Making Audio Enhancers Work on Windows

[Jayce]

You did the LFX delete properly. Try redo the delete and then click refresh on top.
Which product did you use to enable DD encode? Dolby Home Theater V4? Dolby Digital Plus Home Theater?
Still this technique might reduce the delay by usually at most 10ms.

Would deleting the LFX properly also fix the delay when using Dolby Atmos for gaming with a soundbar HDMI?

 

[CityCultivator]

Would deleting the LFX properly also fix the delay when using Dolby Atmos for gaming with a soundbar HDMI?

Dolby Atmos for Gaming uses SFX, and all processing is done on that SFX. Disabling that SFX = Disabling Atmos for Gaming.
Any audio processing software will cause latency. You want minimum latency = remove any and all audio processing software.

 

[Jayce]

Dolby Atmos for Gaming uses SFX, and all processing is done on that SFX. Disabling that SFX = Disabling Atmos for Gaming.
Any audio processing software will cause latency. You want minimum latency = remove any and all audio processing software.

I don't think I have any processing software other than Dolby Atmos for gaming app.

 

[CityCultivator]

I don't think I have any processing software other than Dolby Atmos for gaming app.

Then your latency is as minimum as it can on the PC side. Check the soundbar if there is any audio enhancers enabled.

 

[Jayce]

Then your latency is as minimum as it can on the PC side. Check the soundbar if there is any audio enhancers enabled.

Is realtek audio console a processing software? I don't need it anymore since I use a soundbar.

My soundbar has Truvolume setting. Night mode off. Ecopower is on

 

[Zbrat]

You did the LFX delete properly. Try redo the delete and then click refresh on top.
Which product did you use to enable DD encode? Dolby Home Theater V4? Dolby Digital Plus Home Theater?
Still this technique might reduce the delay by usually at most 10ms.

Ok, my bad. I had to hit "Apply Effect and Processing Mode Configs".
Yes, it seems to be better now and the experience has improved. Not much, but made me happier. Every bit counts
I used Dolby Digital Plus Home Theater (HDMI/SPDIF). Any better product to improve the latency? (I have not installed any Audio Enhancer app, btw).

 

[CityCultivator]

Is realtek audio console a processing software? I don't need it anymore since I use a soundbar.

My soundbar has Truvolume setting. Night mode off. Ecopower is on

Truvolume WILL cause latency. realtek audio console is not audio processing.

 

[CityCultivator]

I have an issue applying modern APOs on my Sound Blaster Omni.
This is my stock APO on the SPDIF out endpoint.

[LFX]
{B97FC76B-7322-4bf0-A1E2-479E4DD2BC00}
[GFX]
{E7C0C8E7-65A8-492d-9DD1-97BF2022DAE1}
[UI]
[SFX]
[MFX]
[EFX]
[KDSFX]
[KDMFX]
[KDEFX]
[OSFX]
[OMFX]
[CompositeSFX]
[CompositeMFX]
[CompositeEFX]
[CompositeKDSFX]
[CompositeKDMFX]
[CompositeKDEFX]
[CompositeOSFX]
[CompositeOMFX]
[ProcessingLFX]
[ProcessingGFX]
[ProcessingSFx]
[ProcessingMFX]
[ProcessingEFX]
[ProcessingKDSFx]
[ProcessingKDMFX]
[ProcessingKDEFX]
[ProcessingOSFX]
[ProcessingOMFX]
[Notes]
Default Omni SPDIF

As I need Dolby Digital Live, I cannot replace the GFX. I can only replace the LFX section GUID with older APOs, locking me in using a single APO at a time.
Trying to put anything in SFX, MFX, EFX does not apply; no APO gets loaded; clearing LFX and GFX does not make any difference.
I would like to use APO such as Dolby Atmos, but I cannot apply those. Also I was previously could use composite APOs on Realtek, but cannot on the Omni.
Does anyone know how to allow usage of modern SFX, MFX, EFX on such devices?

 

[AAF Optimus]

I have an issue applying modern APOs on my Sound Blaster Omni.
This is my stock APO on the SPDIF out endpoint.

[LFX]
{B97FC76B-7322-4bf0-A1E2-479E4DD2BC00}
[GFX]
{E7C0C8E7-65A8-492d-9DD1-97BF2022DAE1}
[UI]
[SFX]
[MFX]
[EFX]
[KDSFX]
[KDMFX]
[KDEFX]
[OSFX]
[OMFX]
[CompositeSFX]
[CompositeMFX]
[CompositeEFX]
[CompositeKDSFX]
[CompositeKDMFX]
[CompositeKDEFX]
[CompositeOSFX]
[CompositeOMFX]
[ProcessingLFX]
[ProcessingGFX]
[ProcessingSFx]
[ProcessingMFX]
[ProcessingEFX]
[ProcessingKDSFx]
[ProcessingKDMFX]
[ProcessingKDEFX]
[ProcessingOSFX]
[ProcessingOMFX]
[Notes]
Default Omni SPDIF

As I need Dolby Digital Live, I cannot replace the GFX. I can only replace the LFX section GUID with older APOs, locking me in using a single APO at a time.
Trying to put anything in SFX, MFX, EFX does not apply; no APO gets loaded; clearing LFX and GFX does not make any difference.
I would like to use APO such as Dolby Atmos, but I cannot apply those. Also I was previously could use composite APOs on Realtek, but cannot on the Omni.
Does anyone know how to allow usage of modern SFX, MFX, EFX on such devices?

In the original driver package of this model, only GFX and LFX are used in INF, but in Creative's APO (Post-Processing Library) SFX, MFX and EFX values are also present.

 

[CityCultivator]

In the original driver package of this model, only GFX and LFX are used in INF, but in Creative's APO (Post-Processing Library) SFX, MFX and EFX values are also present.

It appears that the driver itself is limited.
I did a few tests with stock Windows drivers, different APOs are applied, but SFX, MFX and EFX values do not work, thus appearing that the limitation is on the driver itself.
Still, I was able to apply Dolby Atmos APO. I kept the Creative GFX, so that Dolby Digital Live support remain, and moved contents of Dolby Atmos from SFX to LFX.
Creative audio effects are performed on the GFX, compared to Dolby APOs, where audio processing is done in LFX/SFX level. Thus now I have both Dolby Atmos APO effects along with Creative effects working together. That is the most I can do.
Still, I miss using composite SFX, where I was able to mix Dolby and SRS.

 

[AAF Optimus]

It appears that the driver itself is limited.
I did a few tests with stock Windows drivers, different APOs are applied, but SFX, MFX and EFX values do not work, thus appearing that the limitation is on the driver itself.
Still, I was able to apply Dolby Atmos APO. I kept the Creative GFX, so that Dolby Digital Live support remain, and moved contents of Dolby Atmos from SFX to LFX.
Creative audio effects are performed on the GFX, compared to Dolby APOs, where audio processing is done in LFX/SFX level. Thus now I have both Dolby Atmos APO effects along with Creative effects working together. That is the most I can do.
Still, I miss using composite SFX, where I was able to mix Dolby and SRS.

Too bad I don't have any equivalent hardware at hand. If not, I could modify the driver, include SFX, MFX and EFX Composite values and test on a reinstall.

 

[hyperboarean]

Anybody ever seen Super X-Fi mod? I think it's the best option for 3D headphone surround.

 

[nikownzyu]

hi, im fairly new to apo, i have everything working but i dont want my audio enhancements to apply to my realtek digital output. i only want it applied to my speakers output. Essentially how do i apply product settings to one single endpoint?

 

[CityCultivator]

hi, im fairly new to apo, i have everything working but i dont want my audio enhancements to apply to my realtek digital output. i only want it applied to my speakers output. Essentially how do i apply product settings to one single endpoint?

You select the speaker endpoint then you use product config tool.

 

[nikownzyu]

I do that but it seems to to think my speakers and realtek output are the same thing whenever i apply it to just one of them it does both of them

 

[CityCultivator]

I do that but it seems to to think my speakers and realtek output are the same thing whenever i apply it to just one of them it does both of them

OK. That's strange. Post a screenshot of FX Configurator.

 

[n3roxe]

I've been using Apo driver for a long time with dts connect and asus xonar u7 for 5.1 sound, works great.
But it's unclear to me, can I use any other enhancements along with it? I would like to use equalizer APO for room correction, or really any form or eq.
But as soon as I install eq apo and restart pc, dts interactive from my soundcard formats is lost.
I tried to install as SFX/EFX but its the same. Can someone help?

 

[erpguy53]

Dolby SWC component driver v3.20602.651.0 from MS Update:

Microsoft Update Catalog

www.catalog.update.microsoft.com

maybe alanfox2000 can update the Dolby DAX API Service to at least v3.20602.651.0 in the next release of his APO driver pack

 

[H4cziLLa]

Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

Last driver DCH DRIVER VERSION UPDATED 6.0.8975.1 win10 1903 Gygabyte B450M DS3H Realtek® ALC887 codec all install and work fine, but i dont have realtek audio console or Realtek HD Audio Manager so i cant change my speaker settings !, i rollback to old driver, please fix, I appreciate your...

www.techpowerup.com

 

[alanfox2000]

APO Driver 2.7.5 allow installing DTS/Dolby Apps directly from MS Store.

 

[whitelightning]

hello @alanfox2000

In the installer of APO Driver 2.75 there is a entry called "DTS APO4.x for UWP (unworkable)". What do you mean with this ?! It doesnt work yet ?

regards,

ps. Thanks for your awesome work!

 

[slayer23]

Hey people, i recently went back to Windows 10 LTSC (1809) and as soon as i apply APO effects (in this case Nvidia HMDI audio Dolby Digital Plus) the volume on the HDMI audio device always resets to 100% after reboot (it doesn't remember volume level prior to reboot), this issue was not present on windows 1909 onwards, disabling exclusive control did not make any difference. Btw i'm using the latest APO.
Any clue on how to fix this ?

 

[baribal]

APO Driver 2.7.5 allow installing DTS/Dolby Apps directly from MS Store.

Hi Alanfox2000,

Could you please tell what is the new service requirement DolbyLabs.DolbyFusionService_rz1tebttyb220 for the updated DolbyLaboratories.DolbyAtmosSpeakerSystem_3.20700.702.0_x64__rz1tebttyb220.appx? I couldn't find it. Many thx in advance.

 

[2ji8888]

Guys,

I need help, before upgrading my windows to the latest, version 2004. Dolby is working fine, but now, it seems the service keeps on stopping on its own

can anybody help me?

This is what i get from eventviewer

Faulting application name: DAX3API.exe, version: 3.20602.651.0, time stamp: 0x5ec3abc0
Faulting module name: DAX3API.exe, version: 3.20602.651.0, time stamp: 0x5ec3abc0
Exception code: 0xc0000005
Fault offset: 0x0000000000065ba4
Faulting process id: 0x2340
Faulting application start time: 0x01d6624072a9862a
Faulting application path: C:\WINDOWS\system32\dolbyaposvc\DAX3API.exe
Faulting module path: C:\WINDOWS\system32\dolbyaposvc\DAX3API.exe
Report Id: 619cf50c-4253-451f-91bd-ea1c75abf7b8
Faulting package full name:
Faulting package-relative application ID:

Thanks.

 

[clawhamer]

Hi guys! I have ALC892 Mobo from asrock. Windows 1909.
My main issue is that Speaker fill not working however option exists.
Currently using 2.81 driver from realtek with working realtek control panel.
One guy said Speaker fill will work only with Microsoft 10.0.15063.502 от 27.07.2017 driver version but its unable to find in internet now((
Here is his post Speaker fill not working on WIN 10

Please advice me best modded driver i can use with my chip.