• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Unlocked Realtek HD Audio Drivers Windows 7 & 8 (With Dolby Digital Live and DTS Interactive)

and FYI it is one of the latest available Realtake drivers
 
dvojinov said:
It should work I have confirmation it does work with this chip , you obvious don't read because you would see the post where it is confirmed and you wouldn't have to fuck around with patching , test modes and other BS . Try the drivers I modified using the patcher created by PHYTO .

ALL you have to do is to install them normally as any other normal driver you would , ALLOW UNCERTIFIED DRIVER when asked and then after all is done apply te DWORD32 in regedir :
The DRIVER : http://sharemods.com/ct89upig9f92/realtek_hda_8059_dolbyHPhonesDTSrdy.rar.html

1. without messing with shit and that or similar run the INSTALLATION it will be in 2 stages:
- STAGE1 the driver will automatically uninstall existing driver and ask for reboot > do so
- STAGE2 back in windows INSTALLATION will start at some point a RED WINDOW WILL POP UP about UNCERTIFIED driver and SHIT say >>YES <<< the installation will complete asking for reboot SAY >>>NO <<<
2. while still in WINDOSWS open regedit and execute :
1. After installation, open Run, type in "regedit" without quotes. Go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Audio". Add "DisableProtectedAudioDG" of DWORD (32bit value) type and set it to 1.
2. Restart normally.

After this reboot you should be set with DTS-I and DDL and all that beautiful shit IF BY ANY CHANCE is not check REGEDIT and if the DWORD is there and set to 1 , if you followed everything and still dont have it then you are one unfortunate guy ..yes It works basically only with OPTICAL OUT or DIGITAL OUT

It may happen that you start circle in a loop with uninstall-install-reboot if that happens 3 times in a row ..break the loop by stopping the installation then you have to do a complete manual uninstall and installation procedure which is just a bit more annoying but not a big deal.

Have fun !
Click to expand...

Thank you, bot it working now. I made the mistake to add DisableProtectedAudio and not DisableProtectedAudioDG.

Really great!
 
Grinchy said:
Thank you, bot it working now. I made the mistake to add DisableProtectedAudio and not DisableProtectedAudioDG.

Really great!
Click to expand...

Fantastic ! Im glad you got it working !
 
People I just made a MOD Driver on Realtek by enabling SRS Premium Sound. This is valid for Windows Vista, 7, 8, 8.1 and 10 (in my case). Follow the link below.

https://1drv.ms/u/s!Avmj2CMC-f2boHnScN-5QGt52_w9

TIP 1: Working on all Windows 10 versions.
TIP 2: On Windows 8, 8.1 or 10 you need to uninstall your Realtek installed driver and turn off Driver Signature Enforcement.

Driver Version: 6.0.1.8035
 

Attachments

  • Capturar.JPG
    Capturar.JPG
    76 KB · Views: 1,709
  • Capturar_1.JPG
    Capturar_1.JPG
    39.7 KB · Views: 1,639
  • Sem_titulo.jpg
    Sem_titulo.jpg
    212.7 KB · Views: 1,344
Alan Finote said:
People I just made a MOD Driver on Realtek by enabling SRS Premium Sound. This is valid for Windows Vista, 7, 8, 8.1 and 10 (in my case). Follow the link below.

https://1drv.ms/u/s!Avmj2CMC-f2boHnScN-5QGt52_w9

TIP 1: Working on all Windows 10 versions.
TIP 2: On Windows 8, 8.1 or 10 you need to uninstall your Realtek installed driver and turn off Driver Signature Enforcement.

Driver Version: 6.0.1.8035
Click to expand...
This worked in 15031, but I did not like the presets' quality, awful sound. It looks like just a worst version of DHT.

Thanks anyway for your effort.
 
Last edited:
TrancëJay said:
This worked in 15031, but I did not like the presets' quality, awful sound. It looks like just a worst version of DHT.

Thanks anyway for your effort.
Click to expand...

There is a good reason for this ,SRS is pure software solution and depends on main CPU & CPU accelerated technology while in other hand DDL and DTS-I are hardware solutions and use the Encoding capabilities directly from on-board Audio Chip thus reduce lag and increase overall performance .
Also the sound quality is higher as it is real-time encoding and for DTS-I Neo6 combination you will have 24bit/96Khz stream all the time everything will be hardware upscale to this stream no matter the original source and channels.
Before there was a downside as it infused some lag as it needs time to process however this was 10-12 years ago today the processing power is 50x greater and the lag issue is actually gone .
The same goes for DDL however here you will always have 16bit/48Khz stream .
Also the quality of the Encoders and upscale algorithms improved at even greater scale then the pure processing power of Audio processors so when ever you can you should use your hardware solution way before jumping to software solution .
 
dvojinov said:
OK people who want here is one of the latest modified and Install ready driver , remeber you still have to do the DWORD entry in regedit and you have to ALLOW uncertified driver to install :
TEST MOD is NOT neceserry

http://sharemods.com/ct89upig9f92/realtek_hda_8059_dolbyHPhonesDTSrdy.rar.html

1. After installation, open Run, type in "regedit" without quotes. Go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Audio". Add "DisableProtectedAudioDG" of DWORD (32bit value) type and set it to 1.
2. Restart normally.

good luck !

credits also goes to PHYTO and his patcher :)
Click to expand...
I have no idea what you have done in this, but it worked in the lnsider Build. Thank you very much.
 
TrancëJay said:
I have no idea what you have done in this, but it worked in the lnsider Build. Thank you very much.
Click to expand...
Interesting , good to know , Im glad it work for you even on Insider built , I do not mess with that , stopped long time ago I did my part :D
 
dvojinov said:
Interesting , good to know , Im glad it work for you even on Insider built , I do not mess with that , stopped long time ago I did my part :D
Click to expand...

This driver doesn't function at all on my computer. Insider build 14986. Device Manager says it may be corrupt (generic error). Code 39. Object name not found.

Edit: I installed R281 and pulled the dll from your files, and it is the modified version, but I got the Failed Test Tone as expected. (and won't let me use them).
 
Last edited:
well I dont know with this shit insider release it surly does work for me and few other guys , there it is no guarantee it will work for everyone , and there is also install method , did you try manual uninstall and re-install without the installer ? dont know how the DWORD32 works on this release but without it I suppose no dice !
 
Jgr9 said:
This driver doesn't function at all on my computer. Insider build 14986. Device Manager says it may be corrupt (generic error). Code 39. Object name not found.

Edit: I installed R281 and pulled the dll from your files, and it is the modified version, but I got the Failed Test Tone as expected. (and won't let me use them).
Click to expand...

Upgrade to 15048.
 
I signed up!! I've been watching this thread and i can say without a certain it doesn't work on my MSI P67A board with Realtek ALC892 on Windows 10 INsider 15048 (Latest)

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Object Name not found.

I followed all directions given to me by dvojinov :) I will keep following this thread and tinkering :D Thanks for the good work nonetheless.

Edit: I tryed installing it again but this time the old fashion manually way.. and still same results. :)
 
Last edited:
TrevBlu19 said:
I signed up!! I've been watching this thread and i can say without a certain it doesn't work on my MSI P67A board with Realtek ALC892 on Windows 10 INsider 15048 (Latest)

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Object Name not found.

I followed all directions given to me by dvojinov :) I will keep following this thread and tinkering :D Thanks for the good work nonetheless.

Edit: I tryed installing it again but this time the old fashion manually way.. and still same results. :)
Click to expand...

Friend, to install this driver package in Windows 10, first uninstall the package you are currently using, go to Settings> Update and Security> Recovery and in ADVANCED INITIALIZATION click Restart Now.

From there you go to Advanced Options> Startup Settings and click Restart Now.

You will notice that before loading the system will appear boot options (Security Mode, etc.) press the number key 7 (DISABLE DRIVER SIGNATURE ENFORCEMENT) and wait for the system boot.

After that, just install the driver package. But ATTENTION: you will see a digital driver signature warning box; Click INSTALL THIS DRIVER SOFTWARE and continue the installation normally.

After the installation is complete, restart your computer again.

Then just enjoy the features of the SRS.
 
Yup... Just got 15048. Not working and won't let me use them. (not supported by device and failed test tone.) MSI & ALC892. (Except for movies/DVDs which can still work if set up properly.)

I fear that perhaps either the security has been improved or moved. In that case (if it's not fixed by public release again, which I don't think it will be this time), then we need somebody who knows how to mod these things... if it's even still possible. Seems.... kinda unlikely by this point. Especially not until after public release.


I also advize that you don't enable Spatial Sound for a surround sound output (at least not for now). They (surround and spatial) do not work together, at least not with Microsoft's version. Spatial is only stereo for some reason (and can cause some weirdness and reverts in your settings that do not appear unless you completely close out of the specific device options (apply and ok buttons be damned), and make sure to re-check your Configure Speakers if you're using analog or HDMI).
 
Last edited:
Jgr9 said:
Yup... Just got 15048. Not working and won't let me use them. (not supported by device and failed test tone.) MSI & ALC892. (Except for movies/DVDs which can still work if set up properly.)

I fear that perhaps either the security has been improved or moved. In that case (if it's not fixed by public release again, which I don't think it will be this time), then we need somebody who knows how to mod these things... if it's even still possible. Seems.... kinda unlikely by this point. Especially not until after public release.


I also advize that you don't enable Spatial Sound for a surround sound output (at least not for now). They (surround and spatial) do not work together, at least not with Microsoft's version. Spatial is only stereo for some reason (and can cause some weirdness and reverts in your settings that do not appear unless you completely close out of the specific device options (apply and ok buttons be damned), and make sure to re-check your Configure Speakers if you're using analog or HDMI).
Click to expand...

or you installed to many of this drives and some leftover where left causing some unexpected conflicts on your systems , either registry related or other , I saw this a lot during insider testing period not only with audio devices but with others to , it may be just your system.
 
ofcourse not , silly of me to think that way .
 
Work on build 15088?
 
Last edited:
Just tried newest build 15060 with dvojinovs pack above and it gets even worse. After instaling patched driver and placing registry as usual , there is not even dtd/dolby option in playback device properties dropdown, only 2ch to choose. Thats it i guess :(
 
I'd still advise doing it manually (Pg 37), but yes, it most likely still doesn't work. To me it still seems like the mod done properly still successfully mods it, but optical surround default formats are still broken for most everyone, including legitimate licensed users. (At least that's what I still think.) However, Dolby/DTS movies/DVDs can still work. It's something Microsoft has to fix yet again, and who knows if and when that'll ever happen. I'm thinking after 3 broken Insider periods/years, this one's gonna go public.

If it does get fixed for the public release... then god damnit I'm done with Insider if this is gonna keep happening every year.

On top of that for me, Sony broke surround in one of my games on PS4, at least, with Firmware 4.50. Both HDMI and optical, so... hooray. ...

You know... it seems like both of these are because of the updated push for binaural audio for use with Hololens and Sony's PSVR.... And they just break other stuff along the way. I'm sure it's a massive patchjob by now.
 
Last edited:
You must log in or register to reply here.
Back
Top