• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Thermal Grizzly Announces Contact Frame For Intel Alder Lake, Promises to Reduce Temperatures by up to 10º

Mussels

Freshwater Moderator
Joined
Oct 6, 2004
Messages
58,413 (7.91/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Board flexing does occur still. I did it on my Sig Rig, when I saw it before I put the mobo in the case I reduced tension to where the mobo no longer bowed. Bowing can cause ram detection issues, potential trace damage, smd damage, overheating even.
And this isn't technically a new issue either, we've been dealing with RAM Slots not detecting for *decades* with over tightened CPU Coolers bending sockets and such
In this case, it's just happening to a greater extreme and more often than before

We'll see this on AM5 now too, just probably to a lesser extent - it's a weakness to the LGA platform and it seems the bigger the socket, the greater the risk of wibbly wobbly bendy breaky
 
Joined
Jul 30, 2014
Messages
131 (0.03/day)
Processor 5900x
Motherboard Crosshair 8 Impact
Cooling Air
Memory Hynix C-Die 3200MHz @CL14
Video Card(s) 3080 FTW3 Ultra
Storage Lots
Display(s) Many
Case Something that protects my innards
Power Supply Seasonic 850FX gen2
Enthusiasts have likely spent more in cooling upgrades that delivered a lesser final operating temperature result.

Indeed, 10+°C is an insane upgrade worth a few percent in the final overclock of a chip likely. But three times the cost of a very similar competition is simply incomprehendable. Thermalright LGA1700-BCF stated in the article is 1/3rd of the price of the TG one. Again, injustifiable price difference IMHO, for such a low effort part at that.
 
Joined
Jan 5, 2006
Messages
18,584 (2.68/day)
System Name AlderLake
Processor Intel i7 12700K P-Cores @ 5Ghz
Motherboard Gigabyte Z690 Aorus Master
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MT/s CL36
Video Card(s) MSI RTX 2070 Super Gaming X Trio
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p
Case Be quiet! Silent Base 600 - Window
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W
Mouse Logitech MX Anywhere 2 Laser wireless
Keyboard RAPOO E9270P Black 5GHz wireless
Software Windows 11
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock
Well got my new Z690 build running today , my i7 12700K is barely touching 60C load sofar, so no issues here.:D:D

Edit: Cinebench R23, 71C max load.
 
Last edited:
Joined
Jan 15, 2021
Messages
337 (0.23/day)
Board flexing does occur still. I did it on my Sig Rig, when I saw it before I put the mobo in the case I reduced tension to where the mobo no longer bowed. Bowing can cause ram detection issues, potential trace damage, smd damage, overheating even.
If the mobo is bending you clearly have bad components and or bad mounting.
 
Joined
Jan 5, 2006
Messages
18,584 (2.68/day)
System Name AlderLake
Processor Intel i7 12700K P-Cores @ 5Ghz
Motherboard Gigabyte Z690 Aorus Master
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MT/s CL36
Video Card(s) MSI RTX 2070 Super Gaming X Trio
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p
Case Be quiet! Silent Base 600 - Window
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W
Mouse Logitech MX Anywhere 2 Laser wireless
Keyboard RAPOO E9270P Black 5GHz wireless
Software Windows 11
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock
@stimpy88 71 degrees C max load after 10 minutes cinebench R23 isn't bad at all in my opinion, it's not that I run cinebench all day long.
For regular gaming, even cpu intensive the cpu temp stays below 50c sofar ivé seen, I'm happy with it, my motherboard is very sturdy because the Aorus Master has a backplate.
 
D

Deleted member 24505

Guest
@stimpy88 71 degrees C max load after 10 minutes cinebench R23 isn't bad at all in my opinion, it's not that I run cinebench all day long.
For regular gaming, even cpu intensive the cpu temp stays below 50c sofar ivé seen, I'm happy with it, my motherboard is very sturdy because the Aorus Master has a backplate.
Mine. 12700k stock, 1080ti 2114mhz, temps are fine
Untitled.jpg
 
Joined
Jan 5, 2006
Messages
18,584 (2.68/day)
System Name AlderLake
Processor Intel i7 12700K P-Cores @ 5Ghz
Motherboard Gigabyte Z690 Aorus Master
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MT/s CL36
Video Card(s) MSI RTX 2070 Super Gaming X Trio
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p
Case Be quiet! Silent Base 600 - Window
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W
Mouse Logitech MX Anywhere 2 Laser wireless
Keyboard RAPOO E9270P Black 5GHz wireless
Software Windows 11
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock
Last edited:
Joined
Apr 19, 2018
Messages
1,227 (0.50/day)
Processor AMD Ryzen 9 5950X
Motherboard Asus ROG Crosshair VIII Hero WiFi
Cooling Arctic Liquid Freezer II 420
Memory 32Gb G-Skill Trident Z Neo @3806MHz C14
Video Card(s) MSI GeForce RTX2070
Storage Seagate FireCuda 530 1TB
Display(s) Samsung G9 49" Curved Ultrawide
Case Cooler Master Cosmos
Audio Device(s) O2 USB Headphone AMP
Power Supply Corsair HX850i
Mouse Logitech G502
Keyboard Cherry MX
Software Windows 11
Your cpu seems to run somewhat hotter then mine in Cinebench R23, yours went up to 85 degrees


my cinebench run: maximum 71 degrees
View attachment 249586
I was more thinking about the performance. 71c is not too bad at all, very respectable during the benchmark. What cooling do you use? I get about 30400+- with my 5950x, my temps are about the same as yours, but I have one core that reaches 73c, the rest in the mid to higher 60s. I can push it to score just over 31000, but that's pushing temps into the low 80's (die temps), and that's not nice for the room temperature!

But congrats on the new build! There is nothing better than a fresh new build to play and tinker with!
 
Last edited:
Joined
Jan 5, 2006
Messages
18,584 (2.68/day)
System Name AlderLake
Processor Intel i7 12700K P-Cores @ 5Ghz
Motherboard Gigabyte Z690 Aorus Master
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MT/s CL36
Video Card(s) MSI RTX 2070 Super Gaming X Trio
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p
Case Be quiet! Silent Base 600 - Window
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W
Mouse Logitech MX Anywhere 2 Laser wireless
Keyboard RAPOO E9270P Black 5GHz wireless
Software Windows 11
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock
Joined
Jan 5, 2006
Messages
18,584 (2.68/day)
System Name AlderLake
Processor Intel i7 12700K P-Cores @ 5Ghz
Motherboard Gigabyte Z690 Aorus Master
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MT/s CL36
Video Card(s) MSI RTX 2070 Super Gaming X Trio
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p
Case Be quiet! Silent Base 600 - Window
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W
Mouse Logitech MX Anywhere 2 Laser wireless
Keyboard RAPOO E9270P Black 5GHz wireless
Software Windows 11
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock
My vcore was set stock, so could be going higher than yours.

What is your ambient temp? mine was about 22-24c

Ambient around 23-24 , same as you, europe, NL and CPU @ stock voltage, I did not tweak anything yet, only set xmp profile for the memory.

Maybe my Aorus Master uses less CPU voltage, not sure, or it runs cooler because of the huge VRM area and my motherboard has a backplate.
 
D

Deleted member 24505

Guest
Ambient around 23-24 , same as you, europe, NL and CPU @ stock voltage, I did not tweak anything yet, only set xmp profile for the memory.

Maybe my Aorus Master uses less CPU voltage, not sure, or it runs cooler because of the huge VRM area and my motherboard has a backplate.

I'm using a very thick EK backplate on my block.

I think i am not utilising my two radiators well enough tbh.
 
Joined
Jan 5, 2006
Messages
18,584 (2.68/day)
System Name AlderLake
Processor Intel i7 12700K P-Cores @ 5Ghz
Motherboard Gigabyte Z690 Aorus Master
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MT/s CL36
Video Card(s) MSI RTX 2070 Super Gaming X Trio
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p
Case Be quiet! Silent Base 600 - Window
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W
Mouse Logitech MX Anywhere 2 Laser wireless
Keyboard RAPOO E9270P Black 5GHz wireless
Software Windows 11
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock
I'm using a very thick EK backplate on my block.

I think i am not utilising my two radiators well enough tbh.
Thought you used a NH-U12A air cooler?
 
Joined
Jan 5, 2006
Messages
18,584 (2.68/day)
System Name AlderLake
Processor Intel i7 12700K P-Cores @ 5Ghz
Motherboard Gigabyte Z690 Aorus Master
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MT/s CL36
Video Card(s) MSI RTX 2070 Super Gaming X Trio
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p
Case Be quiet! Silent Base 600 - Window
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W
Mouse Logitech MX Anywhere 2 Laser wireless
Keyboard RAPOO E9270P Black 5GHz wireless
Software Windows 11
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock
I used this TIM with the creditcard "spread" method.

20220507_150732.jpg


Hope your CPU IHS is not bent.......
 
D

Deleted member 24505

Guest
I used this TIM with the creditcard "spread" method.

View attachment 249629


Hope your CPU IHS is not bent.......
IMG_0118.JPG

It's pretty flat i think, should be ok in the board too i think, the EK backplate should be ok to keep it flat.

Maybe i need to experiment with my block pressure, could it be too much?
 
Joined
Jan 5, 2006
Messages
18,584 (2.68/day)
System Name AlderLake
Processor Intel i7 12700K P-Cores @ 5Ghz
Motherboard Gigabyte Z690 Aorus Master
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MT/s CL36
Video Card(s) MSI RTX 2070 Super Gaming X Trio
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p
Case Be quiet! Silent Base 600 - Window
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W
Mouse Logitech MX Anywhere 2 Laser wireless
Keyboard RAPOO E9270P Black 5GHz wireless
Software Windows 11
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock

Mussels

Freshwater Moderator
Joined
Oct 6, 2004
Messages
58,413 (7.91/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
View attachment 249631
It's pretty flat i think, should be ok in the board too i think, the EK backplate should be ok to keep it flat.

Maybe i need to experiment with my block pressure, could it be too much?
yes, too high pressure can cause the warping this thread is about (and it always could on previous generations, too) - tilting the CPU in the socket let alone the true warping can easily screw with temps
 
D

Deleted member 24505

Guest
yes, too high pressure can cause the warping this thread is about (and it always could on previous generations, too) - tilting the CPU in the socket let alone the true warping can easily screw with temps

I might experiment with the block pressure to see how it effects temps

I think i might edit my fan speed ramp in the bios too.
 
Last edited by a moderator:
Joined
Jan 5, 2006
Messages
18,584 (2.68/day)
System Name AlderLake
Processor Intel i7 12700K P-Cores @ 5Ghz
Motherboard Gigabyte Z690 Aorus Master
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MT/s CL36
Video Card(s) MSI RTX 2070 Super Gaming X Trio
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p
Case Be quiet! Silent Base 600 - Window
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W
Mouse Logitech MX Anywhere 2 Laser wireless
Keyboard RAPOO E9270P Black 5GHz wireless
Software Windows 11
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock
I might experiment with the block pressure to see how it effects temps

I think i might edit my fan speed ramp in the bios too.

Well, I hope you figure it out! :)
 
Top