Share your AIDA 64 cache and memory benchmark here

[Ruru]

With a tame Skylake system.

 

[P4-630]

With a tame Skylake system.

View attachment 345959

I had my previous skylake i7 also @ 4.5Ghz, with very low voltage, never tried anything higher though, sold it in 2022 when I upgraded to Alder lake.

 

[opheen]

MSI MPG z790i EDGE Wifi - 13600k - G.Skill Trident Z5 7600c34 2x16gb

8000c38 All timings AUTO

VCCSA 1.2v VDDQtx 1.4v VDD2 1.46v

VDD_mem & VDDQ_mem 1.52v\1.52v

 

[Det0x]

Fully maxed out 7800X3D memory system: 2x16gigs adie @ 8080MT/s CL32-45-40-44-84 + 2222mhz FCLK 2:1 mode
~275mb/s in karhu

Full screenshot with hwinfo included: ~22k karhu, ~1000% runmemtestpro, ~50min y-cruncher all tests

Fully maxed out 7800X3D memory system: 2x16gigs adie @ 8080MT/s CL32-45-40-44-84 + 2222mhz FCLK 2:1 mode
~275mb/s in karhu

Full screenshot with hwinfo included: ~22k karhu, ~1000% runmemtestpro, ~50min y-cruncher all tests

Maxed out 7800X3D in 1:1 mode
SR 2x16gigs adie @ 6666MT/s CL26-37-32-30-62 + 2222mhz FCLK

Full screenshot with hwinfo included: ~21k karhu, 25 cycles testmem5 1usmus, 90min y-cruncher all memtests only

 

[v310]

Is this ok?

 

[Hardi]

edit: and welcome to TPU : )

If everythings works fine, then yeah, its ok. vsoc seems a bit high, could prob. lower it to 1.2 i'd guess, or even lower.

heres mine, basically default expo i think, only tuned trfc and trefi a bit.. and vsoc from 1.25 to 1.15

 

[v310]

edit: and welcome to TPU : )

If everythings works fine, then yeah, its ok. vsoc seems a bit high, could prob. lower it to 1.2 i'd guess, or even lower.

heres mine, basically default expo i think, only tuned trfc and trefi a bit.. and vsoc from 1.25 to 1.15

View attachment 346539

Thanks for the info. I managed to get the vsoc down a little bit:

 

[Waldorf]

and i only get half the writes, even that im on a "dual ccx" chip
but a switch to am5 mb/cpu/ram wasnt possible on "unexpected" ~500$ to waste.
do like to be able to play most of my non-shooter/pvp stuff on power saving profile with max clocks limited to 60%

 

[mrcardio33x]

6060 MT/s CL26 35 32 36 / 2222 FCLK - 101 BCLK Mem
VDD: 1.53v VDDQ/IO: 1.35v VSOC: 1.185v

CPU: BCLK 105 - LLC7 - PBO Scaler X6 - Boost Clock (-) 150 MHz / 5150 MHz

+ 11.2% improved Latency / Bandwidth

vs.

EXPO "Tweaked"
6000 MT/s CL30 38 38 96 / 2000 FCLK
VDD: 1.35 VDDQ/IO: 1.30v VSOC: 1.20v

 

[mrcardio33x]

 

[lolek86]

 

[agent_x007]

Pushing Gear 1 at 1N, with no control over VCCIO2 voltage

 

[Sabotaged_Enigma]

View attachment 333353

How is TR 7960X doing AIDA64 GPGPU benchmark?

 

[msimax]

How is TR 7960X doing AIDA64 GPGPU benchmark?

ill have to add that to my todo list

 

[ador250]

I think I have one of the best vanilla Zen4 results. Same build and AGESA with 2 different mobo.

Mobo: MSI MAG B650M Mortar Wi-Fi

Mobo: Asrock B650 Pro RS Wi-Fi

ZenTimings:

 

[freeagent]

Its been awhile since I gave it a blast..

 

[vintologi]

First time running aida64 with my new OC

First time getting 6800 decently stable with tRP at 32.

Slight improvement:

View attachment 341167

But that's it now. Can't go any lower with the primary timings, the sub timings are also maxed out. For 6800 DR a good result I would say

Was that your first time running aida64 with that OC or did you run test(s) multiple times?

 

[mapnam charun]

Cheap aliexpress xeon kit motherboard quad channel.

 

[Atmaniac]

First time running aida64 with my new OC

I kinda doubt that your settings are stable. 32-40-32-30 are odd primarys and your L1 and L2 results are off. I would like to see 10-20 VT3 iterations in Y-Cruncher to really confirm that your settings are stable.

Your AIDA64 version is also outdated, please upgrade to a more recent version.

Was that your first time running aida64 with that OC or did you run test(s) multiple times?

Multiple times. Recently I switched to an 14900KS and the RAM tuning is almost done, expect new results soon.

 

[vintologi]

I kinda doubt that your settings are stable.

It failed stressapptest after 2000 seconds unfortunately. Stressapptest and y-cruncher are both really tough on the IMC and 6800 is pushing it with dual rank for raptor lake.

Setting tRP to 32 (instead of 34) did make it hard to get it stable in TM5.

 

[boomheadshot8]

1,54 V dimm
1.30 / 1.25 ; SA/IO

 

[Det0x]

This is about how low latency its possible to get on Zen5

 

[Tatili]

This is about how low latency its possible to get on Zen5

View attachment 357886

Hi all great results, did you are able to run DDR5-6600 with a 1:1 ratio between the MCLK and FCLK ?
Please lighting us and post ZenT, FCLK 2400 would be great to see indeed, thx in advance

 

[Dr. Dro]

Hi all great results, did you are able to run DDR5-6600 with a 1:1 ratio between the MCLK and FCLK ?
Please lighting us and post Zen Timmings would be great indeed, thx in advance

26-37-32-30? Those timings are utterly bonkers, if that's even being read right at all. But in the event it is legitimate - I wouldn't expect this to be reproducible on your average socket AM5 system.

Not to mention that is an engineering sample processor, at this stage it may or may not be a known golden sample (especially considering how rare AMD ES chips are, only people with connections usually get them) - and the ROG Gene motherboard is an optimized 1DPC model which is roughly the equivalent of the Apex series on Intel.

I dunno about that one, it's almost too good to be true. But nice

 

[freeagent]

The battle for dominance.. in my system