Your PC ATM

[Space Lynx]

Opposite ends of the spectrum, but equally SFF.

• Cerberus: 18.7L, 2mm powdercoated alu
• Lone L5: 4.6L, 1.5mm powdercoated alu

I really like the beautiful clean look. Well done! Be careful with the diabetes in a can though! I haven't had a soda in 5+ years, after I was diagnosed with diabetes I gave up soda and lost weight. My diabetes has not come back ever since I switched to water. Soda scares me. lol

 

[freeagent]

New fans!

 

[tabascosauz]

I really like the beautiful clean look. Well done! Be careful with the diabetes in a can though! I haven't had a soda in 5+ years, after I was diagnosed with diabetes I gave up soda and lost weight. My diabetes has not come back ever since I switched to water. Soda scares me. lol

Don't worry, soda scares me too

I specifically bought a pack of 350mm cans not as a beverage (don't usually ever buy soft drinks), but as a standard SFF photo prop. Last time with the HT5 the 2% milk was a quirky idea, but it didn't really provide a universally comprehensible sense of scale. We have a heat wave going on right now and it's been 40+ daily since Friday so the drinks are nice, but nothing can replace the soothing sensation of ice cold water.

@freeagent did the cooler come with a second set of 140mm clips? Seems like a second A14 would fit better, cool better and be quieter as well.

 

[freeagent]

Your little builds are so sweet man, so much power in a little package, it really is impressive!

I did consider 2x 140s, but I didn't want a huge chunk of the fan hanging over the top, I also wanted to keep its stock big n little setup, it works very well. It did come with 2 sets, the one holding the 140 is stretched right out as far as I can get it. Not looking forward to its removal.. probably have to use something to pry gently.. or firmly It is made for the 140 with 120 spacing.. slight oversight on my part

 

[MIRTAZAPINE]

Opposite ends of the spectrum, but equally SFF.

• Cerberus: 18.7L, 2mm powdercoated alu
• Lone L5: 4.6L, 1.5mm powdercoated alu

They are both matching white colour with almost the same shade! I thought the Lone L5 would looked be alot smaller being 4 times less volume. I see that you like conventional layout small form factor meaning no riser cables. That is good as riser cables for pcie gen 4 is a hit or miss now. I wish Nvidia release the RTX 3050 LP! Hopefully next year... the 3000 series gpu are not small itx friendly.

Edit : Don't worry too much of the soda if you kept your other carb related intake from food and drinks lower. Hydrohomies water is always the best but I am too used to flavoured water so I used unsweetened green tea. Talking about soda and sugar my molars are kinda wreck all these years , bright side is that they can filled still but avoid smiling so wide.

 

[Count Shagula]

So this is my new system to take over from X58. More info can be found here in the link including info about spec and hardware used for the build, untIl i get profil spec updated: Tomgang´s project 2 systems in 1 case. All air cooled. | TechPowerUp Forums

The little monitor is for tempoary use, i am planing to get a better one down the line, but right now my econemy needs to recover from this build. I has not been cheap. Also the image are garbage, my phone is utter crap. It looks much better in person.

Fkn excellent speakers though

 

[Tomgang]

Fkn excellent speakers though

They are good, but not as good as the Logitech Z-5500 I have connected to my TV. But no complaints at all.

 

[Ralfi]

It’s almost done!…

I have one more Arctic Bionix P120 ARGB fan on the way & waiting for stock of sleeved PSU cables…

 

[xtreemchaos]

i remember the days without RBG thay was dark and horrid . great looking setup bud. well done

 

[ThrashZone]

Opposite ends of the spectrum, but equally SFF.

• Cerberus: 18.7L, 2mm powdercoated alu
• Lone L5: 4.6L, 1.5mm powdercoated alu

Hi,
Nice looked up that little case man that thing is pricey lol

 

[Ralfi]

i remember the days without RBG thay was dark and horrid . great looking setup bud. well done

Thanks man! I didn’t want to over do it. Just a subtle shade of ambiance

 

[tabascosauz]

Hi,
Nice looked up that little case man that thing is pricey lol

Made in Canada tho in the next province over - if Lone ran the batch of 15 just two weeks later I could've had my case arrive on Canada day a 12 hour drive or so I think

It's nigh impossible to find in-between cases like the L5 so I'm okay with the price. Taobao is SFF paradise but China only seems to care about cases as small as humanly possible lol. Everything on Taobao is either too small (pitiful cooler clearance), pointless (sandwich with pitiful cooler clearance), or too big (full size GPU). I don't want space wasted on GPUs because I love my APUs, but I also need the 2x80s and 70mm clearance because I love pushing my APUs to the limit. B-die fussy lol

But even when I'm not buying Chinese I still gotta pay China tax had to buy some low profile PCIe blank plates to fill the slots

 

[ThrashZone]

Hi,
Finally got my x99 rig back going Thursday night, thank goodness poor q9550 was doing okay but that's about all lol
Added another rad gtx240 I had left over and 2011/2066 ek magnitude black acetal and added 2-ml240 & ml140 2 pack pairs for each rad.
Media center is now the way it was supposed to be when I started it a year ago lol arty:

 

[RJARRRPCGP]

i remember the days without RBG thay was dark and horrid . great looking setup bud. well done

Back in the '00s, in late-2003 and 2004, I had the apparently symbolic-of-the-era blue-LED fans. (especially of that decade)

 

[Ralfi]

Back in the '00s, in late-2003 and 2004, I had the apparently symbolic-of-the-era blue-LED fans. (especially of that decade)

Before changing my case (to the above pictured one), my old case from about 10 years back had a blue LED front fan. I forgot about it until a few months ago. Case even had a dedicated button to turn it on - must’ve been the first ever case to have it

 

[xtreemchaos]

Back in the '00s, in late-2003 and 2004

i had gas lights in mine in the late 70s, on my abacus bud .

 

[witkazy]

Weirdly enough my latest build is doing so fine i'm reluctant to use it ,just does'nt seems fair toward other pc's i own

 

[SN2716057]

Updated the VR&HTPC so the 1080 would be better cooled.

I mounted the Raijintek Morpheus II along with two Noctua NF-A12x15's, I kept the memory cooling and the back plate.

Not totally sold on this case (NR200). CM should've opted for a normal top panel, similar to the bottom one. It's a
fckng crime to install fans on top, never mind a radiator.

 

[ThrashZone]

Updated the VR&HTPC so the 1080 would be better cooled.

I mounted the Raijintek Morpheus II along with two Noctua NF-A12x15's, I kept the memory cooling and the back plate.

Not totally sold on this case (NR200). CM should've opted for a normal top panel, similar to the bottom one. It's a
fckng crime to install fans on top, never mind a radiator.

Hi,
Nice case thought I finally found a small atx case to use but dang not compatible with atx psu's

 

[tabascosauz]

Front I/O? What's that?

I wonder when my low profile PCIe brackets will finally emerge from the customs black hole.

 

[SN2716057]

Big switch. From the Cooler Master NR200 back to the Case Labs Mercury S3. Cooling FTW!

Located behind the 55" monitor. Dual Noctua NF-A12x25 FLX front intake fans set at 6 Volts.

Spoiler: Biggest downside of this case..

No cable management whatsoever, so zip-ties everywhere

 

[Secret Rival]

Still needs work, but the tubing is much better than last time. Finally got a GPU block on this thing.

Waiting on a few fittings and then I'll try to clean it up some.
I use the motherboard light and the non Thermaltake lighting for music sync, works pretty good for that. The T.T. lighting I just mess around with, looking for something funky. A little 4th of July nod in the bottom picture. Hope you all had a good holiday.

 

[tabascosauz]

Big switch. From the Cooler Master NR200 back to the Case Labs Mercury S3. Cooling FTW!

Located behind the 55" monitor. Dual Noctua NF-A12x25 FLX front intake fans set at 6 Volts.

The S3 and S5 will always have a special place in my heart. Absolutely love everything about them.

My Cerberus is the same way with cable management. If you can't hide it, then make it look nice - that whole setup is begging for a nice sleeved kit and the case is so good for showing it all off!

 

[Secret Rival]

The S3 and S5 will always have a special place in my heart. Absolutely love everything about them.

My Cerberus is the same way with cable management. If you can't hide it, then make it look nice - that whole setup is begging for a nice sleeved kit and the case is so good for showing it all off!

That cable job looks pretty good to me!

I've got lots of work to do in that area to get almost up to snuff

Great work!

 

[Ralfi]

The S3 and S5 will always have a special place in my heart. Absolutely love everything about them.

My Cerberus is the same way with cable management. If you can't hide it, then make it look nice - that whole setup is begging for a nice sleeved kit and the case is so good for showing it all off!

Those cables look like nice, flowing hair. Good job.

I’ve got some sleeved cables coming this week hopefully, so now I’ve got to match your efforts heh.