- Joined
- Jun 22, 2012
- Messages
- 314 (0.07/day)
Processor | Intel i7-12700K |
---|---|
Motherboard | MSI PRO Z690-A WIFI |
Cooling | Noctua NH-D15S |
Memory | Corsair Vengeance 4x16 GB (64GB) DDR4-3600 C18 |
Video Card(s) | MSI GeForce RTX 3090 GAMING X TRIO 24G |
Storage | Samsung 980 Pro 1TB, SK hynix Platinum P41 2TB |
Case | Fractal Define C |
Power Supply | Corsair RM850x |
Mouse | Logitech G203 |
Software | openSUSE Tumbleweed |
Interesting. A bit better on randoms, good. How did you convert it? If under linux, could it be done on a live image like Parted Magic, since I don’t have (and don’t need) a linux install on another drive?
I did it as shown in the link below, from a separate SSD:
Switching your NVME ssd to 4k - Bjonnh.net
I recently got a WD SN850. There is a little trick to do when you receive it to switch it to 4k LBA and thus getting better performance by using native block size.
www.bjonnh.net
This method is universal for all NVMe SSDs that support changing the logical sector size (i.e. you will not need to look for vendor-specific tools to change it). You could probably do it also from a live Linux distribution, but you will likely need to install nvme-cli tools first (e.g. from Ubuntu that would be accomplished with "apt-get install nvme-cli").
But again, this performance difference that I personally observed could be just due to Windows 11 having performance issues with NVMe SSDs under certain configurations. It needs to be tested in a more controlled environment using Windows 10 or Linux. It might also be that some models will show larger differences than others.