Xeon Owners Club

[lyra]

westmere xeons have a soldered IHS yeah?

 

[FireFox]

westmere xeons have a soldered IHS yeah?

Otherwise i would have Delidded it long time ago

Btw guys i am looking for a Xeon X5698 2 cores 4.4GHZ stock.

 

[lyra]

I might try and delid my cheapy e5520 but i wont just use the vice method then lol

 

[CAPSLOCKSTUCK]

Btw guys i am looking for a Xeon X5698 2 cores 4.4GHZ stock.

i found one for you in Germany..............

http://www.ebay.co.uk/itm/Intel-Xeo...787662?hash=item3af020d8ce:g:3k8AAOSwWWxY-Ke3

 

[FireFox]

i found one for you in Germany..............

http://www.ebay.co.uk/itm/Intel-Xeo...787662?hash=item3af020d8ce:g:3k8AAOSwWWxY-Ke3

I saw that one but it's too expensive, money it's not the problem but too expensive.

 

[HUSKIE]

got xeon e5-2630 v3 es version running custom water cooling triple rad ek supremacy block on msi x99a pro gaming motherboard. the problem is the cpu runs hot? i've got 50c on idle then when stressing got 58-60c is it normal?

 

[FireFox]

got xeon e5-2630 v3 es version running custom water cooling triple rad ek supremacy block on msi x99a pro gaming motherboard. the problem is the cpu runs hot? i've got 50c on idle mode then 58-60c underload.. is it normal?

Honestly i don't understand those temperatures, 50c idle and 58-60c underload plus it's Watercooled

 

[lyra]

What case? How is your airflow?

 

[HUSKIE]

Fractal design d5 with side window panel 2x140 front,1x140 bottom 3x120mm on rad sitting in front and 140mm for exhaust. Thanks

 

[FireFox]

Is it overclocked, if yes how much voltage are you using?

 

[HUSKIE]

nope, stock speed.

Edited:
also i tried corsair h100i aio cooler and there is no difference anyway...

 

[lyra]

D5s do have terrible airflow cause of the closed front.

I guessed it was this cause you only had a 10 degree rise in temps so i wouldnt say its a component overheating problem.

You can either ramp uo your fans ot get a new case but really the temps arent dangerous so id leave it

 

[FireFox]

nope, stock speed.

Edited:
also i tried corsair h100i aio cooler and there is no difference anyway...

It's just a 2.4GHz stock and turbo boost 3.20GHz, 85W 22nm, it can't be possible that it runs hotter than my X5690 32nm at 4.7GHZ 1.44V+ and1.458V underload, if you have an ambient temperature between 35-40c then that would be OK otherwise those temperatures are absurd, I don't think that a H100i will be better than a custom watercooler, but that's just my opinion.

Edit: I am using just 4 fans, 3 X 14mm front one 120mm exhaust.

Do you mind to post a pic of your Machine?

 

[HUSKIE]

and here is the aio cooler

Look at into display 50c ... i have 9 fans inside the case

Here:

 

[FireFox]

and here is the aio cooler
View attachment 92767 Look at into display 50c ... i have 9 fans inside the case

Here:View attachment 92764

What thermal paste are you using and did you try removing the CPU and reinstall it once again?

Yeap, that surprised me 9 fans and those high temps.

 

[HUSKIE]

I used arctic Mx paste and I re seat the CPU. Updated the bios but that's make no difference.

 

[FireFox]

I used arctic Mx paste and I re seat the CPU. Updated the bios but that's make no difference.

Are the voltages Auto, can you post a screenshot of HWmonitor?

 

[HUSKIE]

Yes auto...

here is my water cooling parts were installed in my system yesterday

 

[FireFox]

As said before post a HWmonitor screenshot please.

 

[HUSKIE]

 

[FireFox]

View attachment 92771

I need to see the voltages too

 

[HUSKIE]

 

[FireFox]

View attachment 92772

The voltages are fine, you're using a good thermal paste and the Machine is Watercooled, i don't get what the hell is wrong.

Btw, this is a copy and paste from another forum.

54°C is excellent. Ideally you should keep them below 80°C at full load, but they shouldn't throttle until they get close to 100°C.

How high are your room's temps

 

[HUSKIE]

So it means my custom water cooling is useless now.

And here is the screenshot with aida 64 when stressing abit confused

 

[FireFox]

So it means my custom water cooling is useless now.

And here is the screenshot with aida 64 when stressing abit confused

View attachment 92773

It's not useless at all there should be an explanation for all this, wait for @CAPSLOCKSTUCK or @dorsetknob maybe they can provide you others solutions, btw, maybe i am mistaken but you're doing the stress test wrong, run just FPU test.