- Joined
- Sep 18, 2014
- Messages
- 424 (0.12/day)
- Location
- 620004
System Name | Blackbelt 2 |
---|---|
Processor | AMD FX 8350 |
Motherboard | ASUS M5A99FX PRO R 2.0 |
Cooling | Cooler Master Hyper TX3 evo |
Memory | 8GB Corsair Value Select DDR3 |
Video Card(s) | ASUS R7260X DC2OC 2GB |
Storage | INTEL 530 series SSD 120 GB, Seagate Barracuda 1 TB 7200 RPM |
Display(s) | DELL ST 2240L |
Case | Cooler Master Elite 311 |
Power Supply | CORSAIR VS Series 550W |
Software | Windows 7 Ultimate 64 Bit |
Benchmark Scores | 3DMark 11 6532 |
Hi..I am in the middle of an ongoing Ryzen build...my motherboard is an Asus prime B450M-A which has a 12v rgb header for led strips... I will be using a Corsair Carbide 175R mid tower case for the system...now the 175R comes with a single front 120mm RGB fan..the fan has 2 cables, a 3 pin fan power cable & a 4 pin RGB cable marked 12v and an arrow over pin 1.....
Now i have connected the 3 pin cable to my motherboards' case_fan header and the fan spins normally....but the rgb leds do not light up...can i connect the 12v rgb 4 pin cable to the 12v rgb header on the motherboard or do i risk damaging the mb or fan..
The Corsair Carbide 175R case manual tells you to connect the 4 pin rgb cable to the motherboard header though...
Now i have connected the 3 pin cable to my motherboards' case_fan header and the fan spins normally....but the rgb leds do not light up...can i connect the 12v rgb 4 pin cable to the 12v rgb header on the motherboard or do i risk damaging the mb or fan..
The Corsair Carbide 175R case manual tells you to connect the 4 pin rgb cable to the motherboard header though...