- Joined
- Oct 21, 2005
- Messages
- 7,012 (1.02/day)
- Location
- USA
System Name | Computer of Theseus |
---|---|
Processor | Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset) |
Motherboard | EVGA Z690 Classified |
Cooling | Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active |
Memory | G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK |
Video Card(s) | ASUS PROART RTX 4070 Ti-Super OC 16GB, 2670MHz, 0.93V |
Storage | 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data), ASUS BW-16D1HT (BluRay) |
Display(s) | Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms. |
Case | Lian Li O11 Air Mini |
Audio Device(s) | Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer |
Power Supply | Super Flower Leadex Platinum SE 1000W 80+ Platinum White, MODDIY 12VHPWR Cable |
Mouse | Zowie EC3-C |
Keyboard | Vortex Multix 87 Winter TKL (Gateron G Pro Yellow) |
Software | Win 10 LTSC 21H2 |
Some games and certain cuda accelerated programs seem to work better with constant clock rather than having it fluctuate, so I created a profile in MSI afterburner that locks my 4070Ti Super OC at 2625 Mhz Core and 1312 MHz Memory at 0.950 V. To create this profile, I took my normal undervolt power curve in afterburner and then hit L on the lowest voltage full boost node, then saved the profile.
I turn this profile on when I am using these applications and then I turn it off afterwards, so its usually on an hour or two. It typically doesn't get over 65C under load and the power draw is usually around 20W idle and 200 W load when its in this profile. It seems to idle around 40C.
Can this adversely affect my graphics card's lifespan? I doubt it but I figure I'd ask.
I turn this profile on when I am using these applications and then I turn it off afterwards, so its usually on an hour or two. It typically doesn't get over 65C under load and the power draw is usually around 20W idle and 200 W load when its in this profile. It seems to idle around 40C.
Can this adversely affect my graphics card's lifespan? I doubt it but I figure I'd ask.