The Ultimate Realtek HD Audio Driver Mod for Windows 10

[Diogo Silva]

Update your installed apo driver (mod from realtek generic driver) to Realtek HDA Driver provided by your manufacturer according to your motherboard

View attachment 100226

Hello @alanfox2000,
The manufacturer of my motherboard is Asus, the model is P5L-1394, and the last update for the Realtek chip Audio was released at 2007/01/29, the Version is V6.0.1.5350 and it´s for Windows Vista (WHQL).
I think that this will not work.
Sorry for my bad English.

 

[Michal77]

Realtek High Definition Audio Driver WHQL
Mod version: 6.0.1.8393 (x86) / 6.0.1.8395 (x64)

Support OS: 32/64bit Windows 7, 8, 8.1, 10

With the mod driver, the following software are available to use

• Dolby Home Theater v4 / Advanced Audio v2 ( Only for Windows 7 & 8, Windows 10 & 8.1 users use VAC with Dolby HT/AA instead )
• Dolby Digital Plus Home Theater v4 / Advanced Audio v2
• Dobly Atmos ( Only for Windows 10 )
• Dobly Audio ( ASUS Win7& 8.1 Preset file provided by HiHawk )
  • DTS Studio Sound
  • DTS Headphone: X
• Sound BlasterX 720°

Optional: Dolby Digital Live and DTS Interactive Unlock (by HiHawk )

Installation Guide:

1. Disable Driver Signature Verification (Run cmd as admin, type "bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS" enter & type "bcdedit -set TESTSIGNING ON" enter (without the ""), reboot.
2. Copy RltkAPO64.DLL or RltkAPO.DLL if you want to unlock Dolby Digital Live and DTS Interactive
3. Copy HDXMB3H.inf inf files to Realtek Mod Driver\WIN32 or WIN64
4. Install thought Devices Mangers or Realtek Setup.exe
5. Install Software for Realtek Mod Driver

Virtual Audio Cable with APO

There are two different Virtual Audio Cable:

Virtual Audio Cable by Eugene V. Muzychenko - Retail Version: 4.50.0.9141

VB-CABLE Virtual Audio Device (Free + Cable A + Cable B) - Version: Pack43

Included FX Configurator 1.0.0.1

Software for Virtual Audio Cable

• Equalizer APO
• FxSound Enhancer
• Peace Equalizer
• Spatial Sound Card
• ViPER4Windows (Include Preset by anarki999 , run ViPER4Windows_Presets.exe to install -> Load Preset: Very High quality.vpf from V4W Software and select FreeStyle)
• Bongiovi DPS
• Dolby Home Theater v4 / Advanced Audio v2 ( For Windows 10 & 8.1 )

Installation Guide: http://puresoftapps.blogspot.com/2018/03/virtual-audio-cable-apo-user-guide.html



Realtek High Definition Audio Driver + Virtual Audio Cable with APO
http://www.mediafire.com/file/kdak4a48e83xq93/[2018-03-18]realtek_hda_vac.7z


If DTS Audio don't work, open FX Configurator select speakers click Apply, then select DTSAPO3_WIN7.ini or DTSAPO3_WIN10.ini and click Add external data, Restart DTS APO Service from Windows Services Manager

Disable anti-virus when install Sound BlasterX 720° & add FX Configurator to anti-virus ignore list (if it detected as virus)

If the driver installation failed, post your install log C:\Windows\INF\setupapi.dev.log to pastbin

Hello!

I'm still struggling with Install Realtek Mod Driver [Error Code : -0001]
I tried literally everything. (about 4 hours.)
Device menager also shows the error.
Windows 7 32bit, sound device is Realtek ALC268.

So here is logs:
Via installer:

https://pastebin.com/49BuYAQd

Via Device Menager:

https://pastebin.com/6muS5yEt

I'm not sure what it means: "Policy is set to make all digital signatures equal." But YES I Disabled Driver Signature Verification in cmd.

Please, help me

 

[Jayce]

Is there a difference of sound between desktop Atmos and uwp Atmos?

it worked man, thank for your help, taking ownership the reg file and config worked.

The Reason why it didn't work before for me was because i didn't load a windows 10 config.

 

[not_retr0]

Can't find the required files in the download link. Link redirects to OneDrive directory which does not contain the required files. Please fix!

 

[jamam]

@alanfox2000 my pc is Dell optiplex 5040 with waves maxxaudio pro id is HDAUDIO\FUNC_01&VEN_10EC&DEV_0255&SUBSYS_102806BA ,, is it possible can i use your modded driver if yes than how ?

 

[Diogo Silva]

Can't find the required files in the download link. Link redirects to OneDrive directory which does not contain the required files. Please fix!

It's @alanfox2000 's Complete Folder, ALL Mods, Tools, etc...
Just choose one mod for your PC.

 

[amaan07]

That's how it been doing it and using fx configurator and import the reg file and load the file and apply and restart audio services and then Dolby Atmos uwp app sound effect doesn't work.

Same thing is happening with me, drivers installed correctly but Dolby Atmos UWP sound effect doesn'twork, Dolby Atmos tab is also not appearing in sound..

 

[Jayce]

Same thing is happening with me, drivers installed correctly but Dolby Atmos UWP sound effect doesn'twork, Dolby Atmos tab is also not appearing in sound..

It works for me now. Because if you read post #1,212

 

[amaan07]

It works for me now. Because if you read post #1,212

I loaded Windows 10 config correctly, imported registry and restarted audio service but there is no dolby atmos effect, turning off and on doesnt help..

Just update from apo driver to the official Realtek WHQL driver, then use fx configurator

installed everything perfectly as instructed but after loading the Windows 10 config and registry in FX config the bass effect and dolby atmos effect cease to work. Please help

 

[Jayce]

I loaded Windows 10 config correctly, imported registry and restarted audio service but there is no dolby atmos effect, turning off and on doesnt help..


installed everything perfectly as instructed but after loading the Windows 10 config and registry in FX config the bass effect and dolby atmos effect cease to work. Please help

Did you load windows 10 config first and reg file second then apply and restart. Make sure when you install the official driver, install the first one it says in device manager?

 

[arun97]

Can someone post a step by step installation for this drive, I am new here and its very confusing. Thanks in advance.

 

[amaan07]

Did you load windows 10 config first and reg file second then apply and restart. Make sure when you install the official driver, install the first one it says in device manager?

I did this- 1-installed realtek APO driver through device manager, selected HDXMB3H.inf
2. updated realtek official driver from device manager, not used have disk option
3. Loaded windows 10 config first and reg file second then applied and restarted.
4. installed Dolby Atmos UWP app through power shell and it opened successfully
But not getting bass effect and dolby atmos effect. Am i doing anything wrong?

 

[alanfox2000]

@alanfox2000 my pc is Dell optiplex 5040 with waves maxxaudio pro id is HDAUDIO\FUNC_01&VEN_10EC&DEV_0255&SUBSYS_102806BA ,, is it possible can i use your modded driver if yes than how ?

It works on any realtek chips. But maxxaudio pro sound effect will not work. Since you are using my apo driver and sound enhancer provided by me

 

[Jayce]

@alanfox2000 do have the Dolby tab on playback devices?

 

[popm]

need fxconfigurator 2 ( mediafire is blocked ) and I have sound effet with out dolby app ! think fxconf 1 is not compatible with new driver !

 

[amaan07]

@alanfox2000 do have the Dolby tab on playback devices?

no..i think this may be the reason the sound effect is not changing after installing the drivers correctly....

 

[Jayce]

no..i think this may be the reason the sound effect is not changing after installing the drivers correctly....

The sound effect works for me, your sound card might not support it.

 

[alanfox2000]

@alanfox2000 do have the Dolby tab on playback devices?

The Dolby Tab is not for UWP version, only for desktop.

no..i think this may be the reason the sound effect is not changing after installing the drivers correctly....

Have you select the speaker endpoint and take ownership of properties & fxproperties registry key?

 

[popm]

The Dolby Tab is not for UWP version, only for desktop.

Have you select the speaker endpoint and take ownership of properties & fxproperties registry key?

any help for me !

 

[amaan07]

The Dolby Tab is not for UWP version, only for desktop.

Have you select the speaker endpoint and take ownership of properties & fxproperties registry key?

I have taken ownership, how to select speaker endpoint?

The sound effect works for me, your sound card might not support it.

The sound effect is working with earlier mod having dolby audio tab..

 

[popm]

I have taken ownership, how to select speaker endpoint?


The sound effect is working with earlier mod having dolby audio tab..

so am invisible here !! some one upload fxconfig 2 for me ( not in mediafire plz ) 3 post no one respond !!! it becomes spam

 

[alanfox2000]

I have taken ownership, how to select speaker endpoint?


The sound effect is working with earlier mod having dolby audio tab..

so am invisible here !! some one upload fxconfig 2 for me ( not in mediafire plz ) 3 post no one respond !!! it becomes spam

reuploaded to mf and can be downloaded, unzip pw 123

 

[amaan07]

View attachment 100306


reuploaded to mf and can be downloaded, unzip pw 123

Yes alan i selected the endpoint and after refresh the values doesn't disaappear..what could be wrong?

 

[popm]

View attachment 100306


reuploaded to mf and can be downloaded, unzip pw 123

thx finally now time to understand VAC method ( can just load and app just speaker out put or is obligated to passed by this method line 1 and how it working if is just virtual ) it becomes difficult to apply the tutorial this days

some explain what driver talking about in this step 4 and where is setup.bat am confused !!
4-Download the correspond driver, unzip and run setup.bat (with uninstall function) as Admin!

.
return again now is ok I understand how to use vac but why no effect !!!

 

[alanfox2000]

Yes alan i selected the endpoint and after refresh the values doesn't disaappear..what could be wrong?

take ownership of properties & fxproperties registry key by RegOwnershipEx & load ini config apply again
https://winaero.com/comment.php?comment.news.210