Hi, I'm facing an issue with installing Quadro View on my Laptop which has a Quadro P2000: I chose "best driver" option (466.11-notebook-win10-64bit-international-dch-whql) and checked all components above/except the GeForce Experience Components, including Quadro View. I then continued through NVCleanstall and disabled both installer and driver telemetry, and enabled MSI. However, after the actual NVIDIA installer is finished, Quadro View is not available and cannot be started on my system. When chosing custom installation in the NVIDIA installer, it also does not show Quadro View as selectable component.
-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
Quadro View not available/installed despite being selected (NVCleanstall 1.9.0)
- Thread starter BenJW
- Start date
- Joined
- May 14, 2004
- Messages
- 28,155 (3.72/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
When you install the driver normally, without NVCleanstall, do you get a working Quadro View installation?
- Joined
- Aug 22, 2010
- Messages
- 770 (0.15/day)
- Location
- Germany
| System Name | Acer Nitro 5 (AN515-45-R715) |
|---|---|
| Processor | AMD Ryzen 9 5900HX |
| Motherboard | AMD Promontory / Bixby FCH |
| Cooling | Acer Nitro Sense |
| Memory | 32 GB |
| Video Card(s) | AMD Radeon Graphics (Cezanne) / NVIDIA RTX 3080 Laptop GPU |
| Storage | WDC PC SN530 SDBPNPZ |
| Display(s) | BOE CQ NE156QHM-NY3 |
| Software | Windows 11 beta channel |
Looks like NVCleanstall does not copy the folder Display.Nview
So I guess the installer for Quadro cards in laptops should actually be "466.11-quadro-rtx-desktop-notebook-win10-64bit-international-dch-whql". If I run that directly and go for custom setup, I get the option "RTX Desktop Manager", which is the new name for Quadro View. If I use NVCleanstall and "Use driver files on disk" with the same installer, the installer will not show the "RTX Desktop Manager" as available option, despite checking "Quadro View" in NVCleanstall.
- Joined
- May 14, 2004
- Messages
- 28,155 (3.72/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
Haven't had time to look into this, sorry
- Joined
- Aug 22, 2010
- Messages
- 770 (0.15/day)
- Location
- Germany
| System Name | Acer Nitro 5 (AN515-45-R715) |
|---|---|
| Processor | AMD Ryzen 9 5900HX |
| Motherboard | AMD Promontory / Bixby FCH |
| Cooling | Acer Nitro Sense |
| Memory | 32 GB |
| Video Card(s) | AMD Radeon Graphics (Cezanne) / NVIDIA RTX 3080 Laptop GPU |
| Storage | WDC PC SN530 SDBPNPZ |
| Display(s) | BOE CQ NE156QHM-NY3 |
| Software | Windows 11 beta channel |
Looks like the same issue as reported here: https://www.techpowerup.com/forums/threads/nvcleanstall-vs-lenovo-oem-driver.285056/
In this case the folder Display.Nview is missing.
Test build 1.10.2 creates this folder.
In this case the folder Display.Nview is missing.
Test build 1.10.2 creates this folder.
- Joined
- May 14, 2004
- Messages
- 28,155 (3.72/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
@Methanoid can you check if this test build solves the problem?
- Joined
- May 14, 2004
- Messages
- 28,155 (3.72/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
NVCleanstall vs. Lenovo OEM driver
Tried to install Lenovo 466.84 (on Asus laptop) For some reason NVCleanstall (any version) forgets to copy setup.exe and nvsetup.exe If you copy these files manually before hitting next button, installation works fine.
www.techpowerup.com
The file icon in this postNVCleanstall vs. Lenovo OEM driver
Tried to install Lenovo 466.84 (on Asus laptop) For some reason NVCleanstall (any version) forgets to copy setup.exe and nvsetup.exe If you copy these files manually before hitting next button, installation works fine.
Thanks, that fixed the issue for me... I was able to build the final EXE driver with the various tweaks selected
