Xeon Owners Club

mouacyk · Dec 23, 2018

dalekdukesboy said:
My best results thus far working with RIVE black and a corsair cooler 280 mm with modded fans and xeon E5-1680V2.

YOu finally achieved 70GB/s! Congratulations.

dalekdukesboy · Dec 23, 2018

mouacyk said:
YOu finally achieved 70GB/s! Congratulations.

Stably yes, lol. I've achieved it before but with questionable stability and this is furthest I've pushed this CPU as well so thanks definitely my best overall overclock with this thing.

lexluthermiester said:
Very respectable OC. Personally would go with 4.2ghz and a lower voltage for a 24/7 OC, but still.

Thanks! Yeah this is me pushing to see what the limits are. For a long time I had it at 4.4-4.5 ghz but seems the RIVE black edition does indeed have longer legs than the regular RIVE which I used before to get best OC. Also using less voltage which is why I was able to push further though part of that was due to a bad power supply but definitely this motherboard is the beast of all beasts for X79. I was doing this also to see just how far the Bus could be pushed and got further than I had in past also. Aiming for a 4.7 ghz stable run not sure I will get there due to temps but may change to higher multiplier and see if that helps.

HUSKIE · Dec 25, 2018

forgot to show the xeon with custom water loop. after out from hospital two days ago.

dalekdukesboy · Dec 25, 2018

HUSKIE said:
forgot to show the xeon with custom water loop. after out from hospital two days ago.

View attachment 113334

Looks lovely! I'm jealous my setup is such a mess right now it's like an open air case but messier lol. Anyway more importantly hope you're well and able to enjoy Christmas in good health hospital no place to be ever but not on holidays in particular! Also what is your OC and temps like with that setup? Wonder how much better it is than my AIO.

Edwired · Dec 25, 2018

Sure i was in hospital over 2 weeks ago for my second cataract surgery it getting better by the day was suffering from imbalance vision after the first surgery was getting motion sickness it was awful for 3 months.

Atreides · Dec 25, 2018

Just picked up a W3530 that came with a P6T Deluxe that the seller said wouldn't work in that board and it was only a socket protector.. :rolleyes:

Needless to say it works just fine. Just started messing with last night and so far 4.1ish on air booting Server 08 R2. Once I put it under SS I imagine I'll run out of BCLK before I hit the chips limit. I'll post my final overclock here.

Edwired · Dec 25, 2018

Here the pcb board for hardware voltage monitoring i know it abit ugly not competed yet as i still have to add a vcore wire to check what it supplying through the cpu. It enables me to dial in voltages correctly as the bios is overvotage alot in the settings like the vdimm in bios is 2.02v where the back of the vdimm slot is showing 2.14v idle and 2.16v loaded it varies depends on prime 95 in blend mode i think

Atreides · Dec 26, 2018

I could read through the tread but I just got up so I'll just ask. What board are you modding?

lexluthermiester · Dec 26, 2018

Atreides said:
I could read through the tread but I just got up so I'll just ask. What board are you modding?

I'd like to know this too.

dorsetknob · Dec 26, 2018

Asus 775 modded I believe

lexluthermiester · Dec 26, 2018

dorsetknob said:
Asus 775 modded I believe

That would explain the high voltage for the VDimm..

dorsetknob · Dec 26, 2018

Not sure of the model of board as far as I recollect its a p5 e dulux with the 771 mods

Edwired · Dec 27, 2018

The board im using is asus p5q premium modded to run with xeon e5450 with pcb board attached to it is for voltage montioring as the asus board is known for overvoltaging that why i need to make sure at certain vdimm voltage is not too high for example if i selected 2.10v in the bios it will show top vdimm coils at 2.30v and vdimm slot will be around 2.23v to 2.26v depends on the load.
Nothing worse than senting the ram to an early death

Atreides · Dec 27, 2018

My apologies well..but why not just crank it down in BIOS? I have that board and have yet too kill RAM and trust I'm good at killing parts. You should see my Athlon XP burnt underside collection.

Edwired · Dec 27, 2018

Ouch poor cpu burnt to a crisp ha. I know what you mean it just i wanted to know what the board is doing with each voltage nothing worse if you blew a golden sample cpu lol.

Just had another read at this link about voltage points http://www.hardwarecanucks.com/foru...3-asus-p5q-pro-p45-motherboard-review-14.html.

And i just made a rookie mistake that the ground point is the screw hole where i had the dmm black probe in the molex plug which resulted a higher voltage reading god i feel like an tool. Funny thing was it was higher than 0.48v in reading. This gonna be punishing for me to fine tune the voltages again "facepalmed"

Atreides · Dec 27, 2018

It is a decent board for C2D. Seems like a lot of trouble too me unless your just a mod fiend.

Edwired · Dec 27, 2018

Yea it just i like to learn more in the motherboard voltage department. As i dont mind messing with the voltages as long it dont blow up parts lol. I like modding custom ideas that works for me

Atreides · Dec 27, 2018

I feel that I have a AN35 Ultra I'm modding.

Edwired · Dec 27, 2018

Any pictures of that

Is that your board
https://www.shuttle.eu/_archive/older/en/an35n.htm
Funny it said it have burn in protection only for athlonxp

Atreides · Dec 28, 2018

Yes that's the board and I can take pics of the mods in progress but not here as i should not clutter up the Xeon thread.

I killed most of the XP's with modded Abit's and one DFI.

lexluthermiester · Dec 28, 2018

Atreides said:
You should see my Athlon XP burnt underside collection.

While this isn't an Athlon thread, pictures would be interesting. Post them, unless anyone has any objections?

FireFox · Dec 28, 2018

lexluthermiester said:
Post them, unless anyone has any objections?

No objection over here :toast:

Atreides · Dec 28, 2018

Here are the admittedly poor pics of the AN35 mods in progress as spelled out here:http://www.xtremesystems.org/forums/archive/index.php?t-35833.html

I use wire glue for reasons. #1 I solder for crap. #2 reversible.

Edwired · Dec 28, 2018

Im trying to think what are you trying to do with the mods on the motherboard?

Ah jeez i see where lt going moar voltage for vcore and vdimm for better overclock

Atreides · Dec 28, 2018

Righto! Doing the vcore and vdimm first as I have XP's and crap DDR too kill but the thought of killing one the most underrated NF2 overclockers does not sit well.

System Name	Gentoo64 /w Cold Coffee
Processor	9900K 5.2GHz @1.312v
Motherboard	MXI APEX
Cooling	Raystorm Pro + 1260mm Super Nova
Memory	2x16GB TridentZ 4000-14-14-28-2T @1.6v
Video Card(s)	RTX 4090 LiquidX Barrow 3015MHz @1.1v
Storage	660P 1TB, 860 QVO 2TB
Display(s)	LG C1 + Predator XB1 QHD
Case	Open Benchtable V2
Audio Device(s)	SB X-Fi
Power Supply	MSI A1000G
Mouse	G502
Keyboard	G815
Software	Gentoo/Windows 10
Benchmark Scores	Always only ever very fast

Processor	E5-1680 V2
Motherboard	Rampage IV black
Video Card(s)	Asrock 7900 xtx
Storage	500 gb sd
Software	windows 10 64 bit
Benchmark Scores	29,433 3dmark06 score

Processor	E5-1680 V2
Motherboard	Rampage IV black
Video Card(s)	Asrock 7900 xtx
Storage	500 gb sd
Software	windows 10 64 bit
Benchmark Scores	29,433 3dmark06 score

System Name	The Blind Grim Reaper
Processor	Xeon X5675 Westmere-EP B1 SLBYL 4.20ghz @ 1.256v
Motherboard	Asus P6X58D-E
Cooling	Noctua CP12 SE14, Redux Noctua 1500rpm fan Arctic F14 x3 for intake and exhaust
Memory	Corsair XMS3 CMX4GX3M2A1600C9 x6
Video Card(s)	EVGA GTX 1060 6GB SC Single Fan Model
Storage	Crucial mx300 750gb main system + 1TB mx500 for games and music
Display(s)	22 inch samsung curved
Case	NZXT Phantom 530 black
Audio Device(s)	Nvidia HDMI through HDMI adaptor for output sound for turtlebeach x12 headset
Power Supply	Antec HCG 850 watt
Mouse	no brand
Keyboard	normal usb keyboard
Software	Windows 10 22H2 v1 (main is) and Windows 11 22H2 v2 on WD 250gb 7200rpm (testing purposes os)
Benchmark Scores	Cinebench R20 = 2046cb

System Name	The Blind Grim Reaper
Processor	Xeon X5675 Westmere-EP B1 SLBYL 4.20ghz @ 1.256v
Motherboard	Asus P6X58D-E
Cooling	Noctua CP12 SE14, Redux Noctua 1500rpm fan Arctic F14 x3 for intake and exhaust
Memory	Corsair XMS3 CMX4GX3M2A1600C9 x6
Video Card(s)	EVGA GTX 1060 6GB SC Single Fan Model
Storage	Crucial mx300 750gb main system + 1TB mx500 for games and music
Display(s)	22 inch samsung curved
Case	NZXT Phantom 530 black
Audio Device(s)	Nvidia HDMI through HDMI adaptor for output sound for turtlebeach x12 headset
Power Supply	Antec HCG 850 watt
Mouse	no brand
Keyboard	normal usb keyboard
Software	Windows 10 22H2 v1 (main is) and Windows 11 22H2 v2 on WD 250gb 7200rpm (testing purposes os)
Benchmark Scores	Cinebench R20 = 2046cb

Xeon Owners Club

mouacyk

dalekdukesboy

HUSKIE

dalekdukesboy

Edwired

Atreides

Edwired

Atreides

lexluthermiester

dorsetknob

"YOUR RMA REQUEST IS CON-REFUSED"

lexluthermiester

dorsetknob

"YOUR RMA REQUEST IS CON-REFUSED"

Edwired

Atreides

Edwired

Atreides

Edwired

Atreides

Edwired

Atreides

lexluthermiester

FireFox

The Power Of Intel

Atreides

Attachments

Edwired

Atreides

Processor	Intel i7 10700K
Motherboard	Asus ROG Maximus XII Hero
Cooling	2x Black Ice Nemesis GTX 480 - 1x Black Ice Nemesis GTX 420 - D5 VPP655P - 13x Corsair LL120 - LL140
Memory	32GB G.SKILL Trident Z RGB 3600Hz
Video Card(s)	EVGA GEFORCE RTX 3080 XC3 Ultra
Storage	Samsung 970 EVO PLUS 500GB/1TB - WD Blue SN550 1TB - 2 X WD Blue 1TB - 3 X WD Black 1TB
Display(s)	Asus ROG PG278QR 2560x1440 144Hz (Overclocked 165Hz )/ Samsung
Case	Corsair Obsidian 1000D
Audio Device(s)	I prefer Gaming-Headset
Power Supply	Enermax MaxTytan 1250W 80+ Titanium
Mouse	Logitech G502 spectrum
Keyboard	Virtuis Advanced Gaming Keyboard ( Batboard )
Software	Windows 10 Enterprise/Windows 10 Pro/Windows 11 Pro
Benchmark Scores	My PC runs FiFA