sergoblender
New Member
- Joined
- Feb 13, 2024
- Messages
- 8 (0.04/day)
Please read the entire post (Please help me), it is a little long as it may seem at first glance, but this is only because of the pictures and explanations of everything. I tried to provide as much information as possible.
Hi all. I bought several GPU Sapphire(Nitro) RX 470 8 GB Mining Edition.
Initially, they are supplied without any ports (DVI, etc.), but this can be fixed, which is what I did.
Now I have three video cards with HDMI ports that my dad and I made, and I can connect my monitor. Everything works on the monitor, and I see the picture, and everything seems not so bad, but if I go to the "Device Manager" I see that the video card starts (disabled?) with error 43. And the error appears after installing any AMD drivers. Also, after installing the drivers, before being asked to restart the PC, I receive a message that AMD has found a problem with my drivers/video card.
The next thing I did was try to reflash this video card, I tried to flash it with both the original VBIOS from this video card (Mining Edition) and the VBIOS from the PX570 with similar memory and a frequency +-5% higher than the stock one. I even tried firmware from 580, which on this site was listed as 470 (for some reason). Below I will attach the stock(?) BIOS that was on these video cards.
The next thing I did was use a program (patcher) "atikmdag patcher", and paired with the VBIOS from the PX570, everything worked, provided that the patcher was used, and the patcher was installed in about 2-3 attempts and several reboots.
VBIOS from RX570 Nitro+ which i used https://www.techpowerup.com/vgabios/197478/sapphire-rx570-8192-170310-1
So now I can use these GPUs in my PCs, but as you can imagine, installing the patcher takes some time and is not exactly the solution I was looking for.
Since I have more than one such GPU, and I want to sell them, the option with Patcher is not very suitable for me, since on different PCs sometimes it does not work the first time, and it will be a little difficult. And I’m sure that many people are faced with this problem, since now these video cards are useless in Mining and cost quite little, with quite a lot of potential in games.
Is it possible to somehow fix this error permanently? Or what can I do? How do they understand that there is something wrong with the video card/driver if I completely reflash the VBIOS, and therefore change the P/N and also the Sub ID and the entire identification of the video card that may be contained in the VBIOS on the PX570.
I will be grateful for any help, and of course I will be glad to any guesses, discussions and everything that you write. I will gradually update this Thread as problems are found/solved.
Hi all. I bought several GPU Sapphire(Nitro) RX 470 8 GB Mining Edition.
Initially, they are supplied without any ports (DVI, etc.), but this can be fixed, which is what I did.
Now I have three video cards with HDMI ports that my dad and I made, and I can connect my monitor. Everything works on the monitor, and I see the picture, and everything seems not so bad, but if I go to the "Device Manager" I see that the video card starts (disabled?) with error 43. And the error appears after installing any AMD drivers. Also, after installing the drivers, before being asked to restart the PC, I receive a message that AMD has found a problem with my drivers/video card.
The next thing I did was try to reflash this video card, I tried to flash it with both the original VBIOS from this video card (Mining Edition) and the VBIOS from the PX570 with similar memory and a frequency +-5% higher than the stock one. I even tried firmware from 580, which on this site was listed as 470 (for some reason). Below I will attach the stock(?) BIOS that was on these video cards.
The next thing I did was use a program (patcher) "atikmdag patcher", and paired with the VBIOS from the PX570, everything worked, provided that the patcher was used, and the patcher was installed in about 2-3 attempts and several reboots.
VBIOS from RX570 Nitro+ which i used https://www.techpowerup.com/vgabios/197478/sapphire-rx570-8192-170310-1
So now I can use these GPUs in my PCs, but as you can imagine, installing the patcher takes some time and is not exactly the solution I was looking for.
Since I have more than one such GPU, and I want to sell them, the option with Patcher is not very suitable for me, since on different PCs sometimes it does not work the first time, and it will be a little difficult. And I’m sure that many people are faced with this problem, since now these video cards are useless in Mining and cost quite little, with quite a lot of potential in games.
Is it possible to somehow fix this error permanently? Or what can I do? How do they understand that there is something wrong with the video card/driver if I completely reflash the VBIOS, and therefore change the P/N and also the Sub ID and the entire identification of the video card that may be contained in the VBIOS on the PX570.
I will be grateful for any help, and of course I will be glad to any guesses, discussions and everything that you write. I will gradually update this Thread as problems are found/solved.