Movie sound normalization

[Bruci]

There are 3 files, in which order should I install this files ?

Hello,
1. Download APO driver from alanfox's page.
2. Download the driver (dotNetApp and VisualCppAppx) from the folder Runtime
3. I installed the driver ( dotNetAppx_x86_x64_v1.zip + VisualCppAppx_x86_x64_v1.zip)
4. I installed the APO driver 2.2.5
5. I selected the driver component Dolby DS1 7.6.5.1 ( for Dolby Digital Plus)
6. I opened the Fxconfigurator, selected the endpoints [active] loudspeakers
7. I clicked on Product Config Tool and select Dolby Digital Plus Home Theater
8. But in the Product Config Tool is no possibility to store the settings
9. I installed DDPlusHT.msi
10. I started Dolby Digital PLUS Home Setting
11. I see nothing in the equalizer ( I can turn the button ON and OFF, but there are no sound changes).

What can I do?

 

[CityCultivator]

Hello,
1. Download APO driver from alanfox's page.
2. Download the driver (dotNetApp and VisualCppAppx) from the folder Runtime
3. I installed the driver ( dotNetAppx_x86_x64_v1.zip + VisualCppAppx_x86_x64_v1.zip)
4. I installed the APO driver 2.2.5
5. I selected the driver component Dolby DS1 7.6.5.1 ( for Dolby Digital Plus)
6. I opened the Fxconfigurator, selected the endpoints [active] loudspeakers
7. I clicked on Product Config Tool and select Dolby Digital Plus Home Theater
8. But in the Product Config Tool is no possibility to store the settings
9. I installed DDPlusHT.msi
10. I started Dolby Digital PLUS Home Setting
11. I see nothing in the equalizer ( I can turn the button ON and OFF, but there are no sound changes).

What can I do?

Did you click the apply button / does the button appear as in the above picture?

 

[Bruci]

Yes, I click the button, it's the same picture.

 

[CityCultivator]

Yes, I click the button, it's the same picture.

Click on the endpoints list and print screeen so that I can see all your available endpoints on your system.

 

[Bruci]

 

[CityCultivator]

View attachment 108042View attachment 108043

If I'm guessing properly
lautsprecher - 8fcbb28c -is your onboard speaker out?
You are using onboard out or any other out (HDMI/realtek 2.0 usb/SPDIF)?

 

[Bruci]

Hello.
I'm using only the lautsprecher:

 

[CityCultivator]

View attachment 108042View attachment 108043

If Fx configurator has lautsprecher selected in these pictures, it seem that Dolby Digital Plus are not loaded, as Dolby Digital Plus are loaded like this:

You will notice that:
1. In the Effects Configuration window, only the LFX APO and Property page has contents.
2.In the Processing Mode Configuration window, only LFX APO Processing Modes have contents.
Any endpoint with Dolby Digital Plus must have these same contents. Thus it seem that Dolby Digital Plus is not loaded.
Actions:
Select your endpoint and use the product config tool again. It must be the same as above, with same numbers.

 

[Bruci]

Hello,
1. I selected my endpoint
2. I used product config tool
All fiels hace the same number.
Then I start the tool Dolby Digital Plus Home Theater.
But I can not change any sound settings. I turned the button On/Off, changed movie/music etc.

 

[CityCultivator]

Hello,
1. I selected my endpoint
2. I used product config tool
All fiels hace the same number.
Then I start the tool Dolby Digital Plus Home Theater.
But I can not change any sound settings. I turned the button On/Off, changed movie/music etc.

View attachment 108113

At this point I have no further idea. I can only recommend you to try some other enhancers, such as DTS Digital Entertainment. It also has voice enhancement, audio normalization and audio boosting.
Just select the option for DTS in maintenance driver and do product config tool again with DTS Digital Entertainment. You can config the enhancer in sound control panel, with an additional option of DTS.

In this example, there is a dolby tab, but if DTS is selected, a DTS tab should be present.
In my example, Dolby Home Theater v3 is used, but does not have voice enhancement or normalization.
Note: If DTS cannot be installed properly, check that Visual c++ 2008 x64 run-time is installed.

 

[Bruci]

Hello,
I tried to install the DTS Digital Entertainment as above explained. But I've got no DTS/Dolby-Tab in the Microsoft High Definition Audio Device.
What can I do?