The file CreativeAudioEffectsComponentInstaller_2.0.0.17.exe don't necessary, only for OEM PC bundled with Cinema 5.
And what the different if you don't install SpeakerEQHaier_1.0.0.3.exe?
I can send you a few video Tutorial on YouTube, if you want. You should be able to understand how it works once you're done watching them.
Edit:
Fundamentals:
First, choose and install an APO Driver of your liking that you wish to work with by modifying the installation.
Then run FX Configurator, choose the endpoint which you have your speakers connected to which is usually indicated by (Active) ENDPOINT_NAME (Realtek High Definition Audio) {Random Registry Entry}
Use the save function under Config to save default of your Realtek Endpoint Configuration, I recommend backing up the registry of that Endpoint too. Then load your desired APO's Config, and import registry if necessary.
Restart the Audio service and the corresponding APO driver service if necessary, and you should be good.
Can I explain dolby's features like the following:
Dialog Enhancer: View attachment 103164
The maximum is 20. The default is 12. if added, it will be clearer
Intelligent EQ: View attachment 103165
The default is 10. Maximum is 20? If you add value, bass and treb will be stronger
Regulator: View attachment 103166
This is a self-tuning system. This feature needs to be enabled to make Dolby work better
Surround: View attachment 103167
Surround decoder: Allows you to decode stereo sound into multi-dimensional sound
Surround boost: maximum of 100, If you add values, the surround sound will be more than
Volume for virtual speakers: View attachment 103169
How much is the maximum? The default is 10. Increase the volume for virtual speakers.
Volume max, leveler, output surround View attachment 103171
Volume max: Makes the volume bigger
Volume leveler: Makes the volume more balanced
Height speakers: If you use Dolby Atmos, you need to convert the height of the virtualizer from 0 to 1. This is to turn on Dolby Atmos. If you disable it you can only use up to 7.1
In addition to that, you need to turn off speaker dist. This is a feature for laptop speakers View attachment 103172
---------------------------------------------------------------------------------------------------------------------------------------------------- Sound Blaster Cinema 5 - Temporary tips of reduce high cpu usage by SBC5 ---------------------------------------------------------------------------------------- Temporary hack to minimize high CPU utilization by 'Creative.UWPRPCService.exe' -------------------------------------------------------------------------------------------------
I think reason behind 'UWPRPCService ' high usage of CPU is because of it's high quality audio output with amazing crystal clear surrounding sound
Don't need to abandon SBC5, neither u need to use additional audio enhancer on top it, SBC5 is more than enough
No need to worry about this issue, just follow this simple steps, & enjoy using SBC5
UWP Service utilizes 25% of CPU, use sbc5 when required, see instructions below
Search for 'Services' from search box on Desktop, Open services, Right click on 'UWP RPC Service'
Select 'Properties', set Startup type to - Manual, apply & ok
When you want to use SBC5, Open Task Manager, go to services, right click on 'UWPService', click on 'Start'
To stop, right click on UWPService, click on 'Stop'
I can send you a few video Tutorial on YouTube, if you want. You should be able to understand how it works once you're done watching them.
Edit:
Fundamentals:
First, choose and install an APO Driver of your liking that you wish to work with by modifying the installation.
Then run FX Configurator, choose the endpoint which you have your speakers connected to which is usually indicated by (Active) ENDPOINT_NAME (Realtek High Definition Audio) {Random Registry Entry}
Use the save function under Config to save default of your Realtek Endpoint Configuration, I recommend backing up the registry of that Endpoint too. Then load your desired APO's Config, and import registry if necessary.
Restart the Audio service and the corresponding APO driver service if necessary, and you should be good.
The file CreativeAudioEffectsComponentInstaller_2.0.0.17.exe don't necessary, only for OEM PC bundled with Cinema 5.
And what the different if you don't install SpeakerEQHaier_1.0.0.3.exe?
Just load the config Sound Blaster Connect UWP app Render.ini if using Cinema 5.
For Sound Blaster X7, may be you can modify ksusbaud.inf and add your HWID to force install Sound Blaster X7 driver.
---------------------------------------------------------------------------------------------------------------------------------------------------- Sound Blaster Cinema 5 - Temporary tips of reduce high cpu usage by SBC5 ---------------------------------------------------------------------------------------- Temporary hack to minimize high CPU utilization by 'Creative.UWPRPCService.exe' -------------------------------------------------------------------------------------------------
I think reason behind 'UWPRPCService ' high usage of CPU is because of it's high quality audio output with amazing crystal clear surrounding sound
Don't need to abandon SBC5, neither u need to use additional audio enhancer on top it, SBC5 is more than enough
No need to worry about this issue, just follow this simple steps, & enjoy using SBC5
UWP Service utilizes 25% of CPU, use sbc5 when required, see instructions below
Search for 'Services' from search box on Desktop, Open services, Right click on 'UWP RPC Service'
Select 'Properties', set Startup type to - Manual, apply & ok
When you want to use SBC5, Open Task Manager, go to services, right click on 'UWPService', click on 'Start'
To stop, right click on UWPService, click on 'Stop'
I'am editing xml file of Dolby Atmos Gaming for Higher Volume & Clearer Sound output
I will share it tomorrow, it really increases audio performance Dolby Atmos Gaming
Yep, i`ll put my eyes wide open. Never doubt abou that; if have more videos, will be nice, i need an intense avanced learning about this program @Romulus2K4 !.
---------------------------------------------------------------------------------------------------------------------------------------------------- Sound Blaster Cinema 5 - Temporary tips of reduce high cpu usage by SBC5 ---------------------------------------------------------------------------------------- Temporary hack to minimize high CPU utilization by 'Creative.UWPRPCService.exe' -------------------------------------------------------------------------------------------------
I think reason behind 'UWPRPCService ' high usage of CPU is because of it's high quality audio output with amazing crystal clear surrounding sound
Don't need to abandon SBC5, neither u need to use additional audio enhancer on top it, SBC5 is more than enough
No need to worry about this issue, just follow this simple steps, & enjoy using SBC5
UWP Service utilizes 25% of CPU, use sbc5 when required, see instructions below
Search for 'Services' from search box on Desktop, Open services, Right click on 'UWP RPC Service'
Select 'Properties', set Startup type to - Manual, apply & ok
When you want to use SBC5, Open Task Manager, go to services, right click on 'UWPService', click on 'Start'
To stop, right click on UWPService, click on 'Stop'
I'am editing xml file of Dolby Atmos Gaming for Higher Volume & Clearer Sound output
I will share it tomorrow, it really increases audio performance Dolby Atmos Gaming
Just the service itself 2.0.0.17 solve Creative.UWPRPCService.exe by copying this into your install and using your installer, it works fine without the new MBAPO2.dll.
Just the service itself 2.0.0.17 solve Creative.UWPRPCService.exe by copying this into your install and using your installer, it works fine without the new MBAPO2.dll.
Creative.UWPRPCService.exe, MBAPO2 dll, mbfilt64.sys is a set of driver
A set of driver Creative.UWPRPCService.exe , MBAPO2 dll , mbfilt64.sys install to System32 and syswow64 folder
It should be work correctly with the set of driver, with the new GenKGA you maked
you need to force install INF file containing MBfilt64.sys driver from Realtek drivers, then install XFi MB3 software, and then if not work out of the box you need to use GenKGA to generate kga files. GenKGA source code
Is it cased by MBfilt64.sys or/and MBAPO2 dll files that make the UWP app not activated
Or you need to compiled GenKGA with MBfilt64.sys installed?
UWP Driver (2.0.0.14, 2.0.0.16, 2.0.0.17, 2.0.0.19) with original inf file https://www30.zippyshare.com/v/qQwGSYaC/file.html
I create Install.cmd to install mbapo2 dll files and Creative.UWPRPCService.exe, mbfilt64.sys will not install though bat
if you want to install original driver with mbfilt64.sys, edit CreativeExtension.inf and add your HWID
Use DriverStoreExplorer to install CreativeExtension.inf (Install/Uninstall method similar to install realtek UAD)
Dolby uwp+ SBX720 Desktop ini file and Dolby uwp+SBX720 desktop alternative ini file. The Audio delays or cuts out for me if video with audio is paused and then played. Can someone please help me fix this issue?
Creative.UWPRPCService.exe, MBAPO2 dll, mbfilt64.sys is a set of driver
A set of driver Creative.UWPRPCService.exe , MBAPO2 dll , mbfilt64.sys install to System32 and syswow64 folder
It should be work correctly with the set of driver, with the new GenKGA you maked
Is it cased by MBfilt64.sys or/and MBAPO2 dll files that make the UWP app not activated
Or you need to compiled GenKGA with MBfilt64.sys installed?
UWP Driver (2.0.0.14, 2.0.0.16, 2.0.0.17, 2.0.0.19) with original inf file https://www30.zippyshare.com/v/qQwGSYaC/file.html
I create Install.cmd to install mbapo2 dll files and Creative.UWPRPCService.exe, mbfilt64.sys will not install though bat
if you want to install original driver with mbfilt64.sys, edit CreativeExtension.inf and add your HWID
Use DriverStoreExplorer to install CreativeExtension.inf (Install/Uninstall method similar to install realtek UAD)
That's the exact reason I never use multiple audio enhancers simultaneously, it obviously creates distorted audio, because of difference in audio configuration settings, single is best
I installed UWP Driver v2.0.0.19 & I it does not activates Sound Blaster Cinema 5, this is surely a bug of v2.0.0.19
That's the exact reason I never use multiple audio enhancers simultaneously, it obviously creates distorted audio, because of difference in audio configuration settings, single is best
On Windows 10, Audio pass though audio engine's audio processing objects:
APO pipelines: Stream effects (SFX) -> Mode effects (MFX)-> and Endpoint effects (EFX).
Just have a little look on the right side of the pic
Use AudioDeviceGraphDump, which show the current APO pipeline on your PC
If I want
Dolby UWP SFX -> Sound Blaster Connect Desktop SFX
Place the "Dolby UWP SFX" GUID before "Sound Blaster Connect Desktop SFX" GUID
[CompositeSFX]
{D9916FA0-99F7-11E7-BF21-6C0B849889E1}
{F841F354-41AB-4652-81EF-F879AE87F9FC}
Too many APO on piplelines cause delay
May be APO Pipelines for SBC desktop app and Dolby UWP app should be
Dolby SFX -> Dolby EFX -> SBC EFX
SBC SFX -> Dolby SFX -> Dolby EFX
yep, it cause distorted audio because of using two enhancers
just listen distorted audio through speakers testing if the distorted audio is good or bad
However, the old realtek mod (The Ultimate Realtek HD Audio Driver Mod for Windows 10)
use the MBWrp64.dll to have multiple audio enhancer (not using CompositeSFX, CompositeMFX, CompositeEFX reg key)
However if you add
HKR,"FX\\0",%PKEY_SFX_APO3%,,%GUID_DOLBYUWP_SFX% HKR,"FX\\0",%PKEY_EFX_APO3%,,%GUID_DOLBYUWP_EFX%
Would cause no audio
But only MFX work
HKR,"FX\\0",%PKEY_MFX_APO3%,,%GUID_DOLBYUWP_SFX% HKR,"FX\\0",%PKEY_MFX_APO4%,,%GUID_DOLBYUWP_EFX%
On Windows 10, Audio pass though audio engine's audio processing objects:
APO pipelines: Stream effects (SFX) -> Mode effects (MFX)-> and Endpoint effects (EFX).
Just have a little look on the right side of the pic
Use AudioDeviceGraphDump, which show the current APO pipeline on your PC
If I want
Dolby UWP SFX -> Sound Blaster Connect Desktop SFX
Place the "Dolby UWP SFX" GUID before "Sound Blaster Connect Desktop SFX" GUID
[CompositeSFX]
{D9916FA0-99F7-11E7-BF21-6C0B849889E1}
{F841F354-41AB-4652-81EF-F879AE87F9FC}
Too many APO on piplelines cause delay
May be APO Pipelines for SBC desktop app and Dolby UWP app should be
Dolby SFX -> Dolby EFX -> SBC EFX
SBC SFX -> Dolby SFX -> Dolby EFX
yep, it cause distorted audio because of using two enhancers
just listen distorted audio through speakers testing if the distorted audio is good or bad
However, the old realtek mod (The Ultimate Realtek HD Audio Driver Mod for Windows 10)
use the MBWrp64.dll to have multiple audio enhancer (not using CompositeSFX, CompositeMFX, CompositeEFX reg key)
However if you add
HKR,"FX\\0",%PKEY_SFX_APO3%,,%GUID_DOLBYUWP_SFX% HKR,"FX\\0",%PKEY_EFX_APO3%,,%GUID_DOLBYUWP_EFX%
Would cause no audio
But only MFX work
HKR,"FX\\0",%PKEY_MFX_APO3%,,%GUID_DOLBYUWP_SFX% HKR,"FX\\0",%PKEY_MFX_APO4%,,%GUID_DOLBYUWP_EFX%
