- Joined
- Oct 9, 2007
- Messages
- 46,968 (7.60/day)
- Location
- Hyderabad, India
System Name | RBMK-1000 |
---|---|
Processor | AMD Ryzen 7 5700G |
Motherboard | ASUS ROG Strix B450-E Gaming |
Cooling | DeepCool Gammax L240 V2 |
Memory | 2x 8GB G.Skill Sniper X |
Video Card(s) | Palit GeForce RTX 2080 SUPER GameRock |
Storage | Western Digital Black NVMe 512GB |
Display(s) | BenQ 1440p 60 Hz 27-inch |
Case | Corsair Carbide 100R |
Audio Device(s) | ASUS SupremeFX S1220A |
Power Supply | Cooler Master MWE Gold 650W |
Mouse | ASUS ROG Strix Impact |
Keyboard | Gamdias Hermes E2 |
Software | Windows 11 Pro |
The new Kolink Inspire K1 RGB Midi-Tower is a stylish ATX case featuring a tempered glass front panel, complete with pre-installed 120mm RGB fans and an additional 80mm rear-mounted fan. The tidy interior of the Inspire K1 offers lots of space for installation, with easy access via removal of the tool-less acrylic side panel.The case also includes adequate space for watercooling configurations, supporting up to a 240mm radiator and offering convenient cable management. It offers a really great solution for builders looking for an affordable case that not only looks great, but offers fantastic value for money.
The Kolink Inspire K1 at a glance:
The Kolink Inspire K1 chassis is built with SECC steel, complete with a tool-less acrylic side panel. The brushed front I/O panel includes 1 x USB 3.0, 2 x USB 2.0 ports and HD Audio as standard.
Inside it has room to support motherboards inclduding ATX, Mini-ATX and Mini-ITX models. It's top-mount power supply is installed in the upper rear of section of the case, powering graphics cards up to a maximum of 35cm in length.
In the front of the case, storage options consist of up to 2 x 3.5" HDDs, with a further 3.5" HDD slot that can be attached to the rear of the motherboard tray; alternatively users can install up to 2 x 2.5" SDDs there instead.
When it comes to cooling the Kolink Inspire K1 comes pre-installed with 2 x 120 mm fans featuring Rainbow RGB-LED lighting, with an additional 80 mm fan located at the back. Both front-facing fans are connected to the bundled RGB controller, including a remote control that enables users to select from up to 350 different effects and supports up to an additional 2 RGB strips.
Lastly, for those wishing to configure their build with additional water-cooling solutions, the Kolink Inspire K1 can support up to a 240mm radiator with a 15mm CPU cooler clearance.
Technical Details:
View at TechPowerUp Main Site
![](https://www.techpowerup.com/img/iDky28LmOH4PTomY_thm.jpg)
![](https://www.techpowerup.com/img/y8MzZR0ezErour44_thm.jpg)
![](https://www.techpowerup.com/img/llw8mkbfoToXi6lL_thm.jpg)
![](https://www.techpowerup.com/img/MASrtUSN6G1SOqJu_thm.jpg)
The Kolink Inspire K1 at a glance:
- Designer case compatible with motherboards up to ATX
- Acrylic glass side panel and tempered glass front
- 2x Pre-installed 120 mm RGB-LED fans, 1x 80 mm fan on the back
- I/O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out
- Supports one 240 mm format radiator
- 3x 3.5 and 2x 2.5" drive slots
- Fits graphics cards up to 35 cm in lenth & CPU coolers up to 15 cm high
- Includes fan controller and remote controller
The Kolink Inspire K1 chassis is built with SECC steel, complete with a tool-less acrylic side panel. The brushed front I/O panel includes 1 x USB 3.0, 2 x USB 2.0 ports and HD Audio as standard.
Inside it has room to support motherboards inclduding ATX, Mini-ATX and Mini-ITX models. It's top-mount power supply is installed in the upper rear of section of the case, powering graphics cards up to a maximum of 35cm in length.
In the front of the case, storage options consist of up to 2 x 3.5" HDDs, with a further 3.5" HDD slot that can be attached to the rear of the motherboard tray; alternatively users can install up to 2 x 2.5" SDDs there instead.
When it comes to cooling the Kolink Inspire K1 comes pre-installed with 2 x 120 mm fans featuring Rainbow RGB-LED lighting, with an additional 80 mm fan located at the back. Both front-facing fans are connected to the bundled RGB controller, including a remote control that enables users to select from up to 350 different effects and supports up to an additional 2 RGB strips.
Lastly, for those wishing to configure their build with additional water-cooling solutions, the Kolink Inspire K1 can support up to a 240mm radiator with a 15mm CPU cooler clearance.
Technical Details:
- Dimensions: 175 x 350 x 410 mm (W x H x D)
- Material: Steel, acrylic glass, tempered glass
- Weight: approx. 3.5 kg
- Colour: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total Possible Fans:
- 2x 120 mm (Front)
- 1x 80 mm (Rear)
- Pre-installed:
- 2x 120 mm RGB-LED fans (Front)
- 1x 80 mm (rear)
- Radiator Mountings:
- 1x 240 mm (Front)
- Drive Bays:
- 3x 3.5" (internal)
- 2x 2.5" (internal)
- PSU: 1x Standard ATX up to 160 mm (optional)
- Expansion Slots: 7
- I/O Panel:
- 2x USB 2.0 (internal connection)
- 1x USB 3.0 (internal connection)
- 1x Audio In/Out
- Max GPU length: 350 mm
- Max CPU cooler height: 150 mm
View at TechPowerUp Main Site