- Joined
- Apr 20, 2017
- Messages
- 304 (0.11/day)
System Name | Dell Inspiron 7375 |
---|---|
Processor | AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics |
Memory | 16GB (total) 2400MHz DDR4 SODIMM |
Video Card(s) | Radeon™ RX Vega 10 Graphics |
Storage | SanDisk X600 SATA SSD 512GB |
Display(s) | BOE NV13FHM |
Audio Device(s) | Realtek ALC3253 (Dell Labelling) ALC255 (Real name) |
For Dolby atmos I think you have to first enable 5.1 processing by editing system32\dolbyaposvc\default.xml first. It is configured for 2 channels on stock settings.@Virion you must run bat file or first install product settings then install appx
But Remember that dts headphone x, nahimic, dolby atmos are enhancers for stereo channel configuration i thing that nahimic can work in multichannel configuration but affects only front speakers
basically for headphone user Gameing and Movies.@Virion you must run bat file or first install product settings then install appx
But Remember that dts headphone x, nahimic, dolby atmos are enhancers for stereo channel configuration i thing that nahimic can work in multichannel configuration but affects only front speakers
@CityCultivator yes you can modified the xml but is remember that this is not surround sound upmixer like dolby home theatre v4
@CityCultivator yes you can modified the xml but is remember that this is not surround sound upmixer like dolby home theatre v4
@OMER sure its better you can also see the functionality what like extra dolby home theater v4 have and what another plugins does not have but new ui and design
So that means older dolby home theatre v4 is better than all latest dolby uwp drivers
@CityCultivator yes you can modified the xml but is remember that this is not surround sound upmixer like dolby home theatre v4
@OMER sure its better you can also see the functionality what like extra dolby home theater v4 have and what another plugins does not have but new ui and design
@OMER in my mod all these plugins work together over speakers analog only dolby home thater v4 and dolby digital plus work on spdif
You must set all plugins to music and only one to movie and you can also disable someone who dont need to use
System Name | Dell Inspiron 7375 |
---|---|
Processor | AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics |
Memory | 16GB (total) 2400MHz DDR4 SODIMM |
Video Card(s) | Radeon™ RX Vega 10 Graphics |
Storage | SanDisk X600 SATA SSD 512GB |
Display(s) | BOE NV13FHM |
Audio Device(s) | Realtek ALC3253 (Dell Labelling) ALC255 (Real name) |
<endpoint type="internal_speaker" brand="Generic" model="Default" operating_mode="normal" fs="48000" total_count="6" front_count="3" side_count="2" height_count="0" has_subwoofer="1">
<surround-decoder-enable value="1"/>
@Dj Urko It is surround sound upmixer; properly configured it upmixes audio to all channels, including side/rear channels. I use it for upscaling stereo-5.1 on my audio system.
check those settings:
For 5.1
Also check this:Code:<endpoint type="internal_speaker" brand="Generic" model="Default" operating_mode="normal" fs="48000" total_count="6" front_count="3" side_count="2" height_count="0" has_subwoofer="1">
All previous settings such as headphone surround virtualiser, dialog enhancer, volume leveler, graphic equaliser is present in xml.Code:<surround-decoder-enable value="1"/>
Only missing is three additional Intelligent Equaliser presets.
I stopped using PCEE4 for audio processing because is has a defect that I cannot personally accept: It cannot handle float audio data properly; audio samples louder than 0dBFS clips with PCEE4. This bug was removed in all later versions od Dolby software.
System Name | Dell Inspiron 7375 |
---|---|
Processor | AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics |
Memory | 16GB (total) 2400MHz DDR4 SODIMM |
Video Card(s) | Radeon™ RX Vega 10 Graphics |
Storage | SanDisk X600 SATA SSD 512GB |
Display(s) | BOE NV13FHM |
Audio Device(s) | Realtek ALC3253 (Dell Labelling) ALC255 (Real name) |
Center speaker is in front, thus it is considered as a special front speaker.Shouldn't 5.1 speakers be 3 fronts because a left, Center, Right. 2 sides/rear: left rear and right rear. 1 sub
Instead of what @alanfox2000 said on pg 30 on making a enhancers thread, which is 5.1 speakers: total_count="5" front_count="2" side_count="2" height_count="0" has_subwoofer="1"
?
So 6 chn count instead of 5 chn count in the XML preset?Center speaker is in front, thus it is considered as a special front speaker.
System Name | Dell Inspiron 7375 |
---|---|
Processor | AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics |
Memory | 16GB (total) 2400MHz DDR4 SODIMM |
Video Card(s) | Radeon™ RX Vega 10 Graphics |
Storage | SanDisk X600 SATA SSD 512GB |
Display(s) | BOE NV13FHM |
Audio Device(s) | Realtek ALC3253 (Dell Labelling) ALC255 (Real name) |
You see the math. Total count=6.So 6 chn count instead of 5 chn count in the XML preset?
i see. i don't know why @alanfox2000 said at #692 post on making-audio-enhancers-work-on-windows pg 29You see the math. Total count=6.
Dolby considers the 5.1 to be a 6 channel system, just one channel limited to low frequency.
System Name | Dell Inspiron 7375 |
---|---|
Processor | AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics |
Memory | 16GB (total) 2400MHz DDR4 SODIMM |
Video Card(s) | Radeon™ RX Vega 10 Graphics |
Storage | SanDisk X600 SATA SSD 512GB |
Display(s) | BOE NV13FHM |
Audio Device(s) | Realtek ALC3253 (Dell Labelling) ALC255 (Real name) |
This is old debate. We had a discusssion afterward, and though if I recall properly alanfox did not confirm my response explictly, the configuration for Dolby Atmos by him/her was changed.i see. i don't know why @alanfox2000 said at #692 post on making-audio-enhancers-work-on-windows pg 29
For 5.1 or 7.1 speakers - Dolby DAX API Service 3.xxxxx.yyy.z
change from total_count="2" front_count="2" side_count="0" height_count="0" has_subwoofer="0" to
5.1 speakers: total_count="5" front_count="2" side_count="2" height_count="0" has_subwoofer="1"
7.1 speakers: total_count="7" front_count="2" side_count="2" height_count="2" has_subwoofer="1"
when i all i heard and read that 5.1 is 6 channel system.
Okay, as long as he changed then it is confirmed for dolby uwp apps. I knew 5.1 was 6 channels. But didn't know that the configuration changed on Alanfox's page.This is old debate. We had a discusssion afterward, and though if I recall properly alanfox did not confirm my response explictly, the configuration for Dolby Atmos by him/her was changed.
System Name | Dell Inspiron 7375 |
---|---|
Processor | AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics |
Memory | 16GB (total) 2400MHz DDR4 SODIMM |
Video Card(s) | Radeon™ RX Vega 10 Graphics |
Storage | SanDisk X600 SATA SSD 512GB |
Display(s) | BOE NV13FHM |
Audio Device(s) | Realtek ALC3253 (Dell Labelling) ALC255 (Real name) |
Not sure. Have to listen to see.Okay, as long as he changed then it is confirmed for dolby uwp apps. I knew 5.1 was 6 channels. But didn't know that the configuration changed on Alanfox's page.
I wonder if using a channel less made a difference in sound.
Thing that bothers me is that the configuration is set when downloading the original presets on puresoftapps. Like for 2.1Not sure. Have to listen to see.
Windows do have a way to tell APOs upstream that the next filter down has a specific speaker configuration. Dolby Digital Plus, PCEE4 uses that; SRS Premium Sound uses that. This is why DDL works. The DDL APO sets a new speaker configuration for APOs upstream to use.
Why this xml setting is beyond me.
System Name | Dell Inspiron 7375 |
---|---|
Processor | AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics |
Memory | 16GB (total) 2400MHz DDR4 SODIMM |
Video Card(s) | Radeon™ RX Vega 10 Graphics |
Storage | SanDisk X600 SATA SSD 512GB |
Display(s) | BOE NV13FHM |
Audio Device(s) | Realtek ALC3253 (Dell Labelling) ALC255 (Real name) |
Most 2.1 plugs with a single 3.5mm wire. They are essentially 2.0 system with a central sub. For these systems, 2.0 stock settings must be used.Thing that bothers me is that the configuration is set when downloading the original presets on puresoftapps. Like for 2.1
It supposed to be this 2.1 speakers: total_count="4" front_count="3" side_count="0" height_count="0" has_subwoofer="1"
But in preset 2.1 is total_count="2" front_count="2" side_count="0" height_count="0" has_subwoofer="0">
I was wondering, not that the 2.1 configuration matters to me, since I have 5.1 surround sound with Logitech z506.Most 2.1 plugs with a single 3.5mm wire. They are essentially 2.0 system with a central sub. For these systems, 2.0 stock settings must be used.
System Name | Dell Inspiron 7375 |
---|---|
Processor | AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics |
Memory | 16GB (total) 2400MHz DDR4 SODIMM |
Video Card(s) | Radeon™ RX Vega 10 Graphics |
Storage | SanDisk X600 SATA SSD 512GB |
Display(s) | BOE NV13FHM |
Audio Device(s) | Realtek ALC3253 (Dell Labelling) ALC255 (Real name) |
Probably the settings are still not updated.I was wondering, not that the 2.1 configuration matters to me, since I have 5.1 surround sound with Logitech z506.
The settings for Dolby or Windows?Probably the settings are still not updated.