my specs :
mb: asus TUF GAMING B550M-PLUS WIFI II
cpu :ryzen 7 5700x3d
ram : adata xpg d50 3000mhz 2*8gb (AX4U300038G 16A-DT50)
i updated the bios to latest version 3607 and the chipset
my problem is When I enable D.O.C.P from the BIOS and choose Profile 1, which is 3000 MHz CL16, my PC won't boot up and gets stuck on the motherboard logo. I tried setting it to 3000 MHz manually, but the same thing happened. The PC only boots up when I set it to 2400 MHz
i tried this timing 16-20-20-20-58 and it didnt boot at all i get lack screen
i put the sticks in the B2 and A2 in the ram slots
I managed to run my memory at 3000 MHz via D.O.C.P when I enabled performance mode in bios EZ Mode, but the CPU clock drops to 3.2 GHz and the voltage also and stays like that in every case.
I went back to normal mode in bios EZ Mode and encountered the same problem again, so I set the RAM to 2400 MHz to get my system to boot up
mb: asus TUF GAMING B550M-PLUS WIFI II
cpu :ryzen 7 5700x3d
ram : adata xpg d50 3000mhz 2*8gb (AX4U300038G 16A-DT50)
i updated the bios to latest version 3607 and the chipset
my problem is When I enable D.O.C.P from the BIOS and choose Profile 1, which is 3000 MHz CL16, my PC won't boot up and gets stuck on the motherboard logo. I tried setting it to 3000 MHz manually, but the same thing happened. The PC only boots up when I set it to 2400 MHz
i tried this timing 16-20-20-20-58 and it didnt boot at all i get lack screen
i put the sticks in the B2 and A2 in the ram slots
I managed to run my memory at 3000 MHz via D.O.C.P when I enabled performance mode in bios EZ Mode, but the CPU clock drops to 3.2 GHz and the voltage also and stays like that in every case.
I went back to normal mode in bios EZ Mode and encountered the same problem again, so I set the RAM to 2400 MHz to get my system to boot up