- Joined
- Feb 15, 2009
- Messages
- 642 (0.11/day)
- Location
- Norway, which means Amazon is not available...
| System Name | Winter v3.2024 |
|---|---|
| Processor | Intel i7 12700K (since november 2021) |
| Motherboard | Gigabyte Z690 Gaming X (since november 2021) |
| Cooling | Air Liquid Freezer II 360 with LGA1700 kit (since november 2021) |
| Memory | Crucial Ballistix 2x16gb 3600mhz C16 (since november 2021) |
| Video Card(s) | Gigabyte RTX 3060 Ti Gaming OC Pro LHR - Rev3.0 (since july 2022) |
| Storage | 1x 1TB WD Blue SN570 SSD, 1x Seagate 4TB SATA |
| Display(s) | 1x 55" LG C1 4k OLED, 1x Gigabyte 32" M32Q and 2x AOC 27" CG1 |
| Case | Fractal Design Define R6 (since 2018 and still working like a charm!) |
| Power Supply | Corsair RM850x black (since august 2022) |
| Mouse | Razor Deathadder v2 (since december 2021) |
| Keyboard | Varmilo VEA109 v2 MX Silent Red (since august 2022) |
| Software | Windows 11 Pro |
There is no sound from my speakers when connecting the Z906 with optical to my PC. It used to work until a couple of days ago before I had to re-organize the speakers (disconnecting cables etc.), but upon reconnecting the speakers, they do not work anymore...
Furthermore, when I go through the different inputs on the z906, I see the orange light on the input, power-button and volume meter, but no light on "decode" and "effect" when I have it set on the input that applies to the optical (in my case, input 3). But when I switch it to input 2, it shows light on the effect (3d, 2.1 etc.)
I have updated the audio drivers on my Windows 10 PC, i have tried to factory reset the Z906 and tried to change the optical cable, but still no sound. However, when I use my headphones (connected through Revelator io44), the sound is working fine, so there's nothing wrong with the PC sound, I guess...
Any ideas what can be wrong and how I can get sound working again on my Z906?
Furthermore, when I go through the different inputs on the z906, I see the orange light on the input, power-button and volume meter, but no light on "decode" and "effect" when I have it set on the input that applies to the optical (in my case, input 3). But when I switch it to input 2, it shows light on the effect (3d, 2.1 etc.)
I have updated the audio drivers on my Windows 10 PC, i have tried to factory reset the Z906 and tried to change the optical cable, but still no sound. However, when I use my headphones (connected through Revelator io44), the sound is working fine, so there's nothing wrong with the PC sound, I guess...
Any ideas what can be wrong and how I can get sound working again on my Z906?
