• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Intel Ships 0x129 Microcode Update for 13th and 14th Generation Processors with Stability Issues

Joined
Mar 7, 2023
Messages
897 (1.43/day)
System Name BarnacleMan
Processor 14700KF
Motherboard Gigabyte B760 Aorus Elite Ax DDR5
Cooling ARCTIC Liquid Freezer II 240 + P12 Max Fans
Memory 32GB Kingston Fury Beast
Video Card(s) Asus Tuf 4090 24GB
Storage 4TB sn850x, 2TB sn850x, 2TB Netac Nv7000 + 2TB p5 plus, 4TB MX500 * 2 = 18TB. Plus dvd burner.
Display(s) Dell 23.5" 1440P IPS panel
Case Lian Li LANCOOL II MESH Performance Mid-Tower
Audio Device(s) Logitech Z623
Power Supply Gigabyte 850w
This is the first statement they have made (at least that I have read) where they said they have identified and fixed the root cause.

The eTVB bug was something they discovered whilst investigating but they clearly stated it wasnt the root cause, the earliest news about board vendors shipping whacky defaults was also never claimed by Intel to be the root cause.
Which statement? The july statement? They didn't. They said elevated voltages were a cause of stability issues and they were releasing a microcode to address the root cause of said voltages. Thats not quite saying voltage is the root cause of instability. Its just the root cause of one of potentially multiple problems. Though I can see how it could be interpreted that way first glance (because thats how I read it first time too)

Or you mean the actual ucode release statement? Cause they didn't say root cause at all in that one. And both times they said they are 'continuing to investigate'. I just re-read it to make sure I didn't miss anything.

They did say "all future products will not be affected by this issue." but that could easily mean arrow and lunar lake wont be affected. Besides if thats not what they meant I don't see how it could be true, as intel stated they will not be shipping this with OS updates and you know there's gonna be people out there on ancient bioses with dangerous unconfigured settings.

Not sure if there is a point for me to install the new microcode, as I have no eTVB (i7) and my voltage requests are getting nowhere near 1.55v, they not even hitting 1.4v. Fairly happy with how I have the chip configured. I now think after seeing igor's binning data I have a better then average i7.

I get what you mean. I did do the update myself, but I'm personally not confident enough to be running my cpu full tilt right now so I have a million restrictions on it.... Probably went overboard but I really want to get a clearer picture of the situation before I go back up to 55x and 253. Plus this is enough for my needs anywho. General use and 4k 60 gaming really doesn't need that much from the cpu. The hardest I ever hear my fans spin up outside of benchmarks is when I'm decompressing something.
 
Last edited:
Joined
Feb 1, 2019
Messages
3,582 (1.69/day)
Location
UK, Midlands
System Name Main PC
Processor 13700k
Motherboard Asrock Z690 Steel Legend D4 - Bios 13.02
Cooling Noctua NH-D15S
Memory 32 Gig 3200CL14
Video Card(s) 4080 RTX SUPER FE 16G
Storage 1TB 980 PRO, 2TB SN850X, 2TB DC P4600, 1TB 860 EVO, 2x 3TB WD Red, 2x 4TB WD Red
Display(s) LG 27GL850
Case Fractal Define R4
Audio Device(s) Soundblaster AE-9
Power Supply Antec HCG 750 Gold
Software Windows 10 21H2 LTSC
Which statement? The july statement? They didn't. They said elevated voltages were a cause of stability issues and they were releasing a microcode to address the root cause of said voltages. Thats not quite saying voltage is the root cause of instability. Its just the root cause of one of potentially multiple problems. Though I can see how it could be interpreted that way first glance (because thats how I read it first time too)

Its possible I dont remember properly from the earliest statements, I think I just want to look forward now, as what's important here is how Intel are treating their customers with faulty chips, and if the new changes prevent degradation on chips that are working.

Below is with 121 hours of usage on the hwinfo session.

vids.png
 
Joined
Jun 7, 2018
Messages
172 (0.07/day)
System Name Carbon-14900K
Processor Intel i9-14900K
Motherboard MSI Z790 Carbon Wifi
Cooling Arctic Liquid Freezer III 360mm AIO
Memory G-Skill Trident Z5 4 x 16GB DDR5 6800
Video Card(s) Palit Game Rock RTX 4090
Storage Western digital Black SN850X 1&2TB - PCIe Gen 4 M.2-2 Western Digital Blue 1TB SN750 PCIe Gen 3
Display(s) MSI Optix MPG341CQR Ulta-wide 3440x1440p 144Hz and a Samsung 50 inch TV 4K TV
Case NZXT H7 Flow
Audio Device(s) Creative Sound Blaster X4
Power Supply NZXT C1200w Gold
Mouse Corsair M65 Pro Mouse
Keyboard Corsair STRAFE MK2 RGB
Software Windows 11 Pro
Benchmark Scores Cinebench R23 = 41070 Multicore test
Its possible I dont remember properly from the earliest statements, I think I just want to look forward now, as what's important here is how Intel are treating their customers with faulty chips, and if the new changes prevent degradation on chips that are working.

Below is with 121 hours of usage on the hwinfo session.

View attachment 358443
Your 24 hour run looks good to me. I had a 13700K before moving to a 14900K and I could run it at 1.298v with an adaptibve plus offset vcore. The 13700K is a fanatstic CPU.
 
Joined
Dec 31, 2020
Messages
980 (0.69/day)
Processor E5-4627 v4
Motherboard VEINEDA X99
Memory 32 GB
Video Card(s) 2080 Ti
Storage NE-512
Display(s) G27Q
Case DAOTECH X9
Power Supply SF450
Lowering the boost voltage on 1-2 cores by 50 millivolts doesn't remove the degradation, it just prolongs it, and it doesn't affect Vmin as much as long boost on all cores and that remains unchanged.
 
Joined
Mar 7, 2023
Messages
897 (1.43/day)
System Name BarnacleMan
Processor 14700KF
Motherboard Gigabyte B760 Aorus Elite Ax DDR5
Cooling ARCTIC Liquid Freezer II 240 + P12 Max Fans
Memory 32GB Kingston Fury Beast
Video Card(s) Asus Tuf 4090 24GB
Storage 4TB sn850x, 2TB sn850x, 2TB Netac Nv7000 + 2TB p5 plus, 4TB MX500 * 2 = 18TB. Plus dvd burner.
Display(s) Dell 23.5" 1440P IPS panel
Case Lian Li LANCOOL II MESH Performance Mid-Tower
Audio Device(s) Logitech Z623
Power Supply Gigabyte 850w
Its possible I dont remember properly from the earliest statements, I think I just want to look forward now, as what's important here is how Intel are treating their customers with faulty chips, and if the new changes prevent degradation on chips that are working.

Below is with 121 hours of usage on the hwinfo session.

View attachment 358443
Looks good to me. But I think part of the problem was that it was transient spikes not necessarily picked up by software that was at least part of the problem. Some bioses have an option to limit that. I did set one on mine but who knows if it works, I don't have oscilliscope. I guess thats why I feel better having that intel limit there too ( even though it still seems kinda high to me (1.55v) for an i7, I wonder if it scales down to lesser chips?).

With how I have my cpu setup right now my vcore usually stays at 1.2 under load but sometimes goes up to 1.25. I guess being that I've already had one cpu fail makes me extra paranoid.

Glad they finally let me turn CEP off though :)
 
Joined
Feb 1, 2019
Messages
3,582 (1.69/day)
Location
UK, Midlands
System Name Main PC
Processor 13700k
Motherboard Asrock Z690 Steel Legend D4 - Bios 13.02
Cooling Noctua NH-D15S
Memory 32 Gig 3200CL14
Video Card(s) 4080 RTX SUPER FE 16G
Storage 1TB 980 PRO, 2TB SN850X, 2TB DC P4600, 1TB 860 EVO, 2x 3TB WD Red, 2x 4TB WD Red
Display(s) LG 27GL850
Case Fractal Define R4
Audio Device(s) Soundblaster AE-9
Power Supply Antec HCG 750 Gold
Software Windows 10 21H2 LTSC
Looks good to me. But I think part of the problem was that it was transient spikes not necessarily picked up by software that was at least part of the problem. Some bioses have an option to limit that. I did set one on mine but who knows if it works, I don't have oscilliscope. I guess thats why I feel better having that intel limit there too ( even though it still seems kinda high to me (1.55v) for an i7, I wonder if it scales down to lesser chips?).

With how I have my cpu setup right now my vcore usually stays at 1.2 under load but sometimes goes up to 1.25. I guess being that I've already had one cpu fail makes me extra paranoid.

Glad they finally let me turn CEP off though :)
My vcore is typically around 50mv below the highest VID. I might see around 1.28v on high max clock single core load and lower around 1.25v if I run something like cinebench.

You may be right about potential hidden very brief transients, but there is people who have had 1.6 detected in hwinfo such as jay2cents and buildzoid, so there is chips that have been going that high and can see in software. So I wouldnt worry too much about it with the voltages you are reporting.
 
Joined
Sep 17, 2014
Messages
22,437 (6.03/day)
Location
The Washing Machine
Processor 7800X3D
Motherboard MSI MAG Mortar b650m wifi
Cooling Thermalright Peerless Assassin
Memory 32GB Corsair Vengeance 30CL6000
Video Card(s) ASRock RX7900XT Phantom Gaming
Storage Lexar NM790 4TB + Samsung 850 EVO 1TB + Samsung 980 1TB + Crucial BX100 250GB
Display(s) Gigabyte G34QWC (3440x1440)
Case Lian Li A3 mATX White
Audio Device(s) Harman Kardon AVR137 + 2.1
Power Supply EVGA Supernova G2 750W
Mouse Steelseries Aerox 5
Keyboard Lenovo Thinkpad Trackpoint II
Software W11 IoT Enterprise LTSC
Benchmark Scores Over 9000
Even if their competition is in great position, some tech channels and probably tech sites, will convince their audiences/readers that's in fact, the other way around
View attachment 358399
Hey, look, clickbaity videos with clickbaity titles try to get ad revenue! My god! This never before seen fact must be recorded in history books, quickly.
 
Joined
Mar 7, 2023
Messages
897 (1.43/day)
System Name BarnacleMan
Processor 14700KF
Motherboard Gigabyte B760 Aorus Elite Ax DDR5
Cooling ARCTIC Liquid Freezer II 240 + P12 Max Fans
Memory 32GB Kingston Fury Beast
Video Card(s) Asus Tuf 4090 24GB
Storage 4TB sn850x, 2TB sn850x, 2TB Netac Nv7000 + 2TB p5 plus, 4TB MX500 * 2 = 18TB. Plus dvd burner.
Display(s) Dell 23.5" 1440P IPS panel
Case Lian Li LANCOOL II MESH Performance Mid-Tower
Audio Device(s) Logitech Z623
Power Supply Gigabyte 850w
Hey, look, clickbaity videos with clickbaity titles try to get ad revenue! My god! This never before seen fact must be recorded in history books, quickly.
Whats sad is you pretty much have to play that game to make a viable business out of youtube. I do try to understand that, and not necessarily disregard what is said, because the content might be fair and reasonable.... even if the thumbnail and clickbait title aren't. (and I'm not necessarily talking about hardware unboxed - so many channels do it, whether there's quality content or not)
My vcore is typically around 50mv below the highest VID. I might see around 1.28v on high max clock single core load and lower around 1.25v if I run something like cinebench.
Really? I had to do a fair bit of underclocking to get near the same values you're getting -_-. x50 and x35. I figure there will probably be a point where I want to clock back up when I'm in need of some more power and if I'm a little more convinced it wont kill my chip.. then I'll be dealing with higher vcores. Maybe I could do a middle ground like x53. Possibly reduce ac loadline a tiny bit more.... What do you run your all pcore at? 5.3?

Anyway sorry I'm dragging us off topic aren't I?

Well I ran a couple benchmarks with the same settings and I saw no difference between 123 and 129. So there's that.... though I'm probably not the best test case with these settings.
 
Joined
Apr 19, 2018
Messages
1,227 (0.51/day)
Processor AMD Ryzen 9 5950X
Motherboard Asus ROG Crosshair VIII Hero WiFi
Cooling Arctic Liquid Freezer II 420
Memory 32Gb G-Skill Trident Z Neo @3806MHz C14
Video Card(s) MSI GeForce RTX2070
Storage Seagate FireCuda 530 1TB
Display(s) Samsung G9 49" Curved Ultrawide
Case Cooler Master Cosmos
Audio Device(s) O2 USB Headphone AMP
Power Supply Corsair HX850i
Mouse Logitech G502
Keyboard Cherry MX
Software Windows 11
So they don't fix the problem with the over-volting, they just make the thing idle more. They can't have that performance taken away by limiting voltage to 1.35, so they let it still get up to 1.44, but only under load. So degradation still will still happen, but the extended low voltage, low speed idle will help it last longer, and certainly won't help an already degraded CPU.
 
Last edited:
Joined
Sep 6, 2013
Messages
3,329 (0.81/day)
Location
Athens, Greece
System Name 3 desktop systems: Gaming / Internet / HTPC
Processor Ryzen 5 5500 / Ryzen 5 4600G / FX 6300 (12 years latter got to see how bad Bulldozer is)
Motherboard MSI X470 Gaming Plus Max (1) / MSI X470 Gaming Plus Max (2) / Gigabyte GA-990XA-UD3
Cooling Νoctua U12S / Segotep T4 / Snowman M-T6
Memory 32GB - 16GB G.Skill RIPJAWS 3600+16GB G.Skill Aegis 3200 / 16GB JUHOR / 16GB Kingston 2400MHz (DDR3)
Video Card(s) ASRock RX 6600 + GT 710 (PhysX)/ Vega 7 integrated / Radeon RX 580
Storage NVMes, ONLY NVMes/ NVMes, SATA Storage / NVMe boot(Clover), SATA storage
Display(s) Philips 43PUS8857/12 UHD TV (120Hz, HDR, FreeSync Premium) ---- 19'' HP monitor + BlitzWolf BW-V5
Case Sharkoon Rebel 12 / CoolerMaster Elite 361 / Xigmatek Midguard
Audio Device(s) onboard
Power Supply Chieftec 850W / Silver Power 400W / Sharkoon 650W
Mouse CoolerMaster Devastator III Plus / CoolerMaster Devastator / Logitech
Keyboard CoolerMaster Devastator III Plus / CoolerMaster Devastator / Logitech
Software Windows 10 / Windows 10&Windows 11 / Windows 10
So they don't fix the problem with the over-volting, they just make the thing idle more. They can't have that performance taken away by limiting voltage to 1.35, so they let it still get up to 1.44, but only under load.
I don't know about modern Intel CPUs, but they might fear that if they lower voltage too much, not so good chips might start showing instability problems because of insufficient voltage. There might be chips out there that will be unstable with "only" 1.35V.
 
Joined
Sep 17, 2014
Messages
22,437 (6.03/day)
Location
The Washing Machine
Processor 7800X3D
Motherboard MSI MAG Mortar b650m wifi
Cooling Thermalright Peerless Assassin
Memory 32GB Corsair Vengeance 30CL6000
Video Card(s) ASRock RX7900XT Phantom Gaming
Storage Lexar NM790 4TB + Samsung 850 EVO 1TB + Samsung 980 1TB + Crucial BX100 250GB
Display(s) Gigabyte G34QWC (3440x1440)
Case Lian Li A3 mATX White
Audio Device(s) Harman Kardon AVR137 + 2.1
Power Supply EVGA Supernova G2 750W
Mouse Steelseries Aerox 5
Keyboard Lenovo Thinkpad Trackpoint II
Software W11 IoT Enterprise LTSC
Benchmark Scores Over 9000
Click bait titles used only on AMD videos is also something never before seen in tech press.
Intel having a hell of a month and videos about AMD been bad being 5 times more than videos about Intel, is probably also normal.
Anyway, I guess HUB is just one example anyway (with over 1 million subscribers).


In a month where every one talks about Intel, HUB making 5 videos about AMD to prove that AMD is bad for consumers and one video about Intel where we see a calm and skeptical Steve talking about what is already known, does makes someone wonder if the objectivity targets only one company.
I don't try to overanalyze what happens daily on the big bad internet. The whole game is rigged, this has been clear since 1999, come on.

Its to individuals to filter the bullshit and hopefully they end up with something that makes sense. Or, you can just do a whole lot less of internet-based information truth seeking and probably end up wiser. Are you saying HUB's in bed with Intel now, I mean... lol
 
Joined
Dec 1, 2022
Messages
178 (0.25/day)
I don't know about modern Intel CPUs, but they might fear that if they lower voltage too much, not so good chips might start showing instability problems because of insufficient voltage. There might be chips out there that will be unstable with "only" 1.35V.
Anything above 1.4V still sounds way too high, core VID is also tied to ring bus voltage. I doubt slightly lower voltage will be a fix, just a band aid until the media isn't reporting on it anymore. The people running OEM systems are really screwed if there is no patch delivered through windows update as only tech enthusiasts and gamers are messing with BIOS flashing.
I'd like to see someone do long term testing for stability, though I doubt it'll happen as you said tech youtubers will all move on to Arrow Lake. The majority of tech youtubers wouldn't want to risk upsetting intel for their free review samples.
 
Last edited by a moderator:
Joined
Mar 7, 2023
Messages
897 (1.43/day)
System Name BarnacleMan
Processor 14700KF
Motherboard Gigabyte B760 Aorus Elite Ax DDR5
Cooling ARCTIC Liquid Freezer II 240 + P12 Max Fans
Memory 32GB Kingston Fury Beast
Video Card(s) Asus Tuf 4090 24GB
Storage 4TB sn850x, 2TB sn850x, 2TB Netac Nv7000 + 2TB p5 plus, 4TB MX500 * 2 = 18TB. Plus dvd burner.
Display(s) Dell 23.5" 1440P IPS panel
Case Lian Li LANCOOL II MESH Performance Mid-Tower
Audio Device(s) Logitech Z623
Power Supply Gigabyte 850w
So they don't fix the problem with the over-volting, they just make the thing idle more. They can't have that performance taken away by limiting voltage to 1.35, so they let it still get up to 1.44, but only under load. So degradation still will still happen, but the extended low voltage, low speed idle will help it last longer.
Well hey intel put themselves into quite a pickle here. They advertised high clock speeds, that on weaker silicon require unsafe voltages. And now chips are becoming unstable because of it.... What do you do? You want to increase voltage to increase stability but you also want to decrease voltage to stop the chips from degrading and becoming unstable in the first place. Its like they're being pushed from both sides. I imagine thats why the change isn't that big. And I imagine thats why they keep repeating the whole rma your chip if there's been any instability thus far thing.

But it does look like they are at least attempting to take steps in the right direction, so I gotta give em some credit. Two years of extra warranty is nice.
 
Joined
Apr 19, 2018
Messages
1,227 (0.51/day)
Processor AMD Ryzen 9 5950X
Motherboard Asus ROG Crosshair VIII Hero WiFi
Cooling Arctic Liquid Freezer II 420
Memory 32Gb G-Skill Trident Z Neo @3806MHz C14
Video Card(s) MSI GeForce RTX2070
Storage Seagate FireCuda 530 1TB
Display(s) Samsung G9 49" Curved Ultrawide
Case Cooler Master Cosmos
Audio Device(s) O2 USB Headphone AMP
Power Supply Corsair HX850i
Mouse Logitech G502
Keyboard Cherry MX
Software Windows 11
I'll leave this here so we can see what this microcode fix really does.

 
Joined
Sep 6, 2013
Messages
3,329 (0.81/day)
Location
Athens, Greece
System Name 3 desktop systems: Gaming / Internet / HTPC
Processor Ryzen 5 5500 / Ryzen 5 4600G / FX 6300 (12 years latter got to see how bad Bulldozer is)
Motherboard MSI X470 Gaming Plus Max (1) / MSI X470 Gaming Plus Max (2) / Gigabyte GA-990XA-UD3
Cooling Νoctua U12S / Segotep T4 / Snowman M-T6
Memory 32GB - 16GB G.Skill RIPJAWS 3600+16GB G.Skill Aegis 3200 / 16GB JUHOR / 16GB Kingston 2400MHz (DDR3)
Video Card(s) ASRock RX 6600 + GT 710 (PhysX)/ Vega 7 integrated / Radeon RX 580
Storage NVMes, ONLY NVMes/ NVMes, SATA Storage / NVMe boot(Clover), SATA storage
Display(s) Philips 43PUS8857/12 UHD TV (120Hz, HDR, FreeSync Premium) ---- 19'' HP monitor + BlitzWolf BW-V5
Case Sharkoon Rebel 12 / CoolerMaster Elite 361 / Xigmatek Midguard
Audio Device(s) onboard
Power Supply Chieftec 850W / Silver Power 400W / Sharkoon 650W
Mouse CoolerMaster Devastator III Plus / CoolerMaster Devastator / Logitech
Keyboard CoolerMaster Devastator III Plus / CoolerMaster Devastator / Logitech
Software Windows 10 / Windows 10&Windows 11 / Windows 10
JayZ also made a video and talks about voltages
 
Joined
Dec 25, 2020
Messages
6,712 (4.70/day)
Location
São Paulo, Brazil
System Name "Icy Resurrection"
Processor 13th Gen Intel Core i9-13900KS Special Edition
Motherboard ASUS ROG MAXIMUS Z790 APEX ENCORE
Cooling Noctua NH-D15S upgraded with 2x NF-F12 iPPC-3000 fans and Honeywell PTM7950 TIM
Memory 32 GB G.SKILL Trident Z5 RGB F5-6800J3445G16GX2-TZ5RK @ 7600 MT/s 36-44-44-52-96 1.4V
Video Card(s) ASUS ROG Strix GeForce RTX™ 4080 16GB GDDR6X White OC Edition
Storage 500 GB WD Black SN750 SE NVMe SSD + 4 TB WD Red Plus WD40EFPX HDD
Display(s) 55-inch LG G3 OLED
Case Pichau Mancer CV500 White Edition
Power Supply EVGA 1300 G2 1.3kW 80+ Gold
Mouse Microsoft Classic Intellimouse
Keyboard Generic PS/2
Software Windows 11 IoT Enterprise LTSC 24H2
Benchmark Scores I pulled a Qiqi~
I'll leave this here so we can see what this microcode fix really does.


Interesting that I also have an Apex Encore and KS CPU and I haven't found any meaningful degradation of performance on my end. My KS is the 13th Gen one but it's only 200-300 MHz below the 14th, or effectively about the same as the 14900K... i fail to see how I've been scammed
 
Joined
Feb 1, 2019
Messages
3,582 (1.69/day)
Location
UK, Midlands
System Name Main PC
Processor 13700k
Motherboard Asrock Z690 Steel Legend D4 - Bios 13.02
Cooling Noctua NH-D15S
Memory 32 Gig 3200CL14
Video Card(s) 4080 RTX SUPER FE 16G
Storage 1TB 980 PRO, 2TB SN850X, 2TB DC P4600, 1TB 860 EVO, 2x 3TB WD Red, 2x 4TB WD Red
Display(s) LG 27GL850
Case Fractal Define R4
Audio Device(s) Soundblaster AE-9
Power Supply Antec HCG 750 Gold
Software Windows 10 21H2 LTSC
Whats sad is you pretty much have to play that game to make a viable business out of youtube. I do try to understand that, and not necessarily disregard what is said, because the content might be fair and reasonable.... even if the thumbnail and clickbait title aren't. (and I'm not necessarily talking about hardware unboxed - so many channels do it, whether there's quality content or not)

Really? I had to do a fair bit of underclocking to get near the same values you're getting -_-. x50 and x35. I figure there will probably be a point where I want to clock back up when I'm in need of some more power and if I'm a little more convinced it wont kill my chip.. then I'll be dealing with higher vcores. Maybe I could do a middle ground like x53. Possibly reduce ac loadline a tiny bit more.... What do you run your all pcore at? 5.3?

Anyway sorry I'm dragging us off topic aren't I?

Well I ran a couple benchmarks with the same settings and I saw no difference between 123 and 129. So there's that.... though I'm probably not the best test case with these settings.
I am using stock clocks, not touched them, so 5.4ghz on the two best cores and 5.3 the rest, as I said I think I have a good chip.

The VIDs I pasted here are also using Intel spec'd AC/DC.

Here is pic of my configured undervolt, although actual undervolt seems a bit lower.

I swear I backed these off to 50mv for daily o_O. Guess I didnt.

1723372687660.png


1723372787909.png


Your test is not surprising as I think the microcode is not making any adjustment with your current voltages.
 

the54thvoid

Super Intoxicated Moderator
Staff member
Joined
Dec 14, 2009
Messages
13,048 (2.39/day)
Location
Glasgow - home of formal profanity
Processor Ryzen 7800X3D
Motherboard MSI MAG Mortar B650 (wifi)
Cooling be quiet! Dark Rock Pro 4
Memory 32GB Kingston Fury
Video Card(s) Gainward RTX4070ti
Storage Seagate FireCuda 530 M.2 1TB / Samsumg 960 Pro M.2 512Gb
Display(s) LG 32" 165Hz 1440p GSYNC
Case Asus Prime AP201
Audio Device(s) On Board
Power Supply be quiet! Pure POwer M12 850w Gold (ATX3.0)
Software W10
Sorry for the deletions, but this is an Intel thread.

It's not about AMD. Leave your AMD baggage at the door, thanks.
 
Joined
Apr 19, 2018
Messages
1,227 (0.51/day)
Processor AMD Ryzen 9 5950X
Motherboard Asus ROG Crosshair VIII Hero WiFi
Cooling Arctic Liquid Freezer II 420
Memory 32Gb G-Skill Trident Z Neo @3806MHz C14
Video Card(s) MSI GeForce RTX2070
Storage Seagate FireCuda 530 1TB
Display(s) Samsung G9 49" Curved Ultrawide
Case Cooler Master Cosmos
Audio Device(s) O2 USB Headphone AMP
Power Supply Corsair HX850i
Mouse Logitech G502
Keyboard Cherry MX
Software Windows 11
Interesting that I also have an Apex Encore and KS CPU and I haven't found any meaningful degradation of performance on my end. My KS is the 13th Gen one but it's only 200-300 MHz below the 14th, or effectively about the same as the 14900K... i fail to see how I've been scammed
Comprehension is king. Watch the video this time, and don't just react to the title, as he explains exactly why he makes that statement.
 
Joined
Jun 7, 2018
Messages
172 (0.07/day)
System Name Carbon-14900K
Processor Intel i9-14900K
Motherboard MSI Z790 Carbon Wifi
Cooling Arctic Liquid Freezer III 360mm AIO
Memory G-Skill Trident Z5 4 x 16GB DDR5 6800
Video Card(s) Palit Game Rock RTX 4090
Storage Western digital Black SN850X 1&2TB - PCIe Gen 4 M.2-2 Western Digital Blue 1TB SN750 PCIe Gen 3
Display(s) MSI Optix MPG341CQR Ulta-wide 3440x1440p 144Hz and a Samsung 50 inch TV 4K TV
Case NZXT H7 Flow
Audio Device(s) Creative Sound Blaster X4
Power Supply NZXT C1200w Gold
Mouse Corsair M65 Pro Mouse
Keyboard Corsair STRAFE MK2 RGB
Software Windows 11 Pro
Benchmark Scores Cinebench R23 = 41070 Multicore test
So they don't fix the problem with the over-volting, they just make the thing idle more. They can't have that performance taken away by limiting voltage to 1.35, so they let it still get up to 1.44, but only under load. So degradation still will still happen, but the extended low voltage, low speed idle will help it last longer, and certainly won't help an already degraded CPU.
I doubt it, 1.4v is too rich for me and has always been that way. 1.5v and above being the critcal danger area. The new bios is limiting voltage at load and at idle...Remember under load the voltage always drops, it is the spikes to 1.5 and in some cases 1.6v which are the problem and with motherboard manufacturers doing some crazy voltage and LLC tweaking for some of the auto/enhanced profiles thatyt were more than absurd allowed this situation to happen. Yes, Intel are to blame as well for not enforcing a baseline profile as the stock setting, probably in an effort to keep parity with the X3D cpu's that were doing so well on the gaming side and the fact they wanted to win the GHz war!

I have yet to have a CPU fail on me in some 30 years of using a mix of AMD going back to the Athlon days and the old 386DX series, with some of the CPU's that I have used going well beyond 6 years overclocked, the17-2600K being one and that massivly overclocked. With what has happened now to Intel, I would not be surprised if this was the catallyst for AMD to pull the launch by a few weeks in order to enforce effeciency and keep things in the lower bound. If you use PBO then it is on you and not AMD if things go wrong.

limiting the CPU to 1.350v should be fine for the long run, but ultimatly with the 2 year extended warranty, it is a step forward along with accepting RMA's and not qquibbling with the customer. MSI has also extended warranties on all pre-builts and laptops with 13th and 14th gen so another positive. I would not be surprised if quiet a few do RMA and exchange just before the extended warranty runs out.

If you think your CPU has degraded, then hit Intel with an RMA immidiatly. They are turning things around in 5 to 7 days as I was onto to Intel to clarify this very issue and the responded fast.

Cut and paste from the email recieved from Intel customer support:

The process works in such a way that one of our logistics partner will collect the defective unit from your address and send it to our depot. After a quick verification process in depot, a new unit is sent to you.

You'll receive the replacement unit in 5-7 working days from the time you submit the faulty unit.

Please let me know if its okay for me to proceed with the replacement option. If you wish to proceed with replacement, please help me with your complete shipping address and CPU markings (FPO and ATPO).

I hope to hear back from you soon.

Best regards,

XXXXX (I cut his name out)
Intel Customer Support
 
Joined
Dec 25, 2020
Messages
6,712 (4.70/day)
Location
São Paulo, Brazil
System Name "Icy Resurrection"
Processor 13th Gen Intel Core i9-13900KS Special Edition
Motherboard ASUS ROG MAXIMUS Z790 APEX ENCORE
Cooling Noctua NH-D15S upgraded with 2x NF-F12 iPPC-3000 fans and Honeywell PTM7950 TIM
Memory 32 GB G.SKILL Trident Z5 RGB F5-6800J3445G16GX2-TZ5RK @ 7600 MT/s 36-44-44-52-96 1.4V
Video Card(s) ASUS ROG Strix GeForce RTX™ 4080 16GB GDDR6X White OC Edition
Storage 500 GB WD Black SN750 SE NVMe SSD + 4 TB WD Red Plus WD40EFPX HDD
Display(s) 55-inch LG G3 OLED
Case Pichau Mancer CV500 White Edition
Power Supply EVGA 1300 G2 1.3kW 80+ Gold
Mouse Microsoft Classic Intellimouse
Keyboard Generic PS/2
Software Windows 11 IoT Enterprise LTSC 24H2
Benchmark Scores I pulled a Qiqi~
Comprehension is king. Watch the video this time, and don't just react to the title, as he explains exactly why he makes that statement.

Yes I've looked at the video, his experience does not seem to reflect my own. My power consumption actually went down compared to what he seems to be experiencing. I wonder if it's specific to the i9-14900KS, since mine is the 13900KS
 
Joined
Apr 19, 2018
Messages
1,227 (0.51/day)
Processor AMD Ryzen 9 5950X
Motherboard Asus ROG Crosshair VIII Hero WiFi
Cooling Arctic Liquid Freezer II 420
Memory 32Gb G-Skill Trident Z Neo @3806MHz C14
Video Card(s) MSI GeForce RTX2070
Storage Seagate FireCuda 530 1TB
Display(s) Samsung G9 49" Curved Ultrawide
Case Cooler Master Cosmos
Audio Device(s) O2 USB Headphone AMP
Power Supply Corsair HX850i
Mouse Logitech G502
Keyboard Cherry MX
Software Windows 11
Yes I've looked at the video, his experience does not seem to reflect my own. My power consumption actually went down compared to what he seems to be experiencing. I wonder if it's specific to the i9-14900KS, since mine is the 13900KS
Yeah, it's possible. I think they pushed the 14 a few megahertz higher.

Are you monitoring your CPU vids in HWInfo during a few different games to see what the vids are doing? And did you do this before the flash to be able comparison of behaviour?
 
Joined
Feb 1, 2019
Messages
3,582 (1.69/day)
Location
UK, Midlands
System Name Main PC
Processor 13700k
Motherboard Asrock Z690 Steel Legend D4 - Bios 13.02
Cooling Noctua NH-D15S
Memory 32 Gig 3200CL14
Video Card(s) 4080 RTX SUPER FE 16G
Storage 1TB 980 PRO, 2TB SN850X, 2TB DC P4600, 1TB 860 EVO, 2x 3TB WD Red, 2x 4TB WD Red
Display(s) LG 27GL850
Case Fractal Define R4
Audio Device(s) Soundblaster AE-9
Power Supply Antec HCG 750 Gold
Software Windows 10 21H2 LTSC
I'll leave this here so we can see what this microcode fix really does.

That was a hard watch, dude goes on about his community having no misinformation, then posts this video.

He doesnt know why the new microcode is preventing his 6ghz clocks, thats because the eTVB fix now will downclock when CPU is over 80C, he had cores over 80C. (0x125 bios before the latest)

Then says 1.4v is going to degrade these CPUs, different to Intel's own statement, my 8600k ran at 1,4v out of the box as an example.

He seems baffled his circa 1.4v didnt change yet quote from the OP of this thread. "The latest 0x129 microcode patch will limit the processor's voltage to no higher than 1.55 V, which should avoid further degradation."

Jay's video is much better, just presenting data with only a small comment at end on what he thought it meant.
 
Joined
Jun 7, 2018
Messages
172 (0.07/day)
System Name Carbon-14900K
Processor Intel i9-14900K
Motherboard MSI Z790 Carbon Wifi
Cooling Arctic Liquid Freezer III 360mm AIO
Memory G-Skill Trident Z5 4 x 16GB DDR5 6800
Video Card(s) Palit Game Rock RTX 4090
Storage Western digital Black SN850X 1&2TB - PCIe Gen 4 M.2-2 Western Digital Blue 1TB SN750 PCIe Gen 3
Display(s) MSI Optix MPG341CQR Ulta-wide 3440x1440p 144Hz and a Samsung 50 inch TV 4K TV
Case NZXT H7 Flow
Audio Device(s) Creative Sound Blaster X4
Power Supply NZXT C1200w Gold
Mouse Corsair M65 Pro Mouse
Keyboard Corsair STRAFE MK2 RGB
Software Windows 11 Pro
Benchmark Scores Cinebench R23 = 41070 Multicore test
Yeah, it's possible. I think they pushed the 14 a few megahertz higher.

Are you monitoring your CPU vids in HWInfo during a few different games to see what the vids are doing? And did you do this before the flash to be able comparison of behaviour?
Probably open a can of worms...but isn't VCore the actual voltage your CPU is using, VID is the voltage your CPU is asking for based on a set of internal tables for max voltage...Always been a confusing area....
VID voltage can be said as the maximum that can be tolerated by the CPU system under a given clock speed. Whereas Vcore is the actual reading for the cores. In simple terms, VID is the upper cap on the voltage specifications of the system.
 

#22

Joined
Apr 13, 2023
Messages
413 (0.70/day)
Location
Warszawa
Probably open a can of worms...but isn't VCore the actual voltage your CPU is using, VID is the voltage your CPU is asking for based on a set of internal tables for max voltage...Always been a confusing area....
VID voltage can be said as the maximum that can be tolerated by the CPU system under a given clock speed. Whereas Vcore is the actual reading for the cores. In simple terms, VID is the upper cap on the voltage specifications of the system.

This is the thing I don't get, I mean people concerned about VID being high. Isn't VID exactly what you say, so voltage CPU asks for, but one it gets being Vcore, so Vcore should be the one to concern? Btw what exact voltages are the ones to be concerned in the matter of this whole instability drama?
 
Top