Your PC ATM

[Super Firm Tofu]

I have the EZDIYFAB support sitting on my desk so I did some measurements. Completely retracted it's still about the height of two PCIe slots. Fully extended it reaches about 4.3". Eyeballing it seems like it might fit your case easily

Thanks for checking the size!

I couldn't remember the exact measurement, so I grabbed the ruler. Looks like I need 62-64mm max height. The EZDYI says it starts at 67mm. It might work depending on how exact their measurements are. The card itself is pretty stiff too. Not as much flex as the Red Devil has. I have an idea that might work using a nut as the base with some form of pad/silicone at the bottom with a bolt that could be used for adjustment with another pad at the contact point on the GPU. I'll see what I can find at Lowe's (hardware store) tomorrow, and might order the EZDYI if I can't make that work. I can always get the Dremel out.

 

[Arco]

Did a bit of trolling cable management.

 

[Veseleil]

Did a bit of trolling cable management.

A man of culture... You sir have my utmost gratitude for not using a damn "insert whole ass photo" option. P.S. thumbnails are fine too.

 

[freeagent]

A man of culture... You sir have my utmost gratitude for not using a damn "insert whole ass photo" option. P.S. thumbnails are fine too.

You don't like scrolling endlessly?

 

[Rithsom]

Did a bit of trolling cable management.

Did you break into my apartment or something? Your carpet and walls are identical to mine. Even the desk placement is the same!

Anyway, nice setup.

 

[tabascosauz]

Thanks for checking the size!

I couldn't remember the exact measurement, so I grabbed the ruler. Looks like I need 62-64mm max height. The EZDYI says it starts at 67mm. It might work depending on how exact their measurements are. The card itself is pretty stiff too. Not as much flex as the Red Devil has. I have an idea that might work using a nut as the base with some form of pad/silicone at the bottom with a bolt that could be used for adjustment with another pad at the contact point on the GPU. I'll see what I can find at Lowe's (hardware store) tomorrow, and might order the EZDYI if I can't make that work. I can always get the Dremel out.

You are right. It is about 66.5mm at min height, too tall. If you take out the spacer it still only goes down to 66mm.

 

[ThrashZone]

Hi,
That D15 I swear is a monster lol
Swapped reservoirs and shortened tubing
I still leave extra tubing so it's easy to pull the reservoir out
Three pairs of quick disconnects...
Still waiting for the copper to tarnish like so many anti copper people say it will, still looks new to me

 

[Rithsom]

Hi,
That D15 I swear is a monster lol
Swapped reservoirs and shortened tubing
I still leave extra tubing so it's easy to pull the reservoir out
Three pairs of quick disconnects...
Still waiting for the copper to tarnish like so many anti copper people say it will, still looks new to me

High-performance air cooling and water cooling working together, in perfect harmony.

Is that your Titan Xp under that block? Thing must perform like a 2080 Ti with a decent overclock, haha.

 

[ThrashZone]

High-performance air cooling and water cooling working together, in perfect harmony.

Is that your Titan Xp under that block? Thing must perform like a 2080 Ti with a decent overclock, haha.

Hi,
Yes it is the titanXp and does better than my 1080ti ftw3 over here which did pretty well on this board and just above a 2080ti no telling what clocks it was doing though

Final Fantasy XIV: Endwalker GPU benchmark/Post Your Scores

Hey guys Final Fantasy XIV:Endwalker GPU benchmark is just released and its free for DOWNLOAD so you can check that out test your GPU and if you want post your score down bellow!!! Attention!! The chart is Full but there is a still chance for you to get into the chart if you have the result...

www.techpowerup.com

Frankly gpu fans are way more irritating than case or cpu cooler fans.

 

[jallenlabs]

Ran some benches on my gaming rig last night. Took notes on temps and energy usage as well as scores. This is will two cores @5.3, four cores at 5.1 and 8 at 5.0ghz.

 

[freeagent]

I'm really starting to dig those big chonky cards. I think one would look good in my setup

Ran some benches on my gaming rig last night. Took notes on temps and energy usage as well as scores. This is will two cores @5.3, four cores at 5.1 and 8 at 5.0ghz.

She's real purdy

 

[Rithsom]

Hi,
Yes it is the titanXp and does better than my 1080ti ftw3 over here which did pretty well on this board and just above a 2080ti no telling what clocks it was doing though

Final Fantasy XIV: Endwalker GPU benchmark/Post Your Scores

Hey guys Final Fantasy XIV:Endwalker GPU benchmark is just released and its free for DOWNLOAD so you can check that out test your GPU and if you want post your score down bellow!!! Attention!! The chart is Full but there is a still chance for you to get into the chart if you have the result...

www.techpowerup.com

Frankly gpu fans are way more irritating than case or cpu cooler fans.

Impressive stuff, man!

 

[freeagent]

Never satisfied..

She’s running WCG on the CPU and F@H on the GPU right now. Last I looked she was at 545w.

 

[INSTG8R]

Never satisfied..

View attachment 280521View attachment 280522

She’s running WCG on the CPU and F@H on the GPU right now. Last I looked she was at 545w.

I like how you’ve been able to use a front panel box effectively. Thankfully my case is so old I still have that option and have a 5 port USB 2,3 and a Type C front panel.

 

[RJARRRPCGP]

Played a bit of tweaking with my Sapphire Nitro+ 5700XT. Used Radeon app and Unigine Heaven. Started with 1.0V, and worked from there, just to simplify things a bit. Found a stable clock with that voltage, then moved to memory. There was an unstable hole somewhere around 1830-1840MHz, but jumping to 1850 was fine. My settings in R app:
View attachment 279955
The result. Maximum values while playing Warzone 2.0, which are the same as the average & current ones anyway (the game maxes out my PC performance with ease, that's why I'm using it as a template):
View attachment 279956
I know it could do better, yet I'm happy as it is for now. Further lowering the voltage makes this card even more efficient, but I want it to stay at 1900MHz. The ambient temp was above 25 Celsius BTW. Overclocking past 2GHz is easy as well, but with a price of noticeably higher noise and 170W+ thanks to higher voltage. For example, the difference with 2030MHz and this (1900) is around 5-10FPS in Warzone 2.0, and it already is between 100-130 most of the time (almost everything on ultra), so...
Just wanted to share, as it's not a content for its own thread. RDNA love to all. Cheers.
Edit: GPU-Z say it's a Micron memory, hasn't been "teared down" yet:
View attachment 279957


No water love for the CPU anymore, huh?

Doesn't seem better with OC'ing than my "jailbreak" RX 5600 XT was, at a glance. I could do 1.9 GHz @ 1137mV. Maybe 1000mV? I could to 2.0 GHz @1137mV in GTA V, IIRC. (RIP Navi10 for bricking, because I put stock VBIOS back on, but things went to the worst-case scenario when I wanted to go back to an unlocked VBIOS) (It looked like I needed to use beta versions of tools, but I didn't)

But, you said that you can go past 2.0? No way I could, it would crash hard! (if you mean 2.1!)

Played a bit of tweaking with my Sapphire Nitro+ 5700XT. Used Radeon app and Unigine Heaven. Started with 1.0V, and worked from there, just to simplify things a bit. Found a stable clock with that voltage, then moved to memory. There was an unstable hole somewhere around 1830-1840MHz, but jumping to 1850 was fine. My settings in R app:
View attachment 279955
The result. Maximum values while playing Warzone 2.0, which are the same as the average & current ones anyway (the game maxes out my PC performance with ease, that's why I'm using it as a template):
View attachment 279956
I know it could do better, yet I'm happy as it is for now. Further lowering the voltage makes this card even more efficient, but I want it to stay at 1900MHz. The ambient temp was above 25 Celsius BTW. Overclocking past 2GHz is easy as well, but with a price of noticeably higher noise and 170W+ thanks to higher voltage. For example, the difference with 2030MHz and this (1900) is around 5-10FPS in Warzone 2.0, and it already is between 100-130 most of the time

WHEA when the VRAM wasn't stable? That's what seems to happen, especially with my Navi10. And my max limit is roughly the same, if at 2030-2040? MHz. IIRC, I could go into GTA V with that.

GPU past limit=Freeze and have to hold down the power button or a driver timeout. Also, a random Direct3D-init-failed pop-up from GTA V in game.

VRAM past limit=Often a fatal WHEA, with "Cache Hierarchy Error" as reason.

 

[igralec84]

Side glass off so 2°C lower temps for that sweet extra benchmark points (and 3Dmark hall of fame results) One day i might actually get round to cable management and maybe go 3x120 at the bottom instead of 2x140

 

[RJARRRPCGP]

Side glass off so 2°C lower temps for that sweet extra benchmark points (and 3Dmark hall of fame results) One day i might actually get round to cable management and maybe go 3x120 at the bottom instead of 2x140

View attachment 280526

Believe it or not, there's almost no card that's much bigger than the Sapphire Nitro+ RX 6750 XT! (in physical size)

To go another league in that, it would have to be like a '3080, if not like a '3090 and '4090! Got the RX 6750 XT out of the box back in July, 2022 and it's a big honker!

It makes the RX 6600 XT look more like a GTX 1650, LOL.

 

[igralec84]

Believe it or not, there's almost no card that's much bigger than the Sapphire Nitro+ RX 6750 XT! (in physical size)

To go another league in that, it would have to be like a '3080, if not like a '3090 and '4090!

I think XFX Merc is 340mm long, this Gainward of mine is 330mm and i'm sure there's some other 340-345mm around 310mm these days is quite okay while 280mm is small

 

[RJARRRPCGP]

I think XFX Merc is 340mm long, this Gainward of mine is 330mm and i'm sure there's some other 340-345mm around

I know it's probably not the longest, but it's really got that 3-fan heatsink action going! Much longer, then it wouldn't be able to fit even my big case!

I didn't measure it, but it's a healthy size! It sure seems wide. I think that's why it came with a brace-bracket.

 

[Veseleil]

Doesn't seem better with OC'ing than my "jailbreak" RX 5600 XT was, at a glance. I could do 1.9 GHz @ 1137mV. Maybe 1000mV? I could to 2.0 GHz @1137mV in GTA V, IIRC. (RIP Navi10 for bricking, because I put stock VBIOS back on, but things went to the worst-case scenario when I wanted to go back to an unlocked VBIOS) (It looked like I needed to use beta versions of tools, but I didn't)

But, you said that you can go past 2.0? No way I could, it would crash hard! (if you mean 2.1!)


WHEA when the VRAM wasn't stable? That's what seems to happen, especially with my Navi10. And my max limit is roughly the same, if at 2030-2040? MHz. IIRC, I could go into GTA V with that.

GPU past limit=Freeze and have to hold down the power button or a driver timeout. Also, a random Direct3D-init-failed pop-up from GTA V in game.

VRAM past limit=Often a fatal WHEA, with "Cache Hierarchy Error" as reason.

1.0V vs 1.1V makes a huge difference in my case. Remember, the stock voltage for the 5700XT is 1.2V. I've flashed the 240W 1.8GHz (RAM) BIOS onto the silent one, but even switching back to the normal (220W 1.75GHz RAM) seems to stuck with the same parameters (the difference between those two is just the power limit and the stock mem clock).
It can do above 2.2GHz with no problem, if I just give it the sweet voltage juice and prepare my ears for a jet engine sounds. It was a long time ago I've even tried that though, but with the higher power limit it can do much more I think, not to mention what could be done with tools from Igor's Lab. I'll get into it, once I deshroud the card, because the cooling and noise are the limiting factor.
With the settings I've posted, the card is stable 100%, for now.

and maybe go 3x120 at the bottom instead of 2x140

2x140 over 3x120 any day. The PC cases that don't support the 140mm fan by the motherboard I/O side (back panel) I consider being stuck in the past. Excluding the mITX of course. I hate the 120mm fans.

 

[RJARRRPCGP]

1.0V vs 1.1V makes a huge difference in my case. Remember, the stock voltage for the 5700XT is 1.2V. I've flashed the 240W 1.8GHz (RAM) BIOS onto the silent one, but even switching back to the normal (220W 1.75GHz RAM) seems to stuck with the same parameters (the difference between those two is just the power limit and the stock mem clock).
It can do above 2.2GHz with no problem, if I just give it the sweet voltage juice and prepare my ears for a jet engine sounds. It was a long time ago I've even tried that though, but with the higher power limit it can do much more I think, not to mention what could be done with tools from Igor's Lab. I'll get into it, once I deshroud the card, because the cooling and noise are the limiting factor.

I came back to Igor's Lab to no avail in very-late-December, 2021, that's when I had to pop the GeForce GTX 1660 Super in. Fat chance it could even do 2.2! It would be an insta-crash!
But, being an RX 5600 XT, why didn't 1200 mV help?! Did I have wrong VBIOS settings? Even when my variant was with 2x 8-pin power connectors!

I know that I was able the fix the "crashes at the lobby and entering another game mode in GTA V" issue, where it dies with a light-medium load and game mode changes, such as I want to enter Arena Wars from Los Santos and vice-versa.

I don't even care about that Navi10 anymore with the fact that I got an RX 6600 XT and also the RX 6750 XT.

IIRC, I have another MSI Navi 1, an RX 5500 XT with 8 GB of RAM. The only problem I spotted: At defaults, I saw at least 79 C for the hotspot, even when I changed the GPU TIM. (In Beam NG . drive)

 

[freeagent]

Thankfully my case is so old I still have that option and have a 5 port USB 2,3 and a Type C front panel.

I actually just retired my R4 for now. Its actually the only case that I have for my Z77 OCFormula

I will buy a real killawatt one day.. but the only thing that controller is doing is watching the wall.

 

[tabascosauz]

quick, low effort desk setup plug less RGB = moar productivity

 

[Veseleil]

quick, low effort desk setup plug less RGB = moar productivity

View attachment 280624

Noice. Thought you're doing coding at first glance.

 

[tabascosauz]

Noice. Thought you're doing coding at first glance.

I wish I had any talent whatsoever in that area