AM5 boot times improve RADICALLY with memory context restore enabled

GerKNG · May 14, 2024

Space Lynx said:
@GerKNG is your B650E steel legend having memory context enabled by default?

I just checked and in my BIOS it actually is enabled by default... that's why my boot times are most instantaneous... huh strange, if it causes so many problems, why would AsRock have it on by default? (stock bios when I looked)

enabled by default and i never had any issues with it.
it just works (except with manual overclocking)

Bagerklestyne · May 15, 2024

I am now concerned to update my BIOS (mostly because of the beta bios's rolling for the 9000 series chips)

I think I need to though (my SSD is still showing as a usb/unpluggable in windows)

Cifu · May 15, 2024

mb194dc said:
It's absolutely shocking am5 was released in this state and the long boot times are still going on. Surely there was a better design solution with memory training?

For the record: two option -

Memory Context Restore (MCR) -> One training and after the result loaded each start
DRAM PowerDown Disable -> you got minus (means better) 1-1.5ns latency in Aida64 memory benchmark.

You cannot use both, because it's can cause hard boot loop or even Windows file loss.
Several firm (like AsRock or MSI) use the MCR enabled by default.
Several other (like ASUS) use the MCR disabled by default.

The background is simple: in the early times there is a Youtuber named BuildZoid (actually hardcore overclocking) and he's guide mentioned the PowerDown disable settings.
Not one and not two person experienced then boot loop or even corrupted Windows files because of this settings used the MCR enabled setting.
The ASUS for example changed the UEFI after that and if you enable the MCR, the PowerDown Enabled (yea, this is the name) jumped disable and vica versa...

I actually use the MCR enabled and Powerdown disable with severe memory tuning (DDR5-6000 CL36 1.35V -> CL28 1.4V) without any issue:

Space Lynx · May 15, 2024

Cifu said:
I actually use the MCR enabled and Powerdown disable with severe memory tuning (DDR5-6000 CL36 1.35V -> CL28 1.4V) without any issue:

you got me kind of tempted to do 1.4v and cl28 now, those are only the only two changes I have to make? i just enable EXPO, reboot, then change to 1.40v and the first 36 to 28 and reboot and done? do all the ram tests to make sure its good with no errors, but thats it?

leave everything else stock? my ram is the teamgroup t-power create ram 6000 (in my specs)

this is my ram: its fully stable with expo, i already ran several ram tests

Cifu · May 15, 2024

Space Lynx said:
you got me kind of tempted to do 1.4v and cl28 now, those are only the only two changes I have to make? i just enable EXPO, reboot, then change to 1.40v and the first 36 to 28 and reboot and done? do all the ram tests to make sure its good with no errors, but thats it?

leave everything else stock? my ram is the teamgroup t-power create ram 6000 (in my specs)

this is my ram: its fully stable with expo, i already ran several ram tests

View attachment 347459

The RAM tuning a bit tricky in AM5 / DDR5...
I suggest you first check your RAM kit at the HWinfo64 memory menu.

The best DRAM kits are made with SK Hynix A-Die, then M-Die.
Then follow a big dip with Samsung B-Die & Micron REV A / REV G.
Another big dip the Samsung D-Die.
The Micron REV B is anti-tuning as far as I know.

If you have A-Die or M-Die, then you can try it.
Foreword: DDR5 RAM settings calculator - make a local copy and you can explore it

Suggestion (and as always: I cannot guarantee anything and can't take any responsibility, just try to help with my personal experience):

-VDD and VDDQ raised to 1.4V
-Timings:
tCL 28
tRCD 36
tRP 36
tRAS 48
tRC 84

The other big thing is the tREFI (Resfresh Rate in ASUS) which can be 49151 or 65535 (the latter is the upper limit az AM5)
The other big thing is the tRFC, this is a hard one, highly depending of the DRAM type:

Hynix A-die DDR5-6000
tRFC: 416

Hynix M-die DDR5-6000
tRFC: 510

Samsung B-Die, Micron REV A, REV G DDR5-6000
tRFC: 832

Samsung D-Die DDR5-6000
tRFC: 864

And if you try anything, first test for a longer period (half a hour minimum) with Aida64 stress test, y-cruncher, TM5 or so.
If you change anything in you UEFI memory settings after the reboot there is a new memory traning phase starting, means longer period of black screen before POST screen.
Be patient and remain calm.

If the black screen remain after 4-5 minutes, do a BIOS reset and step back about the changes you made (ie.: if the tRFC 416 wont boot, then try 436 and so on).

Space Lynx · May 15, 2024

Cifu said:
The RAM tuning a bit tricky in AM5 / DDR5...
I suggest you first check your RAM kit at the HWinfo64 memory menu.

The best DRAM kits are made with SK Hynix A-Die, then M-Die.
Then follow a big dip with Samsung B-Die & Micron REV A / REV G.
Another big dip the Samsung D-Die.
The Micron REV B is anti-tuning as far as I know.

If you have A-Die or M-Die, then you can try it.
Foreword: DDR5 RAM settings calculator - make a local copy and you can explore it

Suggestion (and as always: I cannot guarantee anything and can't take any responsibility, just try to help with my personal experience):

-VDD and VDDQ raised to 1.4V
-Timings:
tCL 28
tRCD 36
tRP 36
tRAS 48
tRC 84

The other big thing is the tREFI (Resfresh Rate in ASUS) which can be 49151 or 65535 (the latter is the upper limit az AM5)
The other big thing is the tRFC, this is a hard one, highly depending of the DRAM type:

Hynix A-die DDR5-6000
tRFC: 416

Hynix M-die DDR5-6000
tRFC: 510

Samsung B-Die, Micron REV A, REV G DDR5-6000
tRFC: 832

Samsung D-Die DDR5-6000
tRFC: 864

And if you try anything, first test for a longer period (half a hour minimum) with Aida64 stress test, y-cruncher, TM5 or so.
If you change anything in you UEFI memory settings after the reboot there is a new memory traning phase starting, means longer period of black screen before POST screen.
Be patient and remain calm.
If the black screen remain after 4-5 minutes, do a BIOS reset and step back about the changes you made (ie.: if the tRFC 416 wont boot, then try 436 and so on).

I'm pretty sure I read somewhere mine is M-Die, if I get bored tomorrow I will give this a go and run the ram tests, thanks for your detailed help, very much appreciated.

LethaR · May 15, 2024

Cifu said:
The RAM tuning a bit tricky in AM5 / DDR5...
I suggest you first check your RAM kit at the HWinfo64 memory menu.

The best DRAM kits are made with SK Hynix A-Die, then M-Die.
Then follow a big dip with Samsung B-Die & Micron REV A / REV G.
Another big dip the Samsung D-Die.
The Micron REV B is anti-tuning as far as I know.

If you have A-Die or M-Die, then you can try it.
Foreword: DDR5 RAM settings calculator - make a local copy and you can explore it

Suggestion (and as always: I cannot guarantee anything and can't take any responsibility, just try to help with my personal experience):

-VDD and VDDQ raised to 1.4V
-Timings:
tCL 28
tRCD 36
tRP 36
tRAS 48
tRC 84

The other big thing is the tREFI (Resfresh Rate in ASUS) which can be 49151 or 65535 (the latter is the upper limit az AM5)
The other big thing is the tRFC, this is a hard one, highly depending of the DRAM type:

Hynix A-die DDR5-6000
tRFC: 416

Hynix M-die DDR5-6000
tRFC: 510

Samsung B-Die, Micron REV A, REV G DDR5-6000
tRFC: 832

Samsung D-Die DDR5-6000
tRFC: 864

And if you try anything, first test for a longer period (half a hour minimum) with Aida64 stress test, y-cruncher, TM5 or so.
If you change anything in you UEFI memory settings after the reboot there is a new memory traning phase starting, means longer period of black screen before POST screen.
Be patient and remain calm.
If the black screen remain after 4-5 minutes, do a BIOS reset and step back about the changes you made (ie.: if the tRFC 416 wont boot, then try 436 and so on).

Ive been pretty tempted lately to do some tweaking in my ram. I just enabled EXPO and set manually 6000mhz instead of the 6400 of the expo profile (i have 2x32gb and trying to boot with +6000 is probably going to be pretty difficult). My ram is pretty solid, cl32 and SK Hynix A-die, you think i should try these settings?

Cifu · May 15, 2024

LethaR said:
Ive been pretty tempted lately to do some tweaking in my ram. I just enabled EXPO and set manually 6000mhz instead of the 6400 of the expo profile (i have 2x32gb and trying to boot with +6000 is probably going to be pretty difficult). My ram is pretty solid, cl32 and SK Hynix A-die, you think i should try these settings?

From the AGESA 1.0.0.7b version of BIOS (circa 2023 august) I find the AMD covered the memory handling problems of the Zen4 CPU's and mostly can reach the DDR5-6400 without problem.
Means: I bought an Apacer DDR5-6400 kit, put in my system and choose the RAM own XMP (DOCP in AMD) profile and booted without any problem.
So after you have an updated BIOS, I suggest you can try the DDR5-6400 profile. OFC there is a chance it's won't boot, but at least try it once...

Edit: I have a second AM5 computer (HTPC / file server with Ryzen 8500G) that one use the Apacer kit currently while the desktop computer got back the 64GB DDR5-6000 Fury Beast kit.

tabascosauz · May 15, 2024

LethaR said:
Ive been pretty tempted lately to do some tweaking in my ram. I just enabled EXPO and set manually 6000mhz instead of the 6400 of the expo profile (i have 2x32gb and trying to boot with +6000 is probably going to be pretty difficult). My ram is pretty solid, cl32 and SK Hynix A-die, you think i should try these settings?

Don't write it off just because it's 2x32GB. As long as your board and memory controller aren't actual garbage, there's a good chance you can. I don't think dual rank is that much of a problem anymore for AMD.

LethaR · May 15, 2024

tabascosauz said:
Don't write it off just because it's 2x32GB. As long as your board and memory controller aren't actual garbage, there's a good chance you can. I don't think dual rank is that much of a problem anymore for AMD.

View attachment 347461

okay then, you both convinced me. Im going to try 6400 today when i get home. I have also set MCLK = UCLK, should i set FLCK manually to 2167 or 2200 or just leave it on auto? ill try first to boot on 6400 and then ill try going from cl32 to 28

Cifu · May 15, 2024

The FCLK is not attached to the UCLK / MCLK in any way at AM5 / Zen4.
Leave the 2000 Mhz at first, then you can raise that too after the memory run stable.

In my experience the FCLK mostly cause game instability I used the 2200Mhz without problem in everyday work and several stress test (CB23, Aida64).
Yet in gaming I experience constants drops to the Windows desktop. At 2167Mhz I won't experience any such thing...

Silicon lottery at the best...

tabascosauz · May 15, 2024

LethaR said:
okay then, you both convinced me. Im going to try 6400 today when i get home. I have also set MCLK = UCLK, should i set FLCK manually to 2167 or 2200 or just leave it on auto? ill try first to boot on 6400 and then ill try going from cl32 to 28

You will want to go as much as you can beyond 2000 on FCLK as it will make a difference. How far you get only you can find out for yourself. 2167 is no issue for me at any VSOC but so far struggling a bit with 2200.

FCLK has a tricky relationship with VSOC, higher VSOC helps UCLK but hampers fabric stability. So if you can't boot x FCLK, it may not work at any VSOC you throw at it

Stabilize your 6400 UCLK/FCLK first before you worry about CL28. UCLK stability is distinct from but an important part of ram stability now.

Launcestonian · May 15, 2024

OP, enabling MCR has been known for over a year & more now to quicken boot times on Zen 4.

Taraquin · May 15, 2024

I wish AMD would desync MCR from PDM. I can`t see why these 2 features must be linked. PDM introduces extra latency\reduces performance in certain scenarios and is only a sensible feature on notebooks in my opinion.

dgianstefani · May 15, 2024

I have it off due to manual timings, voltages and subtimings. No issue with long boot times.

If you don't manually set everything it uses the motherboard algorithm to train every time which is what takes a while. EXPO/XMP only holds basic voltages and main timings.

Simple solution is to set things manually, validate with stability testing, and avoid automatic shenanigans. Fast boot plus no instability.

Better performance too.

MCR breaks some tuning settings as mentioned which leaves performance on the table, often results in eventual instability, and uses mobo auto values for memory, so it's at best stable and slow and at worst unstable and slow.

LethaR · May 15, 2024

tabascosauz said:
You will want to go as much as you can beyond 2000 on FCLK as it will make a difference. How far you get only you can find out for yourself. 2167 is no issue for me at any VSOC but so far struggling a bit with 2200.

FCLK has a tricky relationship with VSOC, higher VSOC helps UCLK but hampers fabric stability. So if you can't boot x FCLK, it may not work at any VSOC you throw at it

Stabilize your 6400 UCLK/FCLK first before you worry about CL28. UCLK stability is distinct from but an important part of ram stability now.

already did, no issues for the moment, it booted first try. Currently 6400 cl32 2x32gb UCLK=MEMCLK, 2000 FCLK

Launcestonian said:
OP, enabling MCR has been known for over a year & more now to quicken boot times on Zen 4.

Yeah yeah i know, but i also read it wasnt really stable in most cases just some months ago, but it seems is fixed for now. I just wanted to show people how much of a difference it can make

Easo · May 15, 2024

I somehow missed the MCR thing - it might explain random memory BSOD's I have received from time to time (though partially related to BIOS versions).

AusWolf · May 15, 2024

Cifu said:
Several firm (like AsRock or MSI) use the MCR enabled by default.
Several other (like ASUS) use the MCR disabled by default.

My MSI board has MCR disabled by default.

Space Lynx · May 16, 2024

My boot time from shut down to start is around 9 seconds now.

I have fast boot turned off in BIOS and in power settings of windows 11. it was only slow for me the first boot or two. AsRock must know its stable if they enable it by default... I hope, lmao so far so good so yeah, not had any of the boot time issues others have had and I guess we now know why, in fact I think this board might be the record holder on speed, it is a new re-design mobo so maybe that's why (this mobo just came out in March of this year)

Launcestonian · May 16, 2024

Space Lynx said:
My boot time from shut down to start is around 9 seconds now.

I have fast boot turned off in BIOS and in power settings of windows 11. it was only slow for me the first boot or two. AsRock must know its stable if they enable it by default... I hope, lmao so far so good so yeah, not had any of the boot time issues others have had and I guess we now know why, in fact I think this board might be the record holder on speed, it is a new re-design mobo so maybe that's why (this mobo just came out in March of this year)

View attachment 347546

Asrock's range of steel legend boards for AM5 are the best for fast boot with MCR enabled. Your boot times to windows match mine. But agesa versions may play into this. I'm still on 2.00 bios.

lolek86 · May 16, 2024

On latest agesa Asus is also very quick currently. MCR and fast startup enabled.

Panther_Seraphin · May 16, 2024

ASrock Steel Legend X670E running 4x16Gb DIMMs with custom timing

jarablue · May 16, 2024

Asus Prime X670-P WIFI board with UD5-6000 Teamgroup DDR5 Memory 16GBx2.

Panther_Seraphin · May 16, 2024

jarablue said:
Asus Prime X670-P WIFI board with UD5-6000 Teamgroup DDR5 Memory 16GBx2.

Missing the last Bios time

Win 11
Task Manager > Startup Apps > Top right hand corner

jarablue · May 17, 2024

Panther_Seraphin said:
Missing the last Bios time

Win 11
Task Manager > Startup Apps > Top right hand corner

11.4 seconds.

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASRock B650E Steel Legend Wifi
Cooling	Arctic Liquid Freezer III 280
Memory	2x16GB Corsair Vengeance RGB 6000 CL30 (A-Die)
Video Card(s)	RTX 4090 Gaming X Trio
Storage	1TB Samsung 990 PRO, 4TB Corsair MP600 PRO XT, 1TB WD SN850X, 4x4TB Crucial MX500
Display(s)	Alienware AW2725DF, LG 27GR93U, LG 27GN950-B
Case	Streacom BC1 V2 Black
Audio Device(s)	Bose Companion Series 2 III, Sennheiser GSP600 and HD599 SE - Creative Soundblaster X4
Power Supply	bequiet! Dark Power Pro 12 1500w Titanium
Mouse	Razer Deathadder V3
Keyboard	Razer Black Widow V3 TKL
VR HMD	Oculus Rift S
Software	~2000 Video Games

System Name	Blytzen
Processor	Ryzen 7 7800X3D
Motherboard	ASRock B650E Taichi Lite
Cooling	Deepcool LS520 (240mm)
Memory	G.Skill Trident Z5 Neo RGB 64 GB (2 x 32 GB) DDR5-6000 CL30
Video Card(s)	Powercolor 6800XT Red Dragon (16 gig)
Storage	2TB Crucial P5 Plus SSD, 80TB spinning rust in a NAS
Display(s)	MSI MPG321URX QD-OLED (32", 4k, 240hz), Samsung 32" 4k
Case	Coolermaster HAF 500
Audio Device(s)	Logitech G733 and a Z5500 running in a 2.1 config (I yeeted the mid and 2 satellites)
Power Supply	Corsair HX850
Mouse	Logitech G502X lightspeed
Keyboard	Logitech G915 TKL tactile
Benchmark Scores	Squats and calf raises

Processor	Ryzen 7700X
Motherboard	ASUS ROG Strix B650E-E Gaming Wifi
Cooling	Noctua NH-D15 w/ offset kit
Memory	Kingston Fury Beast DDR5-6000 CL36 @ CL28
Video Card(s)	ASUS x Noctua RTX 4080
Storage	Samsung 980Pro 2TB NVME + Kingston KC3000 2TB NVME
Display(s)	LG OLED 42C3 + Benq GW 2780-1
Case	Fractal Design Define R6
Audio Device(s)	Onkyo TX-SR505 /w onboard audio
Power Supply	Fractal Design Ion 850W Platinum
Mouse	Razer Viper 8K
Keyboard	Ventaris K600

Processor	7800X3D -25 all core
Motherboard	B650 Steel Legend
Cooling	Frost Commander 140
Video Card(s)	Merc 310 7900 XT @3100 core -.75v
Display(s)	Agon 27" QD-OLED Glossy 240hz 1440p
Case	NZXT H710 (Red/Black)
Audio Device(s)	Asgard 2, Modi 3, HD58X
Power Supply	Corsair RM850x Gold

Processor	Ryzen 7700X
Motherboard	ASUS ROG Strix B650E-E Gaming Wifi
Cooling	Noctua NH-D15 w/ offset kit
Memory	Kingston Fury Beast DDR5-6000 CL36 @ CL28
Video Card(s)	ASUS x Noctua RTX 4080
Storage	Samsung 980Pro 2TB NVME + Kingston KC3000 2TB NVME
Display(s)	LG OLED 42C3 + Benq GW 2780-1
Case	Fractal Design Define R6
Audio Device(s)	Onkyo TX-SR505 /w onboard audio
Power Supply	Fractal Design Ion 850W Platinum
Mouse	Razer Viper 8K
Keyboard	Ventaris K600

AM5 boot times improve RADICALLY with memory context restore enabled

GerKNG

Bagerklestyne

Cifu

Attachments

Space Lynx

Astronaut

Cifu

Space Lynx

Astronaut

LethaR

Cifu

Attachments

tabascosauz

Moderator

LethaR

Cifu

tabascosauz

Moderator

Launcestonian

Taraquin

dgianstefani

TPU Proofreader

LethaR

Easo

AusWolf

Space Lynx

Astronaut

Launcestonian

lolek86

Attachments

Panther_Seraphin

jarablue

Panther_Seraphin

jarablue

System Name	My Gaming Rig
Processor	Ryzen 9 7900x
Motherboard	MSI B650m Project Zero
Cooling	Lian-Li Galahad 360mm AIO White (+8 Lian-Li SL120 White Fans -> 11 in total)
Memory	KingBank 64GB (2x32GB) DDR5 6400 CL32
Video Card(s)	Nvidia Geforce RTX 4080 Gigabyte AERO OC
Storage	500GB + 240GB SATA SSD, 1TB (Windows) m.2 Nvme SSD + 2TB (Games) m.2 Nvme SSD
Display(s)	Xiaomi MI 34" (34", 3440x1440p, 144Hz, VA), MSI Oculus NXG253R (24.5", 1920x1080p, 360Hz, Fast IPS)
Case	CORSAIR 2500D Airflow (White)
Audio Device(s)	Corsair Virtuoso RGB Wireless (White)
Power Supply	CoolerMaster V SFX 1100W Platinum (ATX 3.0, PCIe 5.0)
Mouse	LogiTech G502 HERO SE
Keyboard	Custom Anne Pro 2 60% Keyboard (Gateron Red Switches)
Software	Windows 10
Benchmark Scores	Heaven Benchmark 1080p EXTREME: 8323 3D Mark Time Spy Score: 26736 (Excellent)

System Name	ab┃ob
Processor	7800X3D┃5800X3D
Motherboard	B650E PG-ITX┃X570 Impact
Cooling	NH-U12A + T30┃AXP120-x67
Memory	64GB 6400CL32┃32GB 3600CL14
Video Card(s)	RTX 4070 Ti Eagle┃RTX A2000
Storage	8TB of SSDs┃1TB SN550
Case	Caselabs S3┃Lazer3D HT5

System Name	No.1
Processor	Ryzen 9 9900X with custom PBO + 2200 FCLK fully stable
Motherboard	B650 Gigabyte Aorus Elite v1.0
Cooling	Thermaltake toughair 710 + Thermal Grizzly Kryonaut extreme
Memory	Patriot Viper PVV532G740C36K @ 6200MT/s 30-36-36-63 1:1
Video Card(s)	Asus TUF gaming RX 7900 XTX OC edition
Storage	1TB T-Force Z44A7 + 2TB T-Force A440 Pro
Display(s)	34 " Asus TUF Gaming VG3A series
Case	Antec C8 constellation white edition
Audio Device(s)	Asus Xonar AE 7.1 + Logitech Z906
Power Supply	Corsair RM1000x V2
Mouse	MSI Clutch GM20 Elite
Keyboard	Logitech G512 Carbon

Processor	7800X3D 2x16GB CO
Motherboard	Asrock B650m HDV
Cooling	Peerless Assassin SE
Memory	2x16GB DR A-die@6000c30 tuned
Video Card(s)	Asus 4070 dual OC 2610@915mv
Storage	WD blue 1TB nvme
Display(s)	Lenovo G24-10 144Hz
Case	Corsair D4000 Airflow
Power Supply	EVGA GQ 650W
Software	Windows 10 home 64
Benchmark Scores	Superposition 8k 5267 Aida64 58.5ns

System Name	Silent
Processor	Ryzen 7800X3D @ 5.15ghz BCLK OC, TG AM5 High Performance Heatspreader
Motherboard	ASUS ROG Strix X670E-I, chipset fans replaced with Noctua A14x25 G2
Cooling	Optimus Block, HWLabs Copper 240/40 + 240/30, D5/Res, 4x Noctua A12x25, 1x A14G2, Mayhems Ultra Pure
Memory	32 GB Dominator Platinum 6150 MT 26-36-36-48, 56.6ns AIDA, 2050 FCLK, 160 ns tRFC, active cooled
Video Card(s)	RTX 3080 Ti Founders Edition, Conductonaut Extreme, 18 W/mK MinusPad Extreme, Corsair XG7 Waterblock
Storage	Intel Optane DC P1600X 118 GB, Samsung 990 Pro 2 TB
Display(s)	32" 240 Hz 1440p Samsung G7, 31.5" 165 Hz 1440p LG NanoIPS Ultragear, MX900 dual gas VESA mount
Case	Sliger SM570 CNC Aluminium 13-Litre, 3D printed feet, custom front, LINKUP Ultra PCIe 4.0 x16 white
Audio Device(s)	Audeze Maxwell Ultraviolet w/upgrade pads & LCD headband, Galaxy Buds 3 Pro, Razer Nommo Pro
Power Supply	SF750 Plat, full transparent custom cables, Sentinel Pro 1500 Online Double Conversion UPS w/Noctua
Mouse	Razer Viper V3 Pro 8 KHz Mercury White w/Tiger Ice Skates & Pulsar Supergrip tape, Razer Atlas
Keyboard	Wooting 60HE+ module, TOFU-R CNC Alu/Brass, SS Prismcaps W+Jellykey, LekkerV2 mod, TLabs Leath/Suede
Software	Windows 11 IoT Enterprise LTSC 24H2
Benchmark Scores	Legendary

System Name	Personal \\ Work - HP EliteBook 840 G6
Processor	7700X \\ i7-8565U
Motherboard	Asrock X670E PG Lightning
Cooling	Noctua DH-15
Memory	G.SKILL Trident Z5 RGB Black 32GB 6000MHz CL36 \\ 16GB DDR4-2400
Video Card(s)	ASUS RoG Strix 1070 Ti \\ Intel UHD Graphics 620
Storage	2x KC3000 2TB, Samsung 970 EVO 512GB \\ OEM 256GB NVMe SSD
Display(s)	BenQ XL2411Z \\ FullHD + 2x HP Z24i external screens via docking station
Case	Fractal Design Define Arc Midi R2 with window
Audio Device(s)	Realtek ALC1150 with Logitech Z533
Power Supply	Corsair AX860i
Mouse	Logitech G502
Keyboard	Corsair K55 RGB PRO
Software	Windows 11 \\ Windows 10

System Name	Nebulon B
Processor	AMD Ryzen 7 7800X3D
Motherboard	MSi PRO B650M-A WiFi
Cooling	be quiet! Dark Rock 4
Memory	2x 24 GB Corsair Vengeance DDR5-4800
Video Card(s)	AMD Radeon RX 6750 XT 12 GB
Storage	2 TB Corsair MP600 GS, 2 TB Corsair MP600 R2
Display(s)	Dell S3422DWG, 7" Waveshare touchscreen
Case	Kolink Citadel Mesh black
Audio Device(s)	Logitech Z333 2.1 speakers, AKG Y50 headphones
Power Supply	Seasonic Prime GX-750
Mouse	Logitech MX Master 2S
Keyboard	Logitech G413 SE
Software	Bazzite (Fedora Linux) KDE

Processor	AMD 7600x
Motherboard	Asrock x670e Steel Legend
Cooling	Silver Arrow Extreme IBe Rev B with 2x 120 Gentle Typhoons
Memory	4x16Gb Patriot Viper Non RGB @ 6000 30-36-36-36-40
Video Card(s)	XFX 6950XT MERC 319
Storage	2x Crucial P5 Plus 1Tb NVME
Display(s)	3x Dell Ultrasharp U2414h
Case	Coolermaster Stacker 832
Power Supply	Thermaltake Toughpower PF3 850 watt
Mouse	Logitech G502 (OG)
Keyboard	Logitech G512