- Joined
- Jun 30, 2011
- Messages
- 42 (0.01/day)
I will list my rig and the steps I have taken so far and what the problem is.........
Asus Tuf Gaming X570 Plus wifi. 3700X CPU. Gskill Ripjaws V 3600mhz cl 16-19-19-39 @1.35v. Decent enough GTX 1060 3GB MSI card. I don't game much. 600 W PSU, brand new. EVEGA or whatever that brand is.
(I'm aware 600 is on the line of being "too low" - but it's not below the line IMHO) (I got a 750W I should have dropped in there, long story)
I wanted to tighten my timings. I downloaded Ryzen Master, Typhoon, and Dram Calc. Installed RM and set up a "base hardware" profile in the bios. RM matches those settings on the "Home" tab in RM. (That's good)
So I open Typhoon, tell it to "read" from one of my memory sticks. It does. I then click on report / scroll all the way to the bottom and expand the super secret menu........then I export that whole thing to an Html file. My sticks XMP file, essentially.
Then I load Dram Calc. I import that Html file and it reads everything correctly. * I HAVE MADE SURE DOZENS OF TIMES * that ALL the settings match up and are as they should be.........Example: I'm running X570 board. I know B550 is NOT selected. It's all correct........
Great! So I slowly start adjusting my timings downwards to try to match Dram Calc "Safe" speeds and I try a few at a time and then Apply and Test in Ryzen Master. I have gotten almost Every setting to match perfectly but Dram Calc says I ought to be able to run CL 14 and when I try to apply THAT setting in RM, and test it.........PC won't boot. Have to CLR Cmos.
Why can I almost every other # to match what DRAM Calc should be "Safe" except for CL? When I change that from 16 to 14 ---as the Calc suggests....... It's no good. Won't boot. What can I try?
Asus Tuf Gaming X570 Plus wifi. 3700X CPU. Gskill Ripjaws V 3600mhz cl 16-19-19-39 @1.35v. Decent enough GTX 1060 3GB MSI card. I don't game much. 600 W PSU, brand new. EVEGA or whatever that brand is.
(I'm aware 600 is on the line of being "too low" - but it's not below the line IMHO) (I got a 750W I should have dropped in there, long story)
I wanted to tighten my timings. I downloaded Ryzen Master, Typhoon, and Dram Calc. Installed RM and set up a "base hardware" profile in the bios. RM matches those settings on the "Home" tab in RM. (That's good)
So I open Typhoon, tell it to "read" from one of my memory sticks. It does. I then click on report / scroll all the way to the bottom and expand the super secret menu........then I export that whole thing to an Html file. My sticks XMP file, essentially.
Then I load Dram Calc. I import that Html file and it reads everything correctly. * I HAVE MADE SURE DOZENS OF TIMES * that ALL the settings match up and are as they should be.........Example: I'm running X570 board. I know B550 is NOT selected. It's all correct........
Great! So I slowly start adjusting my timings downwards to try to match Dram Calc "Safe" speeds and I try a few at a time and then Apply and Test in Ryzen Master. I have gotten almost Every setting to match perfectly but Dram Calc says I ought to be able to run CL 14 and when I try to apply THAT setting in RM, and test it.........PC won't boot. Have to CLR Cmos.
Why can I almost every other # to match what DRAM Calc should be "Safe" except for CL? When I change that from 16 to 14 ---as the Calc suggests....... It's no good. Won't boot. What can I try?