The Ultimate Realtek HD Audio Driver Mod for Windows 10

[Manciuszz]

Hi.
I tried installing the drivers but i have Error Code: 0x00000002 .
Firstly i had error code -0001 but after adding the ManufacturerID as alanfox2000 said it changed to the one above.
Sound chip is alc892 and i am on Windows7 x64 SP1.
I have older dts/dd modded driver working perfectly so the chip is capable.
Any ideea?
Also is there somewhere a guide or short tutorial for modding the drivers?
Thanks!

make sure the "HDXMB3H.inf" file is inside Win32 or Win64 folder! otherwise it fails.

also you might need to:

add these words in your HDXMB3H.inf under [AzaliaManufacturerID.NTX86.6.0] OR [AzaliaManufacturerID.NTamd64.6.0] sections
Code:
"Realtek High Definition Audio" = IntcAzAudModel, INTELAUDIO\FUNC_01&VEN_10EC&DEV_0255

The red bolded words should be your hardware id (which you can find via the Device Manager). Big chances are its already there tho.

I had the same issue when installing via Setup.exe. I tried installing via Device Manager too, but I had an error saying system file cannot be found or something along those lines... So I installed via Device Manager after placing HDXMB3H.inf file in Win64 folder (cause I run x64 bit Windows 10) and making sure that HDXMB3H.inf contains my hardware id under (in my case) [AzaliaManufacturerID.NTX86.6.0] and it worked!

 

[cpx]

I used the id from Hardware id. In Matching device id a have a long list of id's , i will try to put those and see....
Device manager refuses to install the driver "you already have the best matching version" .
I have another question also connected to device id's, could it be possible to load vendor specific sound managers, like if i have gigabyte load the Asus one, more exactly i want to load the classic Realtek Manager for my Gigabyte board.

 

[gwx1987]

Everything is ok. Realtek High Definition Audio driver installed and working properly. Then I installed the Sound Blaster X-Fi MB 3-1.00.04 program and the "There is no supported audio device available" message appears. What should you do? Any ideas?

 

[parra_parra]

Solution to error code: "PUT THE INF FILE INTO THE FOLDER x64 OR x32" (Realtek mod driver)

 

[Sahaprof]

Everything is ok. Realtek High Definition Audio driver installed and working properly. Then I installed the Sound Blaster X-Fi MB 3-1.00.04 program and the "There is no supported audio device available" message appears. What should you do? Any ideas?View attachment 98607

 

[cpx]

Ok, so the moded driver is not working for me in windows 7 x64 sp1. With "have disk" installation a missing file error is reported and with setup error 0x0000002. Copying all the inf files from the realtek driver solves this but the driver is not loading after restart. I need to see exactly what file is needed for correct installation.

I managed to install the driver in windows 10 x64 with alc1220. Here i have another problem, the dts and dd formats are not workng, i get failed to play test tone in Default Format dialog and also applications are not sending the stream to my receiver but in the Encoded Format Dialog are working...

I have a gigabyte gaming k7 board with 2 ALC1220 chips on this windows 10 machine.
HDAUDIO\FUNC_01&VEN_10EC&DEV_1220&SUBSYS_1458A0B8&REV_1000

Thanks!

 

[gwx1987]

First, I added the .reg registry key, and then I installed the DolbyDigitalPlusHomeTheater program, CreativeSBX720, mb5_1.00.19 and DolbyHomeTheaterv4. Realtek works properly, but unfortunately DolbyDigitalPlusHomeTheater, CreativeSBX720, mb5_1.00.19 and DolbyHomeTheaterv4 sound effects do not work. Windows 10 64x version 16299.309 .

 

[alanfox2000]

Ok, so the moded driver is not working for me in windows 7 x64 sp1. With "have disk" installation a missing file error is reported and with setup error 0x0000002. Copying all the inf files from the realtek driver solves this but the driver is not loading after restart. I need to see exactly what file is needed for correct installation.

I managed to install the driver in windows 10 x64 with alc1220. Here i have another problem, the dts and dd formats are not workng, i get failed to play test tone in Default Format dialog and also applications are not sending the stream to my receiver but in the Encoded Format Dialog are working...

I have a gigabyte gaming k7 board with 2 ALC1220 chips on this windows 10 machine.
HDAUDIO\FUNC_01&VEN_10EC&DEV_1220&SUBSYS_1458A0B8&REV_1000

Thanks!

setup error 0x0000002 ->Don't use the realtek setup.exe. Install thought device manager, make sure you have copy Realtek Mod INF Files\your OS Edition\HDXMB3H.inf to Realtek Mod Driver\Your OS bit vesrion (e.g. Windows 8.1 x64, JUST COPY Realtek Mod INF Files\Windows 8.1 x64\HDXMB3H.inf to Realtek Mod Driver\WIN64)
file missing/ device manger install error -> HDXMB3H.inf Hardware ID Check (post #860) + open C:\Windows\INF\setupapi.dev.log, you can see what file missing/ what cause a error
dtsi / dolby live problem ->(for x64 OS only) RltkAPO64.7z , replace original C:\Windows\System32\RltkAPO64.dll file
"you already have the best matching version" -> HDXMB3H.inf Hardware ID Check (post #860) + remove exist realtek driver

First, I added the .reg registry key, and then I installed the DolbyDigitalPlusHomeTheater program, CreativeSBX720, mb5_1.00.19 and DolbyHomeTheaterv4. Realtek works properly, but unfortunately DolbyDigitalPlusHomeTheater, CreativeSBX720, mb5_1.00.19 and DolbyHomeTheaterv4 sound effects do not work. Windows 10 64x version 16299.309 .

If my modded driver do not work for your PC. Try using APO over Virtual Audio Cable (Link), you can still get DolbyHTv4 &DDPHT.

Yes! Its exactly what I need, just that I want to have Sound BlasterX 720 filters instead of the Razer Surround ones.

This modded driver already include Creative UpperFilters driver (mbfilt64.sys) , if you don't need Razer Surround, just uninstall their software. And make sure there no "Razer Surround Audio Controller " on device manager.

 

[cpx]

alanfox2000,

For Windows 7 x64 and alc 889a
I used the option exactly like in the picture you provided, the have disk one, manual driver pick . Windows prompted me with a file missing error after that. I copied all the files correctly under the operation system folder and added the hradware id(that solved the -0001 error).
A file is realy missing for the driver since copiing all the inf files from the original driver fixed the error, i will have to search for that exact one.

For Windows 10 x64 and alc 1220
Driver installed ok after adding device id.
Dts options are visible in the windows dialog( i replaced both RltkAPO64.dll and RltkAPO.dll) but the test tones are not working in the in the "Default Format Dialog". Also The Gigabyte Sound Manager displays no dts option of any kind.

 

[Recon-UK]

Realtek 889 i would like a driver for that please Windows 10

Also link on front page is dead, nothing to download.

http://www13.zippyshare.com/v/FePywTjs/file.html

Name: Realtek Drivers with DDL & DTS Connect.7z
Size: 83.35 MB
Uploaded: 27-05-2017 00:22

 

[cpx]

Ok, so I succeeded in installing on windows 7 as well using 0889 device id and win 8.1 inf file but now i have the same error on both windows, DTS and DD unsuported format in Advanced but they work perfect in Supported Formats( i can also hear the test sounds)
Since this happens with both chips (alc889 and alc1220) there must be an issue with the patched dll's

 

[byu1]

Realtek HDA 8351 MOD x64

Download Link: Get it Here

• Based on DJ Urko MOD
• Replace new 8351 file from Windows Update
• Replace old TEST PCEE4 dll with PCEE4 dll stable version 7.2.8000.17
• Replace Dolby Digital Plus APO GUID (according to DDPXXXAF3.dll)
• DTS unlock (patched RltkAPO.dll, RltkAPO64.dll)
• Inf include almost 8400 Hardware ID

1. Read Driver Signature Disabling Guide.
For Win8-10: Read Disabling_Driver_Signature_Enforcement_(Win8-10).docx

For Win7, install ReadyDriver Plus(don`t change install setting): SetupReadyDriverPlus.exe

2. Install Moded Realtek as normal instalation using setup.exe.

3. Install the Apps you wanted
Download at Here <----folder include individual driver and application, RltkAPO patch

Dolby, Creative Sound integrated with Windows built-in system driver (no realtek.sys file )can be download at:
http://dldolby.blogspot.com


Note:
Dolby ATMOS(DAX3) is for Windows 10 Only

Fix error code 0x0000002

Install Official Realtek Audio Driver again -> uninstall via Control Panel ->
Delete Folder C:\Program Files (x86)\Realtek AND C:\Program Files\Realtek ->
Rename the folder where the modded driver stored -> Install Modded Driver




-------------------------------------------------------------------------------------------------------------------------------------
Tested on my windows 7 x64
Problem:
DTS and Dolby do not show on speaker tab, but show on Digital Output

View attachment 96612

Device Properties Tabs missing

View attachment 96613

I installed from setup and everything and at end, after installed and restart, there is dolby digital plus, home theater under dolby tab but no settings, no dolby atmos, under advanced all list 2 channel while original DJ Urko mod has 'dolby digital, under the list .

how to fix this?

 

[Peterson]

pliss dont have Download in 1st page driveM$ help!

 

[Màthair]

Realtek HD Audio Driver 6.0.1.8403 WHQL

OEM WHQL with Dolby for:

-Fujitsu
-Gigabyte
-Lenovo
-Huawei
-Razer

LINK

OEM WHQL for:
-Acer
-MSI
-Asrock
-Clevo

LINK

OEM WHQL for:
-Asus

LINK

Win 10 x64 (NOT for x32!).

PackageVersion = PG465
DriverVer= 03/20/2018, 6.0.1.8403

 

[Peterson]

Realtek HD Audio Driver 6.0.1.8403 WHQL

OEM WHQL with Dolby for:

-Fujitsu
-Gigabyte
-Lenovo
-Huawei
-Razer

LINK

OEM WHQL for:
-Acer
-MSI
-Asrock
-Clevo

LINK

OEM WHQL for:
-Asus

LINK

Win 10 x64 (NOT for x32!).

PackageVersion = PG465
DriverVer= 03/20/2018, 6.0.1.8403

this links backup Djpionner/Urko?

 

[Màthair]

this links backup Djpionner/Urko?

Not my friend, not these are realtek oem original drivers (not MOD Drivers).

 

[alanfox2000]

testing UWP version

 

[consoled]

testing UWP version
View attachment 98758


View attachment 98757

Link? Lenovo?

 

[Jayce]

testing UWP version
View attachment 98758


View attachment 98757

Please hopefully you can make it work with all other sound cards and computers. It looks like the real deal.

 

[LuftSchutz]

Realtek HD Audio Drivers 6.0.1.8403 X86/64 with DTS-NEO & DOLBY UNLOCK 266MB

 

[cpx]

Has anyone managed to enable dts-neo on gigabyte board?
I have x370 gaming K7 and lots of drivers are able to enable dolby digital and dts interactive but dts neo is always missing.

 

[blaqsky]

Can anyone advise how to make dax2 only or (dts only) driver mod?
I tried editing hdxrt4.inf from whql driver and all messed up.

Dolby Atmos API -> Do NOT click UpdateDax3Db.exe -> APP -> tuning data is missing
Dolby Atmos API -> click UpdateDax3Db.exe -> APP -> app cannot open

registry key HKLM\SOFTWARE\Dolby\AtmosOEM found on
HUAWEI MateBook X with dax3 audio driver: http://download-c1.huawei.com/downl...oadId=95345&version=413758&siteCode=worldwide
and different hardware ID use different registry key BINARY data

Spoiler: Matebook X

[DolbyATMOSUnlock_19E53201.AddReg]
HKLM, "SOFTWARE\Dolby\Atmos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

Spoiler: Another Hardware ID

[DolbyATMOSUnlock_17AA3810.AddReg]
HKLM, "SOFTWARE\Dolby\Atmos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

I noticed this
Dolby Atmos Api > Updatedax3db > Dolby Atmos App = also delete DAX3.sdf file from C:/Program Files/Common Files/Dolby/DAX3 folder
Recopy n place DAX3.sdf file in that folder make Atmos app working again but “tuning data is missing” still appear
Still no luck for Atmos?

When i try to edit DAX3.sdf file, the following happens.
I think it will need a bruteforce for the pass. Does anyone know the password for DAX3.sdf?

 

[SoundsLucid]

Realtek High Definition Audio Driver WHQL
Mod version: 6.0.1.8393 (x86) / 6.0.1.8395 (x64)

Support OS: 32/64bit Windows 7, 8, 8.1, 10

With the mod driver, the following software are available to use

• Dolby Home Theater v4 / Advanced Audio v2 ( Only for Windows 7 & 8, Windows 10 & 8.1 users use VAC with Dolby HT/AA instead )
• Dolby Digital Plus Home Theater v4 / Advanced Audio v2
• Dobly Atmos ( Only for Windows 10 )
• Dobly Audio ( ASUS Win7& 8.1 Preset file provided by HiHawk )
  • DTS Studio Sound
  • DTS Headphone: X
• Sound BlasterX 720°

Optional: Dolby Digital Live and DTS Interactive Unlock (by HiHawk )
.............................

Disable anti-virus when install Sound BlasterX 720° & add FX Configurator to anti-virus ignore list (if it detected as virus)

If the driver installation failed, post your install log C:\Windows\INF\setupapi.dev.log to pastbin

It works beautifully - the sound difference from stock is astonishing!
I have a dolby atmos and eac\atmos 5.1 test file - all i hear is buzzing. dolby-atmos_amaze.mp4 \ 7.1Ch DTS-HD MA - Speaker Mapping Test File.mkv
a previous driver did play this. also as soon as i set the sound (spdif advanced mode to Dolby Digital live the whole thing crashes and I have to reinstall driver, so will just leave it) great setup if a little glass cannon like )

ALC 1220 | MSI X370 SLI PLUS Motherboard

THanks @alanfox2000

 

[jordon.dias]

sharing a beautiful background image for sbx 720 for all mates.looks pretty good ...see urself ........as the default background of sbx panel is not that eye candy.
replace original in
note: no need to resize.use as its provided
program files(x86)-creative-sound blaster connect2-product-sbx 720-background

.jpg

 

[alanfox2000]

My new mod win10 driver x64 only will not use Creative APO to chain SFX/MFX/EFX, only chain UI

Add a UI to disable Sound Blaster

I don't have Dolby UWP DAX3API x86 files, I cannot mod x86 realtek driver

Dolby Atmos / Dolby Atmos Sound System / Dolby Audio Apps UI are same

Also, you can change Dolby/DTS App Preset from different OEM