The Ultimate Realtek HD Audio Driver Mod for Windows 10

[Mittenz]

Atmos is working fine for me.

 

[Mason76]

if i install alan realtek driver my wifi(intel) on nootebook work is very bad!why?

 

[CityCultivator]

if i install alan realtek driver my wifi(intel) on nootebook work is very bad!why?

Q1: Are you sure its the modded drivers that's causing problems? How do you know?
Q2: Describe "bad". What do you mean? A yellow icon in device manager? Are hotspots detected? Wifi does not connect at all even if hotspots are detected?
Q3: Are you using the latest Intel Wifi drivers?

 

[philrj]

Hi there i just make all pass to install this driver and not worked.
My Mobo is that
GA-H270M-Gaming-3-rev-10

 

[Hristov RH-Records]

An Experimental Project will Coming soon...

 

[CityCultivator]

An Experimental Project will Coming soon...View attachment 118564

Any spoilers of major changes?

 

[Hristov RH-Records]

@CityCultivator I just try to add sound blaster plugin in the next driver update

 

[Juggler]

@CityCultivator I just try to add sound blaster plugin in the next driver update

Hopefully you will be able to answer my question on why does Soundblaster always loses the settings after restarting computer.

 

[CityCultivator]

@CityCultivator I just try to add sound blaster plugin in the next driver update

Are you also going to apply soundblaster on capture endpoints?

 

[dpg]

An Experimental Project will Coming soon...View attachment 118564

DTS Digital Entertainment + X headphone
Dolby Atmos Gameing + Dolby headphone.
Driver for
Entertainment and Gaming.

 

[Wildthing]

@Dj Urko Optimiser and Regulator crash and close when I try to click on it and Dts don't work when i click it nothing happen
any suggest?
I followed this procedure
1. remove old driver and enable TEST Mode via Command Promt (Read Disabling.docx in Plugins folder) then restart the PC.
2. Install DTS APO GUI First then Sign out and up the PC.
3. Install the driver mod using Setup normal then restart the PC.
4. Install all the Plugins in folder Plugins such as Nahimic, Dolby digital plus HT, DTPC(content assets only), Dolby Atmos for Gaming. That's All

 

[Hristov RH-Records]

So There is New Driver on My Link in Page 1. Sound Blaster 720 is Already integrated. Other Plugins Are Dolby PCEE4, Dolby Digital Plus, Dolby Atmos for Gaming, DTS Studio Sound, Nahimic. Dolby Digital Output Via SPDIF.

I Guide To Install the Driver and Plugins
1. Unninstall the old Driver via Programs in Control panel then Restart the PC.
2. Verify that SecureBoot is disabled via Bios or UEFI Setup.
3. Open CMD via Administrator and type two commands to Enable Test Mode:
a. bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS then press Enter.
b. bcdedit -set TESTSIGNING ON then press Enter.
4. Close CMD and Restart the PC.
5. Install DTS APO GUI from folder Plugins then Sign Out and UP the PC.
6. Copy the folder Creative to C:\ProgramData
7. Enable Developer Mode from Windows Settings - Update - For Developers.
8. Install Creative Sound Blaster Connect
9. Install Dolby Atmos for Gaming
10. Install the Driver Using Setup then Restart or Sign Out and Up the PC.
11. Install DTPC from folder Dolby Tuning and Profile Creator (check only Content assets)
12. Run A2-V4 RegPath
13. Install DolbyDigitalPlusHT
14. Install Nahimic and Product settings
15. Sign Out and UP the PC
II Guide for Better Sound Quality
1. set Dolby Home Theater v4 to Music
2. set Dolby digital plus to Music with Dialog Enabled
3. set Dolby Atmos to Game With All Sliders to 30%
4. Set DTS Studio Sound to Headphone X with Stereo Preference In Front
5. Ajust Litle bit Nahimic (Voices 3 Bass 2 Treble 1)

@Wildthing Uninstall this Driver And Try the New Package on My Link

 

[Mason76]

So There is New Driver on My Link in Page 1. Sound Blaster 720 is Already integrated. Other Plugins Are Dolby PCEE4, Dolby Digital Plus, Dolby Atmos for Gaming, DTS Studio Sound, Nahimic. Dolby Digital Output Via SPDIF.

I Guide To Install the Driver and Plugins
1. Unninstall the old Driver via Programs in Control panel then Restart the PC.
2. Verify that SecureBoot is disabled via Bios or UEFI Setup.
3. Open CMD via Administrator and type two commands to Enable Test Mode:
a. bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS then press Enter.
b. bcdedit -set TESTSIGNING ON then press Enter.
4. Close CMD and Restart the PC.
5. Install DTS APO GUI from folder Plugins then Sign Out and UP the PC.
6. Copy the folder Creative to C:\ProgramData
7. Enable Developer Mode from Windows Settings - Update - For Developers.
8. Install Creative Sound Blaster Connect
9. Install Dolby Atmos for Gaming
10. Install the Driver Using Setup then Restart or Sign Out and Up the PC.
11. Install DTPC from folder Dolby Tuning and Profile Creator (check only Content assets)
12. Run A2-V4 RegPath
13. Install DolbyDigitalPlusHT
14. Install Nahimic and Product settings
15. Sign Out and UP the PC
II Guide for Better Sound Quality
1. set Dolby Home Theater v4 to Music
2. set Dolby digital plus to Music with Dialog Enabled
3. set Dolby Atmos to Game With All Sliders to 30%
4. Set DTS Studio Sound to Headphone X with Stereo Preference In Front
5. Ajust Litle bit Nahimic (Voices 3 Bass 2 Treble 1)

@Wildthing Uninstall this Driver And Try the New Package on My Link

can you make your sound enhancement pack just by installing the exe realtek file? after the driver of Alan, I still have a modernized realtek panel, how do I get the stock back? (

 

[Hristov RH-Records]

@Mason76 all my driver mods uses Stock control panel

 

[Mason76]

@Mason76 all my driver mods uses Stock control panel

I still have a sound bar from Alan for some reason! I deleted the driver! How to return the panel? (Do you make your mod a simple exe file?

 

[Wildthing]

@Dj Urko same situation...

 

[gerardfraser]

@Dj Urko
Thank you for sharing.

 

[Planr]

Hello, I am a Windows 10 Home edition user who has been having considerable trouble getting their audio drivers to work.
Every time a new Windows 10 update comes out, it seems to automatically reset my audio drivers to factory default, and wipe my Realtek Advanced HD Audio drivers I got from this thread several months ago.

My old drivers I got from here a few months ago no longer seem to work, so I was wondering how I could go about installing the latest update for the driver.

However, I am not very good at the technical sides of Windows 10, so I am unsure how to follow the directions in the OP that @Dj Urko mentioned above.
Nearly all of the steps are very confusing to me, and I wish it could all be installed in one go with an executable.
Is there any way I can do that? I want to have good audio drivers for my computer but I don't know how to do all this technical stuff.

 

[Mason76]

Can you add a simple exe setup file with realtek driver and you mods?

 

[ToniM_8]

@Dj Urko After restart i have no sound.

 

[Hristov RH-Records]

@Sonyboi you must do exact what is writing in the guide and you must little bit wait

 

[ToniM_8]

@Dj Urko I'll try

 

[consoled]

DJ Urko driver is getting better and better. Good

 

[ScrooW]

@Dj Urko


Does this new driver contain only the soundblaster integration or is there something else? corrections, improvements, etc.

 

[Hristov RH-Records]

@ScrooW yes correction and improvements for PCEE4 and DDP Improvements for 2nd Headphones and Sound blaster integration