Bossweed16pipes
New Member
- Joined
- Apr 20, 2006
- Messages
- 47 (0.01/day)
- Location
- Montevideo
| Processor | Athlon X2 3800@2.5Ghz |
|---|---|
| Motherboard | ASUS M2N SLI Deluxe |
| Cooling | Zalman CNPS 9550AM2 nForce edition |
| Memory | 2 GB DDR2 Supertalent 800@1000Mhz DC |
| Video Card(s) | Sapphire X1900XT |
| Storage | 2x 250Gb Hitachi Sata2 Raid 0 + 80Gb WD Ide7200Rpm |
| Display(s) | Viewsonic VX922 |
| Case | Custom case |
| Audio Device(s) | Onboard SoundMax audio |
| Power Supply | PK 780W |
To view this case mod, go here.
Specs:
A64X2 3800 @4800 // Zalman CNPS9500 // Asus M2N SLI Deluxe // 2GB DDR2 SuperTalent DC 800 @1000mhz // X1900XT // 2x250Gbs Hitachi sata2 Raid0 + 80Gbs WD // TT PurePower 550W modular // VX922 // Logitech G7 // RumblePad2 Wireless
Mods:
Painted it black in a car paint shop and take out the 3 1/2 bay plates and replaced with a plastic cover. I painted the interior in mate black. Made a couple of case cuts to accomodate a 120mm Antec fan in the front and cut the case grill of the rear fan and now it breathes way much better. I made a custom sleeving for the front buttons and light of the front of the case. My side panel was built from scratch, 100% custom made. Also I installed a mobo window with a 80mm transparent fan with a fangrill to get some cold air inside of the case. My mouse pad is also custom made and it rocks!! better than most branded ones
This was a really old case from the pentium 1 era and I bought it 7 years ago really cheap cause it didnt have the side panel. Its a generic brand, the only thing from Antec is the front badge and front fan
Specs:
A64X2 3800 @4800 // Zalman CNPS9500 // Asus M2N SLI Deluxe // 2GB DDR2 SuperTalent DC 800 @1000mhz // X1900XT // 2x250Gbs Hitachi sata2 Raid0 + 80Gbs WD // TT PurePower 550W modular // VX922 // Logitech G7 // RumblePad2 Wireless
Mods:
Painted it black in a car paint shop and take out the 3 1/2 bay plates and replaced with a plastic cover. I painted the interior in mate black. Made a couple of case cuts to accomodate a 120mm Antec fan in the front and cut the case grill of the rear fan and now it breathes way much better. I made a custom sleeving for the front buttons and light of the front of the case. My side panel was built from scratch, 100% custom made. Also I installed a mobo window with a 80mm transparent fan with a fangrill to get some cold air inside of the case. My mouse pad is also custom made and it rocks!! better than most branded ones
This was a really old case from the pentium 1 era and I bought it 7 years ago really cheap cause it didnt have the side panel. Its a generic brand, the only thing from Antec is the front badge and front fan
Last edited by a moderator:
, but wheres youre vote? :S