Post your Cinebench R23 Score

[mouacyk]

 

[T4C Fantasy]

View attachment 99860

added, nice score

 

[Space Lynx]

Any advice for me? my 5.2 ghz is stable in 8 hours plus of AIDA64 stability test, with avx -2 its stable in prime95 all 3 torture tests, games, etc. but when I turn avx to 0 and nothing else changed, everything else is still stable and prime95 doesnt crash but it says hardware failure on like one or two cores. so do i just say screw prime95 and leave it the way it is since my scores are good with avx -2 on? or should i try to adjust system agent voltage, VCCIO? and if so, what should i set their values at? i am currently on Override mode with 1.425v and LLC at mode 4 which gives me same Vcore as in BIOS as in HWINFO...

so im wondering, maybe I need an override and offset? if so what should i do? offset plus or minus? and then value for that... any help is welcome, stupid prime95... ugh.

@jboydgolfer Did you run your 5ghz at AVX 0 on prime95 yet to see if its fully stable? I bet it won't pass. Won't crash, but I bet you will get "hardware failure" as I did. currently only 4.9ghz avx 0 grants me no hardware fatal errors, regardless of voltage increases or decreases.

https://www.techpowerup.com/forums/...rdware-fatal-error-but-avx-2-its-fine.243404/ if you are interested in further discussion of it :/ its really annoying problem.

 

[Doc41]

edit: retry with 4.8GHz ;P

 

[T4C Fantasy]

View attachment 99869
edit: retry with 4.8GHz ;P

updated list, wow 3 4790Ks next to eachother

 

[jboydgolfer]

just the automatic bios settings on my OC Formula

Like one of those buttons you hit and it's OC mode or something? I know it's easy ,but often those settings entered by the manufacturer of your motherboard pump tons of voltage in to your CPU ,or at least for asrock they do. There's only really about four or five things you need to change when doing a manual overclock it's quite simple . But if you like doing it that way I'd recommend not running it for extended periods of time with that auto overclock function

 

[mouacyk]

updated list, wow 3 4790Ks next to eachother

Only to be outdone by a 4770K at 200MHz less. Can't see the original details for the 4770K, to see if memory/cache might have had something to do with this anomaly.

 

[Anarchy0110]

Can't even beat a good old 4770K. I feel so ashamed T.T
First entrance for any high performance Coffee Lake laptop CPUs (I hope so )

 

[T4C Fantasy]

View attachment 99882

Can't even beat a good old 4770K. I feel so ashamed T.T
First entrance for any high performance Coffee Lake laptop CPUs (I hope so )

congrats you have the worse scoring 6 core and 12 thread on the list xD

 

[Anarchy0110]

congrats you have the worse scoring 6 core and 12 thread on the list xD

Gotta wait for BIOS update then I saw a newer version of BIOS for the lower-end FX504GD model just minutes ago. Hope that could change things up.

 

[T4C Fantasy]

Gotta wait for BIOS update then I saw a newer version of BIOS for the lower-end FX504GD model just minutes ago. Hope that could change things up.

i like you system specs for benchmarks lol

 

[Anarchy0110]

i like you system specs for benchmarks lol

That's the downside of spearheading into the new line of products (too soon) I guess
lol
I hope I can crack 1100 cb with that i7 tbh - that's the regular score of that chip (so far).

 

[jboydgolfer]

Any advice for me? my 5.2 ghz is stable in 8 hours plus of AIDA64 stability test, with avx -2 its stable in prime95 all 3 torture tests, games, etc. but when I turn avx to 0 and nothing else changed, everything else is still stable and prime95 doesnt crash but it says hardware failure on like one or two cores. so do i just say screw prime95 and leave it the way it is since my scores are good with avx -2 on? or should i try to adjust system agent voltage, VCCIO? and if so, what should i set their values at? i am currently on Override mode with 1.425v and LLC at mode 4 which gives me same Vcore as in BIOS as in HWINFO...

so im wondering, maybe I need an override and offset? if so what should i do? offset plus or minus? and then value for that... any help is welcome, stupid prime95... ugh.

@jboydgolfer Did you run your 5ghz at AVX 0 on prime95 yet to see if its fully stable? I bet it won't pass. Won't crash, but I bet you will get "hardware failure" as I did. currently only 4.9ghz avx 0 grants me no hardware fatal errors, regardless of voltage increases or decreases.

https://www.techpowerup.com/forums/...rdware-fatal-error-but-avx-2-its-fine.243404/ if you are interested in further discussion of it :/ its really annoying problem.

The only reason I'll do an over clock is to score it in a benchmark and then I set it right back ,and although I see the benefit to stress testing a over clock, unless there's an endgame to it what's the point really To stress testing for hours on end?

If I can run a test and get a score I'm done with it. Running prime 95 with AVX ,for eight hours, or 12 hours, to me is senseless, it's like buying tires for your car ,that will allow it to go to the top of the Himalayan mountains ,even though you drive a Honda Civic in New York City. It doesn't make any sense and therefore I don't Do it. If I get 5ghz , i run a test, & im done, there's no need to run a six core CPU @ overclock for anything other than running a benchmark. And if there was a need for more power, I would've bought a more powerful chip

dont get me wrong, im not faulting anyone for doing it to their CPU, maybe they like ot do it, i personalyl take no pleasure from OC'ing, i just liek to see what my cpu can do, nothing more.


EDIT*

i tried while i had a few minutes to bring the OC up to 5100Mhz, it loads , and starts the bench, but BSOD's, im nto 100% certain what settings i need to refine to get it right, but with my voltages SO low (1.184) and my temps equally low, i know it has more, but im not a super OC guy, so im kinda hesitant to go in and chase a higher score without looking into method , and options of this new board of mine, ill try it when i have more time on my hands. My OS keeps going into recovery mode when i BSOD which took a bunch of my free tim to do this, ill get it, just need some more studying first

 

[agent_x007]

PGA 478 (Air) :

Pentium Extreme Edition 955 (AIO) :

Pentium Extreme Edition 965 (Air+) :

Xeon X3370 (AIO) :

Core i7 4960X (Air+) :

 

[T4C Fantasy]

PGA 478 (Air) :

Pentium Extreme Edition 955 (AIO) :

Pentium Extreme Edition 965 (Air+) :

Xeon X3370 (AIO) :

Core i7 4960X (Air+) :

added, your now on the leaderboard

you added more xD ill add more later have GPUs to add

all added

 

[phill]

@agent_x007 Very nice score with your 4960X on air Managed a little higher with mine but that was with water cooling!! Impressive CPU

 

[T4C Fantasy]

@agent_x007 Very nice score with your 4960X on air Managed a little higher with mine but that was with water cooling!! Impressive CPU

you didnt list yours?

 

[phill]

I've had one or two there I've not listed, I got out of competitive benching a few years ago now

 

[agent_x007]

@agent_x007 Very nice score with your 4960X on air Managed a little higher with mine but that was with water cooling!! Impressive CPU

VenomousX + 2x 120mm x 38mm Delta fans for you
Probably got lucky on silicon lotter part as well...
Highest I went so far (CPU-z valid only) :

 

[phill]

Very nice So hit and miss with these CPUs but I always find that water cooling does seem to work better with the overclocking.. How much vcore do you put through the CPU at most when your testing?

 

[agent_x007]

Highest I set was 1,50V Vcore (CPU-z valid for 4,85GHz, Cinebench 2003 4,8GHz stable, 4,73GHz R15).
However, that's for benchmarks only.
I like my CPU on low Vcore and good frequency (I'm using negative offset for 4,5GHz OC).

 

[phill]

I do like my 5960X for low vcore.. Think it's an amazing CPU, shame it's 'old hat now'

 

[Anarchy0110]

Welp, finally it works as expected ...
Somehow I still want it to reach 1000 CB.
Added the score of my home PC's i3 2130 as well.

Here's the i3 2130:

 

[T4C Fantasy]

Welp, finally it works as expected ...
Somehow I still want it to reach 1000 CB.
Added the score of my home PC's i3 2130 as well.

View attachment 99934

Here's the i3 2130:

View attachment 99935

added your scores

 

[jboydgolfer]

@lynx29 sorry bud

I'm gonna be so mad if you beat me by like 1 point lol

well then You should be happy with this then 20 points is better than 1 point, right?

@T4C Fantasy

1285 points @ 5200Mhz 8600k @jboydgolfer
i didnt have time or the knowledge to properly adjust Voltages, so i set a higher 1.38v , and took it for a run, likely could drop it, but temps arent a issue on this chip thankfully.

I had a strange "issue/problem" while trying to get OC settings right & stable...maybe someone here has run into it as well. I set a 5100Mhz OC, booted into Win10, and began running bench tests, as soon as test started, i noticed my Frequency had climbed to 5400Mhz!? I didnt want to cause damage , so i shutdown immediately, & it wasnt set to that Frequency in bios (it was 5100) , i dont know wtf happened, but seeing it approach 5500Mhz scared me, has anyone encountered a OC climbing beyond a set Frequency by THAT much?? i.e 200-400 Mhz? Only encountered it the one time, never again, was using realtemp to monitor temp & Frequency. Likely a false reading maybe, i dunno. Scared me though