Corsair Vengeance LPX 3600-CL18 OC for Ryzen 5 3600

[karkass]

Please tell me what you used for vddp/vddg, ram voltage. Things that could make 4 sticks misbehave.
In the screenshot is what I've used. Things went to shit badly when putting the recommended values which were different from mine. What RTTs should I use - 7/3/1, 7/3/5? Cad bus strength 43, 48?

 

[mxking035]

Please tell me what you used for vddp/vddg, ram voltage. Things that could make 4 sticks misbehave.
In the screenshot is what I've used. Things went to shit badly when putting the recommended values which were different from mine. What RTTs should I use - 7/3/1, 7/3/5? Cad bus strength 43, 48?

for 3600 MT/s is vddp=0.900 and vddg=0.950
RTT: 7/3/5
procODT=43.6, but lower is better same as vSOC. maybe can work with 36.9/40
Cadbuss: 24-20-24-24/24-20-20-24

use DRAM=1.37v

EDIT: if does not work otherwise vddp=.95 vddg=1.00v soc=1.05v

 

[karkass]

I have default soc - 1.1. Is this ok? Should I lower it to 1.05? vSOC is the same thing?

 

[mxking035]

I have default soc - 1.1. Is this ok? Should I lower it to 1.05? vSOC is the same thing?

Soc=1.05v is better, its only loose timings. Yes same thing.

 

[karkass]

I've tried your settings to the last, but I got a plethora of bsods, irql less or not equal, pfn list and others. And it seems that memory training fails after cold boot. What do you suspect it might be the cause? I am getting sick of it .

 

[mxking035]

I've tried your settings to the last, but I got a plethora of bsods, irql less or not equal, pfn list and others. And it seems that memory training fails after cold boot. What do you suspect it might be the cause? I am getting sick of it .

Did you overclock your CPU? Maybe your CPU voltage is too low.
I'm resetting CMOS everytime I encounter training problem and I'm saving all my OC profile.

Can you let your Ram vsoc, vddg, vddp, tRC and tRFC in AUTO and see.
Did you try all ram voltage from 1.37-1.4?

Sorry I'm not too experience, but hope somebody jump in and advice.

EDIT: What is your XMP dram voltage?

 

[karkass]

I don't have no form of CPU overclock. SOC and vSOC are both on normal(not auto). I tried with ram voltages up to 1.4.
God this is dreadful. Why can't things be intel level of simplicity when it comes to ram ?

 

[mxking035]

I don't have no form of CPU overclock. SOC and vSOC are both on normal(not auto). I tried with ram voltages up to 1.4.
God this is dreadful. Why can't things be intel level of simplicity when it comes to ram ?

I'm having also same as your problem to run 4 sticks.
I remember that first time my problem is selecting Command Rate to 1T, so I let it Auto and went well, still it will come to 1T.

Are you selecting Command Rate 1T? Let it Auto. Don't manually select to 1T.

EDIT: My first overclock change is Cmd2T=Auto and 16-21-21-42 @ 1.38v.

 

[examen1996]

I see the fun here never stopped had a delightful time getting up to speed with the effort you put here @mxking035 .
Really curios about what setting you will keep in the end .

 

[mxking035]

I see the fun here never stopped had a delightful time getting up to speed with the effort you put here @mxking035 .
Really curios about what setting you will keep in the end .

This is my last setting:

But I changed plan and go for 64gb, I sold my 4 sticks and bought G.Skill 2x16gb Hynix DJR in the same price. Still saving for next set of 2x16gb.

Pretty decent for the price.

G.SKILL Ripjaws V Series 32GB DDR4 3600 RAM Memory - Newegg.com

Buy G.SKILL Ripjaws V Series 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3600 (PC4 28800) Desktop Memory Model F4-3600C16D-32GVKC with fast shipping and top-rated customer service. Once you know, you Newegg!

www.newegg.com

Using 3733mhz ram=1.37v, SOC=1.05v, procODT=36.9. And can stable GDM off easily buy just adding tRP +1.

 

[examen1996]

This is my last setting:
View attachment 170467

But I changed plan and go for 64gb, I sold my 4 sticks and bought G.Skill 2x16gb Hynix DJR in the same price. Still saving for next set of 2x16gb.

Pretty decent for the price.

G.SKILL Ripjaws V Series 32GB DDR4 3600 RAM Memory - Newegg.com

Buy G.SKILL Ripjaws V Series 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3600 (PC4 28800) Desktop Memory Model F4-3600C16D-32GVKC with fast shipping and top-rated customer service. Once you know, you Newegg!

www.newegg.com

Using 3733mhz ram=1.37v, SOC=1.05v, procODT=36.9. And can stable GDM off easily buy just adding tRP +1.
View attachment 170468
View attachment 170469

Damn , even better )
Nice !

 

[mxking035]

Damn , even better )
Nice !

This is GDM Off I'm using when gaming.

It's good upgrade, if you plan for LPX 4x8gb better this ram 2x16gb with same price.

 

[examen1996]

This is GDM Off I'm using when gaming.
View attachment 170481

It's good upgrade, if you plan for LPX 4x8gb better this ram 2x16gb with same price.

Curreny Indont think there will be any updates in ram as I am tempted to get one a decent gpu (tried a 5700 non xt hated the drivers got back on the rx 580) but if i will upgrade in the future , i know who to ask

 

[karkass]

@examen1996 , could you please help me fix my cold boot issues? I can't understand how my ram oc is stable, but memory training always fails after coldboot.

 

[examen1996]

@examen1996 , could you please help me fix my cold boot issues? I can't understand how my ram oc is stable, but memory training always fails after coldboot.

What setup do you have and what settings are you using for your ram

 

[karkass]

Please tell me what you used for vddp/vddg, ram voltage. Things that could make 4 sticks misbehave.
In the screenshot is what I've used. Things went to shit badly when putting the recommended values which were different from mine. What RTTs should I use - 7/3/1, 7/3/5? Cad bus strength 43, 48?

This settings, 1.38 ram voltage. I have aorus x570 on latest bios. Please also note that I have two kits of 2x8 lpx 18-22-22-22-42 (32 gb total).

 

[examen1996]

I suspect you may have 2 sets of 2 diffrent revisions, that can be easily confirmed by using typhoon burner and exporting the ram info for the 4 sticks. Otherwise from a first glance the only settings I would change is the ttrdl and trrds so that they match what was recommended by the calculator. Also, make sure you dont use all the values provided by the calculator, set all the values that i included in the green, and those with red are to be left alone , trfc should work at 570. Also, micron e die can get unstable at unnecesairly high voltage, i always run mine at 1.37 , 4 sticks should be trickyker but the voltage should be the same. Keep me updated

 

[mxking035]

This settings, 1.38 ram voltage. I have aorus x570 on latest bios. Please also note that I have two kits of 2x8 lpx 18-22-22-22-42 (32 gb total).

Which chipset driver you are using? from Mobo or AMD?.
Try to update your chipset driver from AMD website.

As Fry178 mention in earlier post, GB x570 is a bit....
Some post said Enabling "Power loading" in bios solved their cold boot issues.
Some said updating chipset driver from AMD Wesbite solved as well.

 

[karkass]

I suspect you may have 2 sets of 2 diffrent revisions, that can be easily confirmed by using typhoon burner and exporting the ram info for the 4 sticks. Otherwise from a first glance the only settings I would change is the ttrdl and trrds so that they match what was recommended by the calculator. Also, make sure you dont use all the values provided by the calculator, set all the values that i included in the green, and those with red are to be left alone , trfc should work at 570. Also, micron e die can get unstable at unnecesairly high voltage, i always run mine at 1.37 , 4 sticks should be trickyker but the voltage should be the same. Keep me updated

View attachment 171454

No luck. Same old training failure at cold boot.

Which chipset driver you are using? from Mobo or AMD?.
Try to update your chipset driver from AMD website.

As Fry178 mention in earlier post, GB x570 is a bit....
Some post said Enabling "Power loading" in bios solved their cold boot issues.
Some said updating chipset driver from AMD Wesbite solved as well.

What difference would the chipset drivers make as I have training issues at post? AMD ones for the record... As for the power loading setting, no difference with or w/o it...