Card(s)	Intel ARC A750
Storage	Crucial P5 Plus 2TB.
Display(s)	AOC 24" Freesync 1m.s. 75Hz
Mouse	Lenovo
Keyboard	Eweadn Mechanical
Software	W11 Pro 64 bit

Processor	Intel i7 10700K
Motherboard	Asus ROG Maximus XII Hero
Cooling	2x Black Ice Nemesis GTX 480 - 1x Black Ice Nemesis GTX 420 - D5 VPP655P - 13x Corsair LL120 - LL140
Memory	32GB G.SKILL Trident Z RGB 3600Hz
Video Card(s)	EVGA GEFORCE RTX 3080 XC3 Ultra
Storage	Samsung 970 EVO PLUS 500GB/1TB - WD Blue SN550 1TB - 2 X WD Blue 1TB - 3 X WD Black 1TB
Display(s)	Asus ROG PG278QR 2560x1440 144Hz (Overclocked 165Hz )/ Samsung
Case	Corsair Obsidian 1000D
Audio Device(s)	I prefer Gaming-Headset
Power Supply	Enermax MaxTytan 1250W 80+ Titanium
Mouse	Logitech G502 spectrum
Keyboard	Virtuis Advanced Gaming Keyboard ( Batboard )
Software	Windows 10 Enterprise/Windows 10 Pro/Windows 11 Pro
Benchmark Scores	My PC runs FiFA

System Name	Hellbox 5.1(same case new guts)
Processor	Ryzen 7 5800X3D
Motherboard	MSI X570S MAG Torpedo Max
Cooling	TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory	2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s)	Powercolor Hellhound 7900XTX
Storage	970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s)	Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case	TT Kandalf L.C.S.
Audio Device(s)	Soundblaster ZX/Logitech Z906 5.1
Power Supply	Seasonic TX~’850 Platinum
Mouse	G502 Hero
Keyboard	G19s
VR HMD	Oculus Quest 3
Software	Win 11 Pro x64

System Name	PCGOD
Processor	AMD FX 8350@ 5.0GHz
Motherboard	Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling	Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory	16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s)	AMD Radeon 290 Sapphire Vapor-X
Storage	Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s)	NEC Multisync LCD 1700V (Display Port Adapter)
Case	AeroCool Xpredator Evil Blue Edition
Audio Device(s)	Creative Labs Sound Blaster ZxR
Power Supply	Seasonic 1250 XM2 Series (XP3)
Mouse	Roccat Kone XTD
Keyboard	Roccat Ryos MK Pro
Software	Windows 7 Pro 64

Processor	Intel i7 10700K
Motherboard	Asus ROG Maximus XII Hero
Cooling	2x Black Ice Nemesis GTX 480 - 1x Black Ice Nemesis GTX 420 - D5 VPP655P - 13x Corsair LL120 - LL140
Memory	32GB G.SKILL Trident Z RGB 3600Hz
Video Card(s)	EVGA GEFORCE RTX 3080 XC3 Ultra
Storage	Samsung 970 EVO PLUS 500GB/1TB - WD Blue SN550 1TB - 2 X WD Blue 1TB - 3 X WD Black 1TB
Display(s)	Asus ROG PG278QR 2560x1440 144Hz (Overclocked 165Hz )/ Samsung
Case	Corsair Obsidian 1000D
Audio Device(s)	I prefer Gaming-Headset
Power Supply	Enermax MaxTytan 1250W 80+ Titanium
Mouse	Logitech G502 spectrum
Keyboard	Virtuis Advanced Gaming Keyboard ( Batboard )
Software	Windows 10 Enterprise/Windows 10 Pro/Windows 11 Pro
Benchmark Scores	My PC runs FiFA

System Name	The Mini Nuke
Processor	Intel i9-9900K at 4.9GHz -1AVX Vffset 1.27V
Motherboard	Asus Maximus XI Hero WiFi
Cooling	NZXT - Kraken X62 Liquid CPU Cooler
Memory	G.SKILL TridentZ 32 GB (4 x 8 GB) DDR4-4000 Memory Model F4-4000C17Q-32GTZRB
Video Card(s)	ASUS RTX 3080 TUF-RTX3080-O10G-GAMING
Storage	Samsung 850 EVO 500GB SSD, Intel 660p M.2 2280 2TB NVMe
Display(s)	1 LG 27GL850-B and 2 ROG Swift PG278Q
Case	NZXT - H700 (Black) ATX Mid Tower Case
Power Supply	EVGA SuperNOVA 1000 P2 - 1000W Platinum
Mouse	Razer Naga Trinity
Keyboard	Razer BlackWidow Chroma
Software	Windows 10 Pro

System Name	Party On
Processor	Xeon w 3520
Motherboard	DFI Lanparty
Cooling	Big tower thing
Memory	6 gb Ballistix Tracer
Video Card(s)	HD 7970
Case	a plank of wood
Audio Device(s)	seperate amp and 6 big speakers
Power Supply	Corsair
Mouse	cheap
Keyboard	under going restoration

System Name	Daily Driver/Part Time
Processor	Core i7-13700K/Ryzen R5-7600
Motherboard	ASUS ROG MAXIMUS Z790 APEX/Asrock B650 Pro RS Wi-Fi
Cooling	Corsair H150i RGB PRO XT AIO/Deep Cool LS-520 White
Memory	G-Skill Trident Z5 Silver 2x24GB DDR5-8200/XPG Lancer Blade 2X16GB DDR-5-6000
Video Card(s)	MSI Ventus 3X OC RTX-4080 Super/Sapphire Radeon RX-7800XT
Storage	Samsung 980 Pro M.2 NVMe 2TB/KingSpec XG 7000 4TB M.2 NVMe/Crucial P5 Plus 2TB M.2 NVMe
Display(s)	Alienware AW3423DW
Case	Corsair 5000d AirFlow/Asus AP201 White
Audio Device(s)	AudioEngine D1 DAC/Onboard
Power Supply	Seasonic Prime Ultra 1K Watt/Seagotep 750W
Mouse	Corsair M65 RGB Elite
Keyboard	Adata XPG Summoner
Software	Win11 Pro 64
Benchmark Scores	Xbox Live Gamertag=jondonken

Processor	Ryzen 9 7950X3D
Motherboard	MSI X670E MPG Carbon Wifi
Cooling	Custom loop, 2x360mm radiator,Lian Li UNI, EK XRes140,EK Velocity2
Memory	2x16GB G.Skill DDR5-6400 @ 6400MHz C32
Video Card(s)	EVGA RTX 3080 Ti FTW3 Ultra OC Scanner core +750 mem
Storage	MP600 Pro 2TB,960 EVO 1TB,XPG SX8200 Pro 1TB,Micron 1100 2TB,1.5TB Caviar Green
Display(s)	Alienware AW3423DWF, Acer XB270HU
Case	LianLi O11 Dynamic White
Audio Device(s)	Logitech G-Pro X Wireless
Power Supply	EVGA P3 1200W
Mouse	Logitech G502X Lightspeed
Keyboard	Logitech G512 Carbon w/ GX Brown
VR HMD	HP Reverb G2 (V2)
Software	Win 11

Ram Speed questions!

The Power Of Intel

Vanguard Beta Tester

The Exiled Airman

The Power Of Intel

The Power Of Intel

Vanguard Beta Tester

The Exiled Airman

Vanguard Beta Tester

The Power Of Intel

Spaced Out Lunar Tick

The Power Of Intel

In Orbe Terrum Non Visi

The Power Of Intel

Vanguard Beta Tester

The Exiled Airman

The Power Of Intel