Post your Cinebench R23 Score

[Zyll Goliat]

I'm using HP's Z400 motherboard so I haven't got much headroom for overclocking, and no voltage adjustment so I've only got 1.2v to play with on this board - max I can get it to with 1.2v is 3.8Ghz and is stable in games and most benchmarks but long prime 95 crunching and !BLAM! BSOD!

The CB R20 score was done with all cores set to 3.7Ghz as any higher and the VRM trips and BSOD's me, if it's CB R15 I can run it at 3.8Ghz which scores around 900.

The chip can do 4.4Ghz @ 1.37v pretty easy on my friends Rampage Extreme III X58 board I can also run the RAM at 1600mhz through XMP, the HP board limits me to 1333mhz. It's just a shame that there's no cheap X58 boards on eBay, they've held their price for so long that it would be financially ridiculous to buy one these days.

I have an E5-1660 v2 in a drawer at mine, just waiting on an X78 board to be delivered from china to step up platforms. Should be nice then, I can overclock some IVB-EP goodness.

Nice....I have also here Ryzen 1700 platform but still thinking about IF I am going to keep it or flip it as I am also curious maybe to get some X79,not easy to find cheap&good mobo.....Will see I am still also more than happy with my X58 platform..........

 

[MrGRiMv25]

Nice....I have also here Ryzen 1700 platform but still thinking about IF I am going to keep it or flip it as I am also curious maybe to get some X79,not easy to find cheap&good mobo.....Will see I am still also more than happy with my X58 platform..........

Yeah, I love my old W3680, an unlocked Xeon is madness, just wish the X58 boards were cheaper considering their age, that's why I went down the X79 route with an IVB-EP CPU - the cost of the new system was only £230'ish, £80 for the E5-1660 and 4GB DDR3-1600, £20 for a Corsair PSU from a mate, and another 20-30 for a case from the same person, then it's £79 for the X79 board which is quite weird since the price matches the platform name haha...

The board I'm getting is a Chinese brand X79 but it's surprisingly solid, it has NVME boot, quad channel DDR3 and overclocking options, seen a few youtubers reviewing them and they're stable as hell considering a lot of Chinese boards are a bit flimsy. It's pretty easy to get a bad one but there's a few good ones out there if you do your looking around and homework etc

This is the board ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
www.youtube.com/watch?v=F-OgMAzAxO4

 

[GamerGuy]

Managed 7803 with CPU at 4.4ghz @ 1.375v

 

[Voltaj .45 ACP]

3800X
R 20 5391
4.450 MHz @1.363V

with a bit of LLC4 and the 1.891 CPUZ

View attachment 130228

well done.oh 3800x you're using.now i saw with 1.89.1. i wonder what will you do with agesa 1.0.0.4?

 

[speedgoat]

well done.oh 3800x you're using.now i saw with 1.89.1. i wonder what will you do with agesa 1.0.0.4?

after all this trouble to get this working i dont think im changing an agesa ever again

 

[Lionheart]

Pretty low score for a 3900X it seems comparing it against the others. I only just got it, was having CPU fan ramping up issues, updated the bios & made my own fan curve in the bios, solved that issue, also tinkered with some voltage & power plan settings also, probably explains the score I guess.

PS ignore the low clock speed in CPU-Z, was idling while screenshotting.

 

[igralec84]

Here are my 3600X scores, no OC, running 1.0.0.3 ABB bios, custom loop cooling

 

[Voltaj .45 ACP]

after all this trouble to get this working i dont think im changing an agesa ever again

you should because 1.0.0.4 and later will change everything like cpu won't gonna mad and 4.5 ghz when you touch the mouse.

 

[AlienIsGOD]

here is my score in a stock R7 2700

 

[Deleted member 178884]

1.8v input voltage, 1.21v core, HT off, 4.7ghz silent loop 280mm, no delid.

 

[Mamya3084]

4.1Ghz, Custom loop, Memory @ 3600Mhz CL17

 

[star4870]

 

[phanbuey]

1.8v input voltage, 1.21v core, HT off, 4.7ghz silent loop 280mm, no delid.
View attachment 130364

Nice chip man.

 

[barra]

can't quite crack 3k on my 15in laptop. Undervolted CPU by -0.18v and memory overclocked to CL17 3200mhz

 

[JuicerP]

8700K 5.0 ghz 1.32V AIO
Cinebench R20.060: 3963

Intel Core i7 8700K @ 5001.2 MHz - CPU-Z VALIDATOR

[1hqf3d] Validated Dump by Josh Fischer (2019-09-04 15:31:15) - MB: ASRock Z390 Taichi - RAM: 32768 MB

valid.x86.fr

First attempt, haven't tweaked much yet.

 

[TwanTony]

I don't know how to post my score but I got 3750 on CPU then 404 on single core. My setup is Ryzen 2700x 8c/12t with Air cooling (stock cooler called cooler one lol) it was also running at regular base of 3.7 GHZ

 

[NoJuan999]

Ryzen 7 3700x (PBO enabled), G.Skill TridentZ C16 @ 3200 Mhz on Arctic 33 eSports Dual Fan Cooler.
4860 Multi core (cores Boosting between 4.25 and 4.3 GHz)
498 Single core (4.375 GHz)

http://imgur.com/mja5k5V

 

[Voltaj .45 ACP]

Ryzen 7 3700x (PBO enabled), G.Skill TridentZ C16 @ 3200 Mhz on Arctic 33 eSports Dual Fan Cooler.
4860 Multi core (cores Boosting between 4.25 and 4.3 GHz)
498 Single core (4.375 GHz)

http://imgur.com/mja5k5V

stock(pbo), D15 Se

 

[phanbuey]

stock(pbo), D15 Se

View attachment 131413

That single core IPC tho. My puny 11mb cache cant keep up. @4.7 Ghz w/ daily driver power settings.

 

[Duvar]

Here you have the scores of my 3600:

 

[NoJuan999]

stock(pbo), D15 Se

https://www.techpowerup.com/forums/attachments/131413/

Nice, the best I did so far was 4901 Multi-core and 504 Single core.
I'll post another screen in a few weeks after the new AGESA comes out and I update my BIOS and tweek my RAM.
I had my RAM running at 3400 MHz on my OC'd 2600 and I'm hoping I can get it there again.
That 3766 RAM speed seems to be helping, I may have to get some 3600 MHz RAM at some point.

 

[Voltaj .45 ACP]

That single core IPC tho. My puny 11mb cache cant keep up. @4.7 Ghz w/ daily driver power settings.
View attachment 131420

480 not bad for daily.mine is daily too.i have another pics "not daily" like 4000 cl16 1.5v.no way..

Nice, the best I did so far was 4901 Multi-core and 504 Single core.
I'll post another screen in a few weeks after the new AGESA comes out and I update my BIOS and tweek my RAM.
I had my RAM running at 3400 MHz on my OC'd 2600 and I'm hoping I can get it there again.
That 3766 RAM speed seems to be helping, I may have to get some 3600 MHz RAM at some point.

504 single is good.ram helps but not only tricks.you have to tweak bios settings like digi vrm and very clean windows.ram this helps:

3733 and 1866 fclk is combine but when you set 4000 and fclk not 2000 still 1866 magic is broken.4994-5005 not so much.don't play with LLC but tweak others and enable pbo not auto.

i will recruit people to here.some say hey it's dead place but 3 like and 2 reply in here very short time.in my hometown no one cares.now which one the dead place?

AMD Ryzen Kullanıcı & Tartışma Konusu: 668 Kullanıcı (Güncel)

kime demiştim ben yakında cine20'de stokta 5 bin yaparım diye?PBO değeri yok enable seçili.ram 10 puan da olsa etki ediyor 3733'e göre.3733'den sonra fclk ayarı bozuluyor tabi tam yarısı yapamıyorsunuz.atayım da şahit olun yeni biosla daha mı iyi yoksa daha mı kötü olacak diye?

forum.donanimhaber.com

 

[Roddey]

Changed the ram timings to dram calc. fast timing for b-die at 3600mhz. Rest of the settings is default.

 

[Voltaj .45 ACP]

Changed the ram timings to dram calc. fast timing for b-die at 3600mhz. Rest of the settings is default.
View attachment 131448

nice! you've done the magic right? 3600mhz/1800fclk?

 

[Roddey]

nice! you've done the magic right? 3600mhz/1800fclk?

yes