Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

[jordon.dias]

please add/expand dts studio sound for stereo mode to this package.that would be awesome............

 

[TheLostSwede]

Obrigado/Thanks Alan.

Can you tell if with this new driver the front panel is detected as headphone or as speakers? As I mentioned above if it's like speakers I lose the feature of my motherboard which is the amplification for headphones.

I guess the answer is yes and no. The headphone amp is working, but it's listed as speakers for some reason...

 

[ScrooW]

I guess the answer is yes and no. The headphone amp is working, but it's listed as speakers for some reason...

View attachment 115084

At least that was with the last version that Alan posted correct?

 

[AAF Optimus]

@ScrooW Last version in this link
This problem has been resolved here.

 

[ft5555]

not support for ALC269? installation not update to my ALC269.

HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_1BAB1509

 

[ScrooW]

@ScrooW Last version in this link
This problem has been resolved here.

Thanks for the attention Alan, I will test I had some problems too (older version) with the microphone, who is listening to me says that my voice seems robotic or sometimes tunes in anyway I will test this new versions and I come back here to give my feedback thanks again

-----

Edit:

Nothing done, install normal but the amplification and in this case the SB 720 did not work.

I am very frustrated because I see that everything is well done and that it would improve my immersion in what I like to do, play, music and watch movies.


Would you have any tips for me to try here?


--

http://imgur.com/Nk9nZJk

Edit 2:


It seems that I "lost" the amplification with the installation of this version, I removed the remaining drivers and applications and nothing, I installed another driver and it also did not work. The amplification worked even in the realtek basic driver that windows installs automatically. What a mystery haha I've been trying for about an hour and a half and not being able to reverse the situation.

 

[gtdani51]

any idea how to make the enhancements work with voicemeeter banana?

 

[Jimmy9303]

It's not mine, but big credits to posting from @jordon.dias for making finally a good driver

https://www.nsaneforums.com/topic/3...reative-sound-blaster-connect-x720-dolby-dts/

 

[dpg]

Try to consult the audio settings of your system, because your GUI may not support it.


If your MOD works properly, there is no need to upgrade.

Thanks for your creation.
Can you make a Realtek mod with Dts Audio + Dolby Atmos for Headphone .Movie,TV and gameing with EQ controlled from sound properties.

 

[erpguy53]

NEW REALTEK DRIVERS RELEASED
VERSION 6.0.1.8603 - HDA

Spoiler: DRIVERPACK #1 - WITH DOLBY PCEEv4 HOME THEATER

Spoiler: LINK TO DOWNLOAD

HERE

Spoiler: IMAGE

View attachment 114926

Spoiler: DRIVERPACK #2 - WITH DOLBY DS1 - DOLBY DIGITAL PLUS HOME THEATER

Spoiler: LINK TO DOWNLOAD

HERE

Spoiler: IMAGE

View attachment 114927

@TheLostSwede @erpguy53 TRY THIS
Realtek Fixed Control Panel. Classic Panel instead of the Manufacturer panel.

The proof is this post of @Aleksandar012
- "I also now have Realtek Control Panel instead of Asus."

GOOD RESORT

thanks Alan. maybe update your modded driver version to either 6.0.1.8619 or 6.0.1.8622 as I'm using the un-modded 8619 version from ASRock.
also update the Creative DLL modules (mbapo232.dll and mbapo264.dll) in your modded driver to v1.2.65.18 as you can find these versions packaged in this 8328 driver cab file from Microsoft.


I think the ASUS based Realtek control panel uses a different exe file - in this case (RtkNGUI64.exe) instead of the classic one (RAVCpl64.exe)
Open Task Manager (taskmgr.exe), look on the Details tab and pay attention to what CPL file is loaded when Windows starts up (either RAVCpl64.exe or RtkNGUI64.exe)


also edit the HDX.inf file in your modded driver and add these new IDs:
HDAUDIO\FUNC_01&VEN_10EC&DEV_1150
HDAUDIO\FUNC_01&VEN_10EC&DEV_0300
HDAUDIO\FUNC_01&VEN_10EC&DEV_0222
HDAUDIO\FUNC_01&VEN_10EC&DEV_0623
HDAUDIO\FUNC_01&VEN_10EC&DEV_0B00

 

[AAF Optimus]

NEW REALTEK DRIVERS RELEASED (VERSION: 6.0.1.8622)
LIST OF APOs:

• SOUND BLASTERX 720° (PLAY & RECORD)
• REALTEK NATIVE EFFECTS (PLAY & RECORD)
• SOUNZREALEXP / VOIZREALEXP (PLAY & RECORD)
• SAMSUNG SOUNDALIVE 3D (PLAY ONLY IN ANALOG INTERFACE)
• A-VOLUTE NAHIMIC 3 (PLAY & RECORD)
• DOLBY DIGITAL PLUS (PLAY IN ANALOG & DIGITAL INTERFACE)
• DOLBY PCEEv4 (ONLY IN DIGITAL INTERFACE)
• REALTEK ASIO DRIVER INTEGRATED

IN THE DIGITAL INTERFACE, THE DOLBY DIGITAL ENCODER IS PRESENT, THROUGH THE DOLBY PCEE4, BUT NOT ALONE. THERE ARE ALSO THE NATIVE EFFECTS OF REALTEK, A-VOLUTE NAHIMIC 3, DOLBY DIGITAL PLUS, ETC.

ENABLED THE STAND FOR 24 BIT ON ALL RECORDING POINTS, INCLUDING MICROPHONE.

DRIVERPACK DIGITALLY SIGNED BY ME, TEST MODE IS UNNECESSARY.

LINK FOR DOWNLOAD

Spoiler: IMAGES

SOUNZREALEXP:

SOUNZREAL / VOIZREAL EXP CONFIG:

BLASTERX 720°:

NAHIMIC 3 (PLAY E REC):

SPECIAL MIC EFFECTS:

SUPPORT FOR 24BIT IN MICROPHONE:

SAMSUNG SOUNDALIVE 3D:

VIA HD AUDIO EFFECTS FOR VIA DRIVERS:

VIA EQUALIZER (VIA EFFECTS):

VIA ROOM CORRECTION (VIA EFFECTS):

VIA ENVIRONMENT MODELING (VIA EFFECTS):

DOLBY DIGITAL PLUS (SYSTEM AUDIO CONFIG) (IN ANALOG INTERFACE):

DOLBY DIGITAL ENCODER ENABLED (WITH REALTEK EFFECTS AND ETC.):

DOLBY DIGITAL PLUS (SYSTEM AUDIO CONFIG) (IN DIGITAL INTERFACE):

DOLBY PCEE4 (ONLY IN DIGITAL INTERFACE):

REALTEK EFFECTS (IN DIGITAL INTERFACE):

DOLBY DIGITAL PLUS PROGRAM (WORKING IN ANALOG & DIGITAL AUDIO)

GOOD RESORT FOR ALL INTERESTED MEMBERS.

 

[Aleksandar012]

Thanks Alan,
everything work.No problem with headphones and speakers.
Note to users
VIA HD audio enhancement are not equal to Realteks.
If you using surround system:
VIA Equalizer will be expanded to all speakers,not just front speakers like in Realtek equalizer.
VIA Speaker Fill will expand crystal clear stereo sound to all speakers without echoes and reverberations(just like Creative CMSS Stereo Surround)
VIA Bass Management have options to control frequency and bass boost.

 

[alanfox2000]

unfortunately, the Realtek control panel interface is HARDCODED, based on Realtek ALCxxx chipset and hardware ID number, TheLostSwede. you will always get an ASUS based Realtek control panel because you are using an ASUS motherboard and will never get the "classic" one like this.

and when I install ANY Realtek audio driver (modded or UNmodded) on a Gigabyte board (like the GA-78LMT-USB3 R2 board I have), I get THIS kind of Realtek control panel with a GIGABYTE logo on it. [hardware ID is "HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_1458A182", audio chip is ALC892]

AND even my friend's ASUS M5A78L-M LE/USB3 board uses this kind of Realtek control panel (hardware ID on his ASUS board is "HDAUDIO\FUNC_01&VEN_10EC&DEV_0887&SUBSYS_10438576" - audio chip is ALC887)

View attachment 114784

To force classic Realtek GUI, download test unity. It will geranate a file call rtkhdaud.dat in C:\Windows\System32\drivers folder.



@Alan Finote , can you tell us what checkbox I needed to tick on test utility driver policy tab to unlock thirty party APOs? Because your RTKHDAUD.dat is based on your PC Realtek audio chipsets driver policy, it may cause problems if someone use your RTKHDAUD.dat.

 

[jordon.dias]

how to install and use nahimic 3 control panel( user interface).please guide a bit

 

[AAF Optimus]

To force classic Realtek GUI, download test unity. It will geranate a file call rtkhdaud.dat in C:\Windows\System32\drivers folder.

View attachment 115832

@Alan Finote , can you tell us what checkbox I needed to tick on test utility driver policy tab to unlock thirty party APOs? Because your RTKHDAUD.dat is based on your PC Realtek audio chipsets driver policy, it may cause problems if someone use your RTKHDAUD.dat.

Well, before, it was yes, now it is not anymore, since, really, many users have had problems with older driver packages, but let's go to what matters:

First, to activate Samsung SoundAlive 3D: DrvCtrl16> SupportSA.

Enable SounzRealEXP and VoizRealEXP: DrvCtrl21> RtkSoundzReal, RtkVoizReal.

Activating this interface, which integrates everything into one: DrvCtrl21> RtkPresetUI.

Jack Settings (Connectors):
Disable Front Panel Detection: JackCfg> DisFPJD.

Display Dialog for Disabling Front Panel Detection: JackCfg> ShowDisableFPJD.

Force Deactivation of Front Panel Detection: DrvCtrl2> ForceDisableFrontPanelJD.

No audio on the internal speaker, when the rear panel has been set (connected) to the output device: JackCfg> FinRMute, FinRMuteSupport, RearInMuteInternal, RearInMuteInternalSupport.

Oh, I'm already forgetting: Enable 24bit support for record: DrvCtrl20> Vista24bitRecord; DrvCtrl44> Support24bitRecOnIntMic

And there's a lot more ..

 

[Sveni-Go]

I have a problem with the speaker setting. at 5.1 he shows the side speakers and from the back no sound comes.
I have ALC889

 

[dpg]

I have used your driver signed by you.
Functions perfectly. RealtekDriverSBCSADS1SZVZ.exe
Now I would request you to develop realtek with Dolby Atmos ,Dts headphone x v2,THX ETC ALL MOVIE SOUND FORMAt.For HTPC

 

[Vyper99]

i couldn't hold back much longer, i just made an account to say thank you Alan! it's so refreshing to hear some good quality sh!t from my on-board Soundcard! the original driver of my system was so annoying, every time i plug my headphones it would bring up 2 mods one hoarse your eardrums, and the other one wasn't better either so at the end thank you very much!
sorry for any grammar mistake guys, i cant speak English so well..

 

[DruiD]

So does anyone else have successful simultaneous (separate audio outputs etc ) both REAR and FRONT jacks working with this driver?
@Alan Finote really appreciate the ongoing work - this is the best one yet, but I still cannot get front and rear working at the same time.

Questions below for Alan and wider community - lets all chip away at these items to help Alan and other modders.

Question #1
UNMODDED Asus\Realtek drivers - when you plug in the front audio (with the "separate jack \ independent" option turned on) you get ACTUAL separate tabs in the sound manager for the new front audio - and retain the rear audio - and can output different sounds\music to those separate sound outputs - eg background music via rear output - gaming via front head phone output etc.

With all these modded drivers, (btw - not just yours) the "Front" audio" - still takes over the rear audio - doesn't open a new tab - and disables the rear audio sound...irrespective if the option for independent jacks is enabled. Any ideas?

Question #2 - just like @Sveni-Go - my analog (3x 3.5mm) for 5.1 output - used to work as Front Left, Front Right, Centre, REAR Left, REAR right (for 5.1) - now the new drivers are making the 5.1 surround as Front Left, Front Right, Centre, SIDE Left, SIDE Right. 5.1 surround audio movies\games its still sending sound (in 5.1) out the REAR channels (vs side) - meaning I only effectively hear 3.1 (Front L, Front R, Centre & Sub) as the "rears" are disabled \ greyed out in the new Modded drivers.

Could the Sides and Rears (in 5.1) possibly be somehow switched incorrectly in the modded driver? Note:- in 4.1, 5.1, 7.1 etc configurations of my motherboard the "Rear" channels are always plugged in via the "rear black" connector. https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/MAXIMUS_VIII_HERO/E10343_MAXIMUS_VIII_HERO_UM_WEB.pdf - Page 2-16 for reference.
Note:- haven't tried dolby\digital out as I dont have a digital 5.1 or 7.1 speaker system (just 5.1 dolby Astro A50 headset).

To help - I decided to do a bunch of screenshots to illustrate my points #1 and #2 above. This meant uninstalling all the new modded stuff, doing a full cleanup, then reinstalling my older Asus drivers.

Point of Clarity for Screenshots
My "Speakers" "Headphones" and "Astro 5.1 optical" in the screenshots below - have all be RE-named like that within Windows Audio devices for my benefit. Typically it will probabily just say "front audio" instead of "front headphones": etc and "5.1 speakers" - probabily just say "speakers". - so bear in mind those names are due to my manual renaming - not a driver thing etc.


Point #1 - Separate audio playback devices for front\rear audio - how it looks in my Stock ASUS Drivers
This 1st screenshot.. showing default mode - no separate channels.. just showing my 5.1 analog speakers and optical Astro headphones intially.
- turning on the setting to separate playback 'streams' - looks like the same option available in the modded versions (except for the Asus branding)

Then - you get the headphone "popup"

Then this version of Asus Supreme\Realtek it performs an Ohm scan of your headphones , correctly picking my BeyerDynamic DT 770 PRO (80 Ohms) as 79 Ohm (margin of error).
- would love that in the modded versions - but assume its a add-on from Asus Supreme FX etc due to the high power separate Headphone AMP?

Then - a SEPARATE front headphones icon is shown in sound manager as a NEW sound output option, separate to 5.1 speakers icon (which are still there)
- note it shows the analog front port 'green' active as well as the other 5.1 rear ports active
- note it also shows the Ohm and driving stage (I can drive up to 600Ohm headhones apparently, how 'well' is another story).

So thats all screenshoits for Point #1 - I cannot reproduce this process CORRECTLY in any modded drivers.
In MODDED Drivers - Once a front audio \ front headphones is plugged in
- the separate "Front headphones" or "Front audio' tab NEVER appears (in the modded realtek sound manager) - unlike Asus , Gigabyte drivers
- the ACTUAL "Speakers" rear output is disabled completely until you unplug the "Front audio\Front headphones"
- the existing "Speakers" tab (in the modded realtek sound manager) simply drive the front audio
- the existing "Speakers" tab (in the modded realtek sound manager) - does not get renamed or anything - stays as "5.1 Speakers" in my case
- the existing "Speakers" tab (in the modded realtek sound manager) - then controls the "front audio\front headphones" volume etc.


Point #2 -Analog 5.1 connected speakers REAR speakers Vs SIDE Speakers
- in all realtek based, asus gigabyte equipment I can get my hands on right now - all follow the "REAR" speaker format for what is the 5.1 surround 'back' speakers - not the "SIDE"

 

[Xeonic]

Thanks, everything works very well! With the exception of BLASTERX 720, can you help me?

 

[DruiD]

Thanks, everything works very well! With the exception of BLASTERX 720, can you help me?

@Xeonic - do you have my problem - front audio and rear audio not able to be seaprate channels?

With regards to YOUR problem - I only had that message when the realtek driver wasnt being installed properly OR i needed to reset my default audio source reboot, reset default and restart Sound Blaster 720 (but that only happened once and another reinstall time) - over the last 8-9 days I have installed 5-6 different driver packs, stock drivers, custom motherboard drivers - cleanup and fresh install between each - but not suprised I had a addon issue but only had that creative issue once\twice - clean reinstall fixed it.

 

[vestelar]

Hi @Alan Finote. First of all thank you very much for your work, your drivers works perfectly for me in the past. With this last driver, in my Digital Interface I don't have the "Dolby Home Theater v4" screen, instead of it I have a "Dolby Advanced Audio v2". Why is this happening and what are the diferencies? On the other hand, I don't have the "Dolby Digital" or "DTS" in the Realtek panel (I don't know if this is normal or not neither) Thank you!!

 

[AAF Optimus]

Hi @Alan Finote. First of all thank you very much for your work, your drivers works perfectly for me in the past. With this last driver, in my Digital Interface I don't have the "Dolby Home Theater v4" screen, instead of it I have a "Dolby Advanced Audio v2". Why is this happening and what are the diferencies? On the other hand, I don't have the "Dolby Digital" or "DTS" in the Realtek panel (I don't know if this is normal or not neither) Thank you!!

Friend, to activate the Dolby Home Theater, go to the "Dolby Advanced Audio v2" page, click "Masters" and select all the options, including the last four, and that's it.

 

[Virion]

I have doubts about this file.

 

[AAF Optimus]

I have doubts about this file.

View attachment 115866

This is because there is a command at startup of the installation wizard, which is used to install the certificate used to sign the drivers. It's a false positive. I can tell you this because I compiled this installer.