- Joined
- Feb 20, 2019
- Messages
- 8,280 (3.93/day)
System Name | Bragging Rights |
---|---|
Processor | Atom Z3735F 1.33GHz |
Motherboard | It has no markings but it's green |
Cooling | No, it's a 2.2W processor |
Memory | 2GB DDR3L-1333 |
Video Card(s) | Gen7 Intel HD (4EU @ 311MHz) |
Storage | 32GB eMMC and 128GB Sandisk Extreme U3 |
Display(s) | 10" IPS 1280x800 60Hz |
Case | Veddha T2 |
Audio Device(s) | Apparently, yes |
Power Supply | Samsung 18W 5V fast-charger |
Mouse | MX Anywhere 2 |
Keyboard | Logitech MX Keys (not Cherry MX at all) |
VR HMD | Samsung Oddyssey, not that I'd plug it into this though.... |
Software | W10 21H1, barely |
Benchmark Scores | I once clocked a Celeron-300A to 564MHz on an Abit BE6 and it scored over 9000. |
Your insanity and delusional nonsense continue to entertain.the right way to count how old a product is to count the time between its set-in-stone, tape-out, or set-in-stone decision / feature set.
Tape-out and product launch are at a bare minimum, 6 months apart and have been 2+ years on several notable occasions where redesigns were required after the initial tape-out. Tape-out is one of the product development phases, but there's no way to know if any tape-out will be final until the silicon is received back and tested months later. Saying that a tape-out is the time at which a product is set-in-stone proves that you have absolutely no idea what you're talking about.
By your metrics, Nvidia Blackwell GPUs, slated to launch in early 2025 are already 18 months old!
Here's another shovel if you want to keep digging...